2024

• Wehrend, Sven; Schwan, Lukas; Zumach, Katharina; Krause, Dieter
  Potenziale zur Steigerung der Nachhaltigkeit in der Flugzeugkabine
  73. Deutscher Luft- und Raumfahrtkongress (DLRK 2024)
  Verlags DOI
• Schmiech, Jonte; Wegner, Marie; Wortmann, Nadine; Sobirey, Eve; De Sousa Guerreiro, Helena I.; Kyselyova, Anna; Ramdani, Nora; Krause, Dieter
  HANNES: A Modular Neurointerventional Training Model
  Journal of engineering and science in medical diagnostics and therapy 8 (3): JESMDT-24-1026 (2024-11-21)
  Verlags DOI
• Berschik, Markus Christian; Züfle, Marc; Laukotka, Fabian N.; Krause, Dieter
  Product family engineering along the life cycle – research aspects to cope with variability in advanced systems
  Design science 10: e27 (2024-10-31)
  Verlags DOI
• Mei, Yikun; Lakotsenina, Elena; Wegner, Marie; Hehne, Timon; Krause, Dieter; Hakimeh, Dani; Wu, Dongwei; Schültke, Elisabeth; Hausmann, Franziska; Kurreck, Jens; Tolksdorf, Beatrice
  Three-Dimensional-Bioprinted Non-Small Cell Lung Cancer Models in a Mouse Phantom for Radiotherapy Research
  International Journal of Molecular Sciences 25 (19): 10268 (2024)
  Open Access | Verlags DOI
• Hüttich, Philipp; Krause, Dieter
  Holistic approach to vibration characterization of large structural components in thermal environment
  31st International Conference on Noise and Vibration Engineering (ISMA 2024)
  
• Schmiech, Jonte; Sobirey, Eve; Wegner, Marie; Krause, Dieter; Arulrajah, Kugarajah
  Development and Evaluation of a Modular EVAR Training Model for the Simulator HANNES
  Additive Manufacturing Meets Medicine (AMMM 2024)
  Verlags DOI
• Wegner, Marie; Krause, Dieter
  3D printed phantoms for medical imaging : recent developments and challenges
  Journal of mechanical science and technology 38 (9): 4537-4543 (2024-09-01)
  Open Access | Verlags DOI
• Schmiech, Jonte; De Sousa Guerreiro, Helena I.; Sobirey, Eve; Wegner, Marie; Belakhal, Besma; Ramdani, Nora; Fiehler, Jens; Krause, Dieter
  A Novel Vessel Rupture Model for Neurointerventional Training
  Additive Manufacturing Meets Medicine (AMMM 2024)
  Verlags DOI
• Wegner, Marie; Rosendal, Maike; Hinrichsen, Nina; Krause, Dieter; Gargioni, Elisabetta
  Creation and analysis of additive-manufactured CT-equivalent phantom tissue surrogates
  Additive Manufacturing Meets Medicine (AMMM 2024)
  Open Access | Verlags DOI
• Wegner, Marie; Alizadeh Azbari, Niusha; Krause, Dieter; Gargioni, Elisabetta
  Development and Evaluation of a 3D Printed Modular Phantom of the Lower Extremities for Optimization and Evaluation of TBI Technique
  5th European Congress of Medical Physics (ECMP 2024)
  Open Access | Verlags DOI
• Wegner, Marie; Stölzel, Katharina; Breitsprecher, Tabita; Krause, Dieter; Praetorius, Mark
  Development of a 3D printed paranasal sinus system prototype for endoscopic surgery training
  Additive Manufacturing Meets Medicine (AMMM 2024)
  Open Access | Verlags DOI
• Wegner, Marie; Rosendahl, Maike; Krause, Dieter; Gargioni, Elisabetta
  Development of an Additive Manufactured Anthropomorphic CBCT Imaging Head Phantom
  European Congress of Medical Physics (2024)
  Open Access | Verlags DOI
• Berschik, Markus Christian; Wehrend, Sven; Laukotka, Fabian N.; Krause, Dieter
  Digitalisation and Sustainability in Cabin Design : Synergies and Dependencies
  34th Congress of the International Council of the Aeronautical Sciences (ICAS 2024)
  Open Access
• Rosendahl, Maike; Wegner, Marie; Krause, Dieter; Gargioni, Elisabetta
  Simulation Of A Clinical Cbct Imaging System With The Monte Carlo Method
  5th European Congress of Medical Physics (ECMP 2024)
  Open Access | Verlags DOI
• Wehrend, Sven; Schwan, Lukas; Zumach, Katharina; Krause, Dieter
  Towards a holistic approach to increase sustainability in aircraft cabin design
  34th Congress of the International Council of the Aeronautical Sciences (ICAS 2024): 1-13
  Open Access
• Reuter, Niklas; Panek, Stefan; Kriegesmann, Benedikt; Balokas, Georgios; Hartwich, Tobias S.; Krause, Dieter
  Experimental investigation and probabilistic analysis of the buckling load of isotropic cylinders under multiaxial loading
  Thin-Walled Structures 205: 112379 (2024-08-30)
  Open Access | Verlags DOI
• Laukotka, Fabian N.; Krause, Dieter
  Improving Knowledge Capture, Access, and Reuse by a Model-Based and Data-Driven Management Using the Example of Aviation’s Retrofit
  ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC-CIE 2024)
  Verlags DOI
• Wegner, Marie; Schmiech, Jonte; Sobirey, Eve; Krause, Dieter; Gargioni, Elisabetta
  Requirement analysis in medical phantom development : a survey tool approach with an illustrative example of a multimodal deformable pelvic phantom
  Frontiers in physics 12 (2024-08-22)
  Open Access | Verlags DOI
• Kilian, Leonie; Fehn, Patrick; Bischop, Floyd; Brouschkin, Alexander; Dege, Jan Hendrik; Krause, Dieter; Weigold, Matthias
  High-Precision Functional Surfaces on CFRP Components Investigation of Grinding Processes, Tribological Behavior, and the Service Life Based on the Example of Motor Spindle Components Made of Carbon Fiberreinforced Polymer (CFRP)
  ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb 119 (7/8): 553-557 (2024)
  Verlags DOI
• Hartwich, Tobias S.; Panek, Stefan; Wilckens, Dirk; Wille, Tobias; Krause, Dieter
  The influence of R/t-ratio on the imperfection sensitivity of the buckling load of thin-walled CFRP cylindrical shells
  Composite Structures 341: 118216 (2024)
  Open Access | Verlags DOI
• Beibl, Julia; Zumach, Katharina; Wehrend, Sven; Züfle, Marc; Hein, Eugen; Plaumann, Benedikt; Krause, Dieter
  Applying a product modularization approach on the case of a battery pack
  Proceedings of the Design Society 4: 493-502 (2024)
  Open Access | Verlags DOI
• Laukotka, Fabian N.; Berschik, Markus Christian; Krause, Dieter
  Enhancing design representations of information and knowledge of complex and long-living assets by applying system modelling techniques
  Proceedings of the Design Society 4: 403-412 (2024)
  Open Access | Verlags DOI
• Schellhorn, Johann Christoph; Schwan, Lukas; Krause, Dieter
  Optimization of the potting design using an approach for load path optimized designs of sandwich structures
  Proceedings of the Design Society 4: 3013-3022 (2024)
  Open Access | Verlags DOI
• Sobirey, Eve; Wegner, Marie; Laukotka, Fabian N.; Krause, Dieter
  Printing study and design guideline for small hollow structures in medical technology
  Proceedings of the Design Society 4: 1849-1858 (2024)
  Open Access | Verlags DOI
• Beibl, Julia; Krause, Dieter
  Product changes from various viewpoints along the product lifecycle – an empirical study
  Proceedings of the Design Society 4: 2503-2512 (2024)
  Open Access | Verlags DOI
• Berschik, Markus Christian; Laukotka, Fabian N.; Züfle, Marc; Krause, Dieter
  Supporting modular product family representations by methodically utilising meta-models
  Proceedings of the Design Society 4: 2513-2522 (2024)
  Open Access | Verlags DOI
• Sankowski, Olga; Krause, Dieter
  Towards a method for human-centred analysis of external variety
  Proceedings of the Design Society 4: 335-344 (2024)
  Open Access | Verlags DOI
• Vogt, Juliane; Wöller, Lea-Nadine; Krause, Dieter
  Effects of product personalization : considering personalizability in the product architecture of modular product families
  Journal of Mechanical Design 146 (4): 041402 (2024)
  Open Access | Verlags DOI
• Kruse, Felix; Küchenhof, Jan; Gomberg, Ilja; Breimann, Richard; Krause, Dieter; Kirchner, Eckhard; Trieu, Hoc Khiem
  Identification of parameter sets for the selection of microelectronic components for sensor-integrating machine elements
  IEEE Sensors Journal 24 (7): 11174-11183 (2024-04-01)
  Verlags DOI
• Kriegesmann, Benedikt; Reuter, Niklas; Panek, Stefan; Hartwich, Tobias S.; Krause, Dieter
  Streuung der Traglast von Kreiszylinderschalen unter kombinierter Belastung
  Berichte der Fachtagung Baustatik – Baupraxis 15 : 04. und 05. März 2024, Hamburg. - Hamburg, 2024. - Seite 645-652
  Open Access
• Inselmann, Pascal; Berschik, Markus Christian; Brahm, Michael; Krause, Dieter
  Approach for model-based test specifications in the context of space engineering
  Workshop on Model-Based Space Systems and Software Engineering (MBSE 2024)
  
• Laukotka, Fabian N.; Krause, Dieter
  Combining system modelling and graph databases to improve access and analysis in data-intensive engineering tasks
  18th Annual IEEE International Systems Conference, Proceedings (SysCon 2024)
  Verlags DOI
• Streckenbach, Anna; Schubert, Niklas; Streckenbach, Felix; Dust, Tobias; Ngo, Ngoc Tuan; Fiehler, Jens; Munz, Martin; Hueners, Ida; Schneider, Philipp; Frenzel, Thorsten; Gargioni, Elisabetta; Wegner, Marie; Chin, Shih Jan; Well, Lennart; Adam, Gerhard; Meyer, Mathias
  Current State and Outlook in Medical 3D Printing and the Role of Radiology
  RöFo Fortschritte auf dem Gebiet der Rontgenstrahlen und der Bildgebenden Verfahren (in Press): (2024)
  Verlags DOI
• Spallek, Johanna
  Design for Mass Adaptation: Methodische Unterstützung zur massenhaften Produktindividualisierung
  Springer Vieweg 978-3-662-69589-0: (2024)
  
• Christiansen, Finn Hendrik; Hartwich, Tobias S.; Schellhorn, Johann Christoph; Schwan, Lukas; Krause, Dieter
  Design optimization of aircraft cabin panels by additive manufacturing
  Proceedings of the Munich Symposium on Lightweight Design 2023: (2024)
  Verlags DOI
• Bock, Katrin; Dublasky, Stephan; Dürkop, Axel; Guglielmi, Paula O.; Panke, Jana; Schielein, Dorothee; Beck, Katharina; Frey, Mascha-Josephine; Hernacki, Katharina; Jäger, Ineke; Küchenhof, Jan; Lüssenhop, Phillipp; Olberg, Nina; Schaldach, Ruth; Wichmann, Stephanie
  HOOU an der TU Hamburg : Jahresbericht 2023
  Technische Universität Hamburg (2024)
  Open Access
• Sankowski, Olga; Heyden, Emil; Krause, Dieter
  Integrating variety, assembly, and lightweight design in product architecture of cabin monument
  Procedia CIRP 128: 25-30 (2024)
  Open Access | Verlags DOI
• Christiansen, Finn Hendrik; Laukotka, Fabian N.; Krause, Dieter
  Modellbasierte Dokumentation der Flugzeugkabine im Kontext des Rerofits
  73. Deutscher Luft- und Raumfahrtkongress (DLRK 2024)
  Open Access | Verlags DOI
• Beibl, Julia; Disselkamp, Jan Philipp; Dumitrescu, Roman; Krause, Dieter
  Product and production design - rethinking views on flexibility
  Procedia CIRP 128: 204-209 (2024)
  Open Access | Verlags DOI
• Wehrend, Sven; Krause, Dieter; Frischkorn, Konrad; Eickhoff, Thomas; Reißmann, Jan; May, Marvin Carl; Lanza, Gisela; Hasse, Alexander; Stark, Rainer; Göbel, Jens C.; Jacobs, Georg; Schleich, Benjamin
  Product production ecosystems for the reuse of modules in the extended product life cycle
  35th Symposium Design for X (DfX 2024)
  Verlags DOI
• Berschik, Markus Christian; Krause, Dieter
  Towards Model-Based Modular Product Families in the Context of Systems Engineering
  NordDesign (2024)
  Verlags DOI

2023

• Züfle, Marc; Rennpferdt, Christoph; Batora, Mona; Bursac, Nikola; Krause, Dieter
  Complexity Coping by Methodical Agile and Modular Product Development - A Bibliometric Review
  IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2023)
  Verlags DOI
• Sankowski, Olga; Krause, Dieter
  The Human-centredness metric : early assessment of the quality of human-centred design activities
  Applied Sciences 13 (21): 12090 (2023)
  Open Access | Verlags DOI
• Röver, Tim; Kuehne, Maxim; Bischop, Floyd; Clague, Leighton; Bossen, Bastian; Emmelmann, Claus
  Design and numerical assessment of an additively manufactured Schwarz diamond triply periodic minimal surface fluid-fluid heat exchanger
  Journal of Laser Applications 35 (4): 042071 (2023)
  Open Access | Verlags DOI
• Züfle, Marc; Berschik, Markus Christian; Birk, Clemens; Geiger, Daniel; Krause, Dieter
  Transparency by mapping of solution variety in modular mechatronic systems architecture
  Tag des Systems Engineering (TdSE 2023)
  
• Gomberg, Ilja; Breimann, Richard; Kirchner, Eckhard; Küchenhof, Jan; Krause, Dieter; Trieu, Hoc Khiem
  Evaluation of a modular microsystem structure for sensor-integrating machine elements
  Tagungsband MikroSystemTechnik Kongress 2023, Dresden, 23. - 25. Oktober 2023. - Berlin, 2023.
  
• Züfle, Marc; Küchenhof, Jan; Berschik, Markus Christian; Krause, Dieter
  Enhancing Collaborative Modular Product Development: Interface Allocation and Associated Responsibilities
  25th International Dependency and Structure Modelling Conference (DSM 2023)
  Verlags DOI
• Ridder, Maximilian; Rennpferdt, Christoph; Wöller, Lea-Nadine; Krause, Dieter
  Development of a dynamic complexity costs assessment approach in aviation development
  34th Symposium Design for X (DFX 2023)
  Verlags DOI
• Pähler, Lukas; Sankowski, Olga; Üreten, Selin; Eisenmann, Matthias; Krause, Dieter; Matthiesen, Sven
  Impact of method users on the application of design methods : assessing the role of method-related background knowledge
  34th Symposium Design for X (DFX 2023)
  Open Access | Verlags DOI
• Schmiech, Jonte; Wortmann, Nadine; De Sousa Guerreiro, Helena I.; Sobirey, Eve; Wegner, Marie; Kyselyova, Anna; Fiehler, Jens; Krause, Dieter
  Development of an additively manufactured skull model for the neurointerventional simulator HANNES
  Transactions on additive manufacturing meets medicine 5 (1): 816 (2023)
  Open Access | Verlags DOI
• Sobirey, Eve; Schmiech, Jonte; Wegner, Marie; Flottmann, Fabian; Fiehler, Jens; Krause, Dieter
  Influence of additive manufacturing parameters on patient-specific small vessel models based on the neurointerventional simulator HANNES
  Transactions on additive manufacturing meets medicine 5 (1): 810 (2023)
  Open Access | Verlags DOI
• Rennpferdt, Christoph; Züfle, Marc; Bagusat, Marco; Bender, Dennis; Krause, Dieter
  Development of Modular Architectures for Product–Service Systems
  Sustainability 15 (18): 14001 (2023)
  Open Access | Verlags DOI
• Luxbacher, Günther; Krause, Dieter
  From Engineering to Product Design. Solutions as Signs of the Times and the Corresponding Institutional Progress during 75 years of WiGeP
  34th Symposium Design for X (DFX 2023)
  Verlags DOI
• Hanna, Michael; Wöller, Lea-Nadine; Dambietz, Florian; Krause, Dieter
  A model-based approach for the methodical development and configuration of modular product families
  Systems 11 (9): 449 (2023-08-31)
  Open Access | Verlags DOI
• Ramdani, Nora; Kyselyova, Anna; Ngo, Ngoc Tuan; Schmiech, Jonte; Krause, Dieter; Flottmann, Fabian; Meyer, Lukas; Fiehler, Jens; Bester, Maxim; De Sousa Guerreiro, Helena I.
  P165/237  Development and Validation of a novel stenosis model for percutaneous transluminal angioplasty training
  15th Congress of the European Society of Minimally Invasive Neurological Therapy (ESMINT 2023)
  Verlags DOI
• Panek, Stefan; Hartwich, Tobias S.; Kriegesmann, Benedikt; Krause, Dieter
  Guidelines for test conditions and documentation of buckling experiments with cylindrical CFRP shells
  23rd International Conference on Composites Materials (ICCM 2023)
  
• Kuechenhof, Jan; Krause, Dieter
  Experimental validation of a method for systematic new development
  24th International Conference on Engineering Design (ICED 2023)
  Open Access | Verlags DOI
• Breimann, Richard; Rennpferdt, Christoph; Wehrend, Sven; Kirchner, Eckhard; Krause, Dieter
  Exploiting the sustainability potential of modular products by integrating R-imperatives into product life phases
  24th International Conference on Engineering Design (ICED 2023)
  Open Access | Verlags DOI
• Kuechenhof, Jan; Berschik, Markus C.; Beibl, Julia; Alonso Fernández, Iñigo; Otto, Kevin; Krause, Dieter; Isaksson, Ola
  Incorporating field effects into the design of modular product families
  24th International Conference on Engineering Design (ICED 2023)
  Open Access | Verlags DOI
• Berschik, Markus Christian; Schumacher, Thomas; Laukotka, Fabian N.; Krause, Dieter; Inkermann, David
  MBSE within the engineering design community - an exploratory study
  24th International Conference on Engineering Design (ICED 2023)
  Open Access | Verlags DOI
• Breslin, Thomas; Paino, Jason; Wegner, Marie; Engels, Elette; Fiedler, Stefan; Forrester, Helen; Rennau, Hannes; Bustillo, John Paul; Cameron, Matthew; Häusermann, Daniel; Hall, Christopher; Krause, Dieter; Hildebrandt, Guido; Lerch, Michael; Schültke, Elisabeth
  A novel anthropomorphic phantom composed of tissue-equivalent materials for use in experimental radiotherapy : design, dosimetry and biological pilot study
  Biomimetics 8 (2): 230 (2023)
  Open Access | Verlags DOI
• Wegner, Marie; Frenzel, Thorsten; Krause, Dieter; Gargioni, Elisabetta
  Development and characterization of modular mouse phantoms for end-to-end testing and training in radiobiology experiments
  Physics in Medicine and Biology 68 (8): 085009 (2023-04-05)
  Open Access | Verlags DOI
• Laukotka, Fabian N.; Krause, Dieter
  Supporting digital twins for the retrofit in aviation by a model-driven data handling
  Systems 11 (3): 142 (2023)
  Open Access | Verlags DOI
• Züfle, Marc; Berschik, Markus Christian; Rennpferdt, Christoph; Krause, Dieter
  Zielgerichtete Gestaltung modularer Maschinen-Architekturen: Ermöglichen digitaler Fabriken durch die Entwicklung digitalfähiger Systeme
  ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 118 (3): 144-148 (2023-03)
  Verlags DOI
• Krause, Dieter; Gebhardt, Nicolas
  Methodical development of modular product families: Developing high product diversity in a manageable way
  Berlin, Heidelberg, 1-261 Springer-Verlag GmbH Germany (2023-02-01)
  Verlags DOI
• Hartwich, Tobias S.; Panek, Stefan; Wilckens, Dirk; Bock, Matthias; Krause, Dieter
  The influence of the manufacturing process and test boundary conditions on the buckling load of thin-walled cylindrical CFRP shells
  Composite Structures 308: 116674 (2023-03-15)
  Open Access | Verlags DOI
• Mertens, Kai Gustav; Rennpferdt, Christoph; Greve, Erik; Krause, Dieter; Meyer, Matthias
  Reviewing the intellectual structure of product modularization: Toward a common view and future research agenda
  Journal of Product Innovation Management 40 (1): 86-119 (2023-01)
  Open Access | Verlags DOI
• Heyden, Emil; Hofmann, Urs; Meboldt, Mirko; Krause, Dieter
  A compact adjustable hydraulic damper with symmetric high load behavior enabled by selective laser melting
  Journal of Low Frequency Noise Vibration and Active Control 42 (4): 1699-1717 (2023)
  Open Access | Verlags DOI
• Breimann, Richard; Fett, Michel; Küchenhof, Jan; Gomberg, Ilja; Kirchner, Eckhard; Krause, Dieter; Trieu, Hoc Khiem
  A method for optimizing product architectures for the management of disturbance factors
  33rd CIRP Design Conference - Procedia CIRP 119: 1041-1046 (2023)
  Open Access | Verlags DOI
• Krause, Dieter; Heyden, Emil
  Anpassbare Impedanzelemente zur Schwingungsreduzierung von Flugzeugstrukturen : Nachweis und Anwendung auf Schwingungsprüfständen
  Konstruktion 75 (11-12): 59 (2023)
  Verlags DOI
• Wegner, Marie; Gargioni, Elisabetta; Krause, Dieter
  Classification of phantoms for medical imaging
  33rd CIRP Design Conference - Procedia CIRP 119: 1140-1145 (2023)
  Open Access | Verlags DOI
• Schwan, Lukas; Schellhorn, Johann Christoph; Krause, Dieter
  Component testing of sandwich structures with more realistic boundary conditions
  In: Brian Falzon, Conor McCarthy (Eds.): ICCM23: proceedings of the 2023 International Conference on Composite Materials (2023)
  
• Wagenmann, Steffen; Züfle, Marc; Weidinger, Felicia; Heinzelmann, Lisa; Rapp, Simon; Bursac, Nikola; Krause, Dieter; Albers, Albert
  Data-driven modelling of the functional level in model-based systems engineering : optimization of module scopes in modular development
  33rd CIRP Design Conference - Procedia CIRP 119: 1047-1052 (2023)
  Open Access | Verlags DOI
• Malone, Karen
  Experimental investigation of deep-sea oil spills in a high-pressure laboratory environmen
  Springer Vieweg 978-3-031-25544-1: (2023)
  Verlags DOI
• Hölttä-Otto, Katja; Björklund, Tua; Otto, Kevin; Klippert, Monika; Krause, Dieter; Eckert, Claudia; Nespoli, Oscar; Albers, Albert
  Facing extreme uncertainty–how the onset of the COVID-19 pandemic influenced product development
  International Journal of Design Creativity and Innovation 11 (2): 117 - 137 (2023)
  Open Access | Verlags DOI
• Beibl, Julia; Lee, Jongsuk; Krause, Dieter; Moon, Seung Ki
  Flexibility - grand challenge for product design and production : review and status
  33rd CIRP Design Conference - Procedia CIRP 119: 91-96 (2023)
  Open Access | Verlags DOI
• Greve, Erik
  Methode zur Gestaltung zukunftsrobuster modularer Produktstrukturen aus Markt- und Produktionssicht
  Technische Universität Hamburg (2023)
  Verlags DOI
• Zumach, Katharina; Berschik, Markus Christian; Hanna, Michael; Gebhardt, Nicolas; Krause, Dieter
  Modellierungskonzept für Lösungsalternativen in der frühen Phase der Produktentwicklung von Marineschiffen
  Tag des Systems Engineering 2023, Tagungsband Würzburg, 15.-17. November 2023. - Bremen, 2023. - Seite 251 - 257
  
• Züfle, Marc; Krause, Dieter
  Multi-disciplinary product design and modularization : concept introduction of the Module Harmonization Chart (MHC)
  33rd CIRP Design Conference - Procedia CIRP 119: 938–943 (2023)
  Open Access | Verlags DOI
• Laukotka, Fabian N.; Krause, Dieter
  Virtual representations of physical assets : a literature study about digital twins from the perspective of application in aviation's retrofit
  33rd CIRP Design Conference - Procedia CIRP 119: 926-931 (2023)
  Open Access | Verlags DOI

2022

• Schültke, Elisabeth; Fiedler, Stefan; Mewes, Catharina; Gargioni, Elisabetta; Klingenberg, Johannes; Abreu Faria, Guilherme; Lerch, Michael; Petasecca, Marco; Prehn, Franziska; Wegner, Marie; Scholz, Marten; Jaekel, Felix; Hildebrandt, Guido
  The Microbeam insert at the white beam beamline P61A at the synchrotron PETRA III/DESY : a new tool for high dose rate irradiation research
  Cancers 14 (20): 5137 (2022)
  Open Access | Verlags DOI
• Züfle, Marc; Küchenhof, Jan; Hanna, Michael; Krause, Dieter
  Assessing the influence of digital innovations on the organizational design of product family generations
  24th International Dependency and Structure Modeling Conference (DSM 2022)
  
• Guerreiro, Helena; Wortmann, Nadine; Andersek, Thomas; Ngo, Ngoc Tuan; Frölich, Andreas M.; Krause, Dieter; Fiehler, Jens; Kyselyova, Anna A.; Flottmann, Fabian
  Novel synthetic clot analogs for in-vitro stroke modelling
  PLoS ONE 17 (9): e0274211 (2022-09)
  Open Access | Verlags DOI
• Berschik, Markus Christian; Blecken, Marvin; Kumawat, Hiteshkumar; Rath, Jan-Erik; Krause, Dieter; God, Ralf; Schüppstuhl, Thorsten
  A holistic aircraft cabin metamodel as an approach towards an interconnected digitised cabin lifecycle
  33rd Congress of the International Council of the Aeronautical Sciences (ICAS 2022)
  Open Access
• Züfle, Marc; Rennpferdt, Christoph; Kuhl, Juliane; Schwede, Lea-Nadine; Krause, Dieter
  Analyzing Dependencies between Product Architecture and Module Drivers
  33rd Symposium Design for X (DFX 2022)
  Verlags DOI
• Schwenke, Johann; Schwan, Lukas; Hanna, Michael; Krause, Dieter
  Ansatz zur lastpfadoptimierten Gestaltung von Sandwichstrukturen mithilfe virtueller Tests und realitätsnahen Testaufbauten
  33rd Symposium Design for X (DFX 2022)
  Verlags DOI
• Hüttich, Philipp; Panek, Stefan; Krause, Dieter
  Combined environments - challenges and potentials in the realistic component testing
  33rd Symposium Design for X (DFX 2022)
  Verlags DOI
• Rennpferdt, Christoph; Bagusat, Marco; Bender, Dennis; Krause, Dieter
  Development of Business Model Families for Product-Service Systems
  33rd Symposium Design for X (DFX 2022)
  Verlags DOI
• Panek, Stefan; Hartwich, Tobias S.; Krause, Dieter
  Directional Effects of Load Deviations on the Buckling of Cylindrical Shells in Experiment and Design
  33rd Symposium Design for X (DFX 2022)
  Verlags DOI
• Schwan, Lukas; Hanna, Michael; Hartwich, Tobias S.; Heyden, Emil; Hüttich, Philipp; Sankowski, Olga; Schwenke, Johann; Wehrend, Sven; Krause, Dieter
  Neue Ansätze zur Entwicklung innovativer und nachhaltiger Bauweisen in der Flugzeugkabine
  71. Deutscher Luft- und Raumfahrtkongress, (DLRK 2022): (2022)
  Open Access | Verlags DOI
• Kuhl, Juliane; Krause, Dieter
  Identifying potentials of product personalization
  ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC-CIE 2022)
  Verlags DOI
• Züfle, Marc; Rennpferdt, Christoph; Krause, Dieter
  Increasing Transparency for Novel and Existing Complex Systems Development - Modular Design in an Agile Context
  How Product and Manufacturing Design Enable Sustainable Companies and Societies (NordDesign 2022)
  
• Schwede, Lea-Nadine; Greve, Erik; Krause, Dieter; Otto, Kevin N.; Moon, Seung Ki; Albers, Albert; Kirchner, Eckhard; Lachmayer, Roland; Bursac, Nikola; Inkermann, David; Rapp, Simon; Hausmann, Maximilian; Schneider, Jannik Alexander
  How to Use the Levers of Modularity Properly-Linking Modularization to Economic Targets
  Journal of Mechanical Design 144 (7): 071401 (2022-07)
  Verlags DOI
• Wegner, Marie; Hartwich, Tobias S.; Heyden, Emil; Schwan, Lukas; Schwenke, Johann; Wortmann, Nadine; Krause, Dieter
  New trends in aviation and medical technology enabled by additive manufacturing
  Frontiers in Manufacturing Technology 2 (): 919738 (2022)
  Open Access | Verlags DOI
• Hüttich, Philipp; Heyden, Emil; Krause, Dieter
  A numerical model for vibration analyses of an aircraft partition with parameterized interface properties
  20th European Conference on Composite Materials (ECCM 2022) 5: 702-709 (2022)
  Open Access
• Hartwich, Tobias S.; Schwenke, Johann; Schwan, Lukas; Krause, Dieter
  Classification and development of new component tests for aircraft cabin interior
  20th European Conference on Composite Materials (ECCM 2022) 5: 25-32 (2022)
  Open Access | Verlags DOI
• Schwan, Lukas; Schwenke, Johann; Hartwich, Tobias S.; Krause, Dieter
  Virtual testing of honeycomb sandwich structures with multiple load introduction points
  20th European Conference on Composite Materials (ECCM 2022) 5: 81-88 (2022)
  Open Access | Verlags DOI
• Kuhl, Juliane; Hauschild, Johann; Krause, Dieter
  Comparing friction of additively manufactured materials with animal blood vessels
  Annals of 3D Printed Medicine 7: 100061 (2022-08)
  Open Access | Verlags DOI
• Züfle, Marc; Muschik, Sabine; Bursac, Nikola; Krause, Dieter
  Coping asynchronous modular product design by modelling a systems-in-system
  Proceedings of the Design Society 2: 2553-2562 (2022-05)
  Open Access | Verlags DOI
• Rennpferdt, Christoph; Schneider, Jannik Alexander; Lachmayer, Roland; Krause, Dieter
  Designing PSS fleets - consideration of the product architecture
  Proceedings of the Design Society 2: 1109-1118 (2022-05)
  Open Access | Verlags DOI
• Laukotka, Fabian; Rennpferdt, Christoph; Krause, Dieter
  Digital twins and product-service systems: a synergy with challenges and opportunities
  Proceedings of the Design Society 2: 1639-1648 (2022-05)
  Open Access | Verlags DOI
• Hanna, Michael; Schwenke, Johann; Schwan, Lukas; Krause, Dieter
  Methodical approach for the model-based development of aircraft cabin product families under consideration of lightweight and cost-based design
  Proceedings of the Design Society 2: 435-444 (2022-05)
  Open Access | Verlags DOI
• Küchenhof, Jan; Berschik, Markus Christian; Heyden, Emil; Krause, Dieter
  Methodical support for the new development of cyber-physical product families
  Proceedings of the Design Society 2: 495-504 (2022-05)
  Open Access | Verlags DOI
• Schwan, Lukas; Hanna, Michael; Schwenke, Johann; Krause, Dieter
  Modeling of an interface between system models and FEM models for the support of model-based development in modular lightweight design for aircraft cabins
  Proceedings of the Design Society 2: 1965-1974 (2022-05)
  Open Access | Verlags DOI
• Schmidt, Rene; Kessler, Marc; Bohne, Sven; Trieu, Hoc Khiem; Kalaydzhyan, Karen
  Vaporiser unit for an inhaler, and method for controlling a vaporiser unit
  
• Moenck, Keno H. W.; Laukotka, Fabian; Deneke, Constantin; Schüppstuhl, Thorsten; Krause, Dieter; Nagel, Thorsten J.
  Towards an Intelligent Digital Cabin Twin to Support an Aircraft's Retrofit and Base Maintenance (SAE Paper 2022-01-0046)
  SAE International AeroTech (AEROTECH 2022)
  Verlags DOI
• Wortmann, Nadine; Andersek, Thomas; De Sousa Guerreiro, Helena I.; Kyselyova, Anna; Frölich, Andreas M. J.; Fiehler, Jens; Krause, Dieter
  Development of synthetic thrombus models to simulate stroke treatment in a physical neurointerventional training model
  All Life 15 (1): 283-301 (2022)
  Open Access | Verlags DOI
• Lindenmann, Andreas; Heyden, Emil; Mas, V.; Krause, Dieter; Matthiesen, Sven
  Influence of friction bearings on the frequency response of a variable stiffness mechanism
  Mechanism and Machine Theory 168: 104588 (2022-02)
  Verlags DOI
• Greve, Erik; Fuchs, Christoph; Hamraz, Bahram; Windheim, Marc; Rennpferdt, Christoph; Schwede, Lea-Nadine; Krause, Dieter
  Knowledge-based decision support for concept evaluation using the extended impact model of modular product families
  Applied Sciences 12 (2): 547 (2022)
  Open Access | Verlags DOI
• Design methodology for future products: data driven, agile and flexible
  Springer 978-3-030-78367-9: (2022)
  Verlags DOI
• Moenck, Keno; Laukotka, Fabian; Krause, Dieter; Schüppstuhl, Thorsten
  Digital twins of existing long-living assets : reverse instantiation of the mid-life twin
  33rd Symposium Design for X (DFX 2022)
  Verlags DOI
• Berschik, Markus Christian; Laukotka, Fabian; Hanna, Michael; Schwan, Lukas; Krause, Dieter
  Digitale Innovationen in der Flugzeugkabinenentwicklung
  71. Deutscher Luft- und Raumfahrtkongress (DLRK 2022)
  Verlags DOI
• Krause, Dieter; Schwede, Lea-Nadine; Dambietz, Florian; Hanna, Michael
  Model-Based Systems Engineering: Discovering Potentials for Methodical Modular Product Development
  in: Design Methodology for Future Products, Springer: 265-285 (2022)
  Verlags DOI
• Berschik, Markus Christian; Oidtmann, Nicolas; Laukotka, Fabian; Brahm, Michael; Krause, Dieter
  Model-based power budget analysis of satellites using SysML Rollup Pattern
  Tag des Systems Engineering (2022)
  
• Kirchner, Eckhard; Breimann, Richard; Küchenhof, Jan
  Sensorintegrierende Maschinenelemente – Klassifizierung, Beispiele und Herausforderungen
  in: Dresdner Maschinenelemente Kolloquium DMK, Herausgeber Berthold Schlecht, sierke VERLAG: 79-92 (2022)
  
• Hackl, Jennifer
  Wirkmodell der Eigenschaften modularer Produktstrukturen
  Springer Vieweg: 978-3-662-65262-6 (2021)
  Verlags DOI

2021

• Rennpferdt, Christoph; Dambietz, Florian Michael; Krause, Dieter
  Business Models and Product-Service System Design - Introducing the Business Model Graph
  IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2021)
  Verlags DOI
• Kuhl, Juliane; Üreten, Selin; Krause, Dieter
  Challenges of modular product families and product personalization - An interview study
  IEEE International Conference on Industrial Engineering and Engineering Management (2021)
  Verlags DOI
• Kuhl, Juliane; Rennpferdt, Christoph; Krause, Dieter
  Characteristic-Oriented Complexity Cost Analysis for Evaluating Individual Product Attributes
  Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV 2021); World Mass Customization and Personalization Conference (MCPC 2021)
  Verlags DOI
• Allinger, Kim; Kuhl, Matthias
  Closed-Loop CMOS Stresskartierungssystem mit 4-Bit einstellbarer Sensitivität basierend auf 32 FET Stresssensoren
  Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte für zukunftsfahige Markte - MikroSystemTechnik Congress (2021)
  
• Wortmann, Nadine; De Sousa Guerreiro, Helena I.; Kyselyova, Anna; Frölich, Andreas M. J.; Fiehler, Jens; Krause, Dieter
  Development and Manufacturing of Cervical Stenosis Models for the Integration Into a Neurointerventional Simulation Model
  International Mechanical Engineering Congress and Exposition (ASME 2021)
  Verlags DOI
• Hanna, Michael; Schwede, Lea-Nadine; Schwenke, Johann; Laukotka, Fabian; Krause, Dieter
  Methodical Modeling of Product and Process Data of Design Methods Using the Example of Modular Lightweight Design
  International Mechanical Engineering Congress and Exposition (ASME 2021)
  Verlags DOI
• Rennpferdt, Christoph; Kuhl, Juliane; Krause, Dieter
  Tools for the Variety-Oriented Product-Service System Design
  Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV 2021); World Mass Customization and Personalization Conference (MCPC 2021)
  Verlags DOI
• Heyden, Emil; Lindenmann, Andreas; Matthiesen, Sven; Krause, Dieter
  Approach for calibrated measurement of the frequency response for characterization of compliant interface elements on vibration test benches
  Applied Sciences 11 (20): 9604 (2021-10)
  Open Access | Verlags DOI
• Wegner, Marie; Gargioni, Elisabetta; Krause, Dieter
  Indirectly additive manufactured deformable bladder model for a pelvic radiotherapy phantom
  Transactions on Additive Manufacturing Meets Medicine 3 (1): 498 (2021)
  Open Access | Verlags DOI
• Berschik, Markus Christian; Laukotka, Fabian; Krause, Dieter
  Ansatz eines holistischen Datenstamms zur modellbasierten, domänenübergreifenden Nutzung in der Produktentstehung
  32nd Symposium Design for X (DFX 2021)
  Verlags DOI
• Russwurm, Eva; Faltus, Florian; Laukotka, Fabian; Schwan, Lukas; Brossog, Matthias; Krause, Dieter; Franke, Jörg
  Methodik zur frühzeitigen Integration prozessspezifischer Einflussfaktoren aus der automatisierten Montage in die Auslegung funktionskritischer Komponenten
  32nd Symposium Design for X (DFX 2021)
  Verlags DOI
• Schwan, Lukas; Hüttich, Philipp; Wegner, Marie; Krause, Dieter
  Procedure for the transferability of application-specific boundary conditions for the testing of components and products
  32nd Symposium Design for X (DFX 2021)
  Verlags DOI
• Dambietz, Florian; Rennpferdt, Christoph; Hanna, Michael; Krause, Dieter
  Using MBSE for the enhancement of consistency and continuity in modular product-service-system architectures
  Systems 9 (3): 63 (2021)
  Open Access | Verlags DOI
• Trauer, Jakob; Wöhr, Ferdinand; Eckert, Claudia; Kannengiesser, Udo; Knippenberg, Sjoerd; Sankowski, Olga; Zimmermann, Markus
  Criteria for selecting design process modelling approaches
  Proceedings of the Design Society 1: 791-800 (2021)
  Open Access | Verlags DOI
• Mertens, Kai Gustav; Rennpferdt, Christoph; Greve, Erik; Krause, Dieter; Meyer, Matthias
  Current trends and developments of product modularisation – a bibliometric analysis
  Proceedings of the Design Society 1: 801-810 (2021)
  Open Access | Verlags DOI
• Greve, Erik; Fuchs, Christoph; Hamraz, Bahram; Windheim, Marc; Krause, Dieter
  Design for future variety to enable long-term benefits of modular product families
  Proceedings of the Design Society 1: 993-1002 (2021)
  Open Access | Verlags DOI
• Birk, Clemens; Züfle, Marc; Albers, Albert; Bursac, Nikola; Krause, Dieter
  Interdisciplinary system architectures in agile modular development in the product generation development model using the example of a machine tool manufacturer
  Proceedings of the Design Society 1: 1897-1906 (2021)
  Open Access | Verlags DOI
• Rennpferdt, Christoph; Krause, Dieter
  Life phases modularisation of product-service systems
  Proceedings of the Design Society 1: 1967-1976 (2021)
  Open Access | Verlags DOI
• Dambietz, Florian; Greve, Erik; Krause, Dieter
  Simulation-based performance analysis for future robust modular product architectures
  Proceedings of the Design Society 1: 2671-2680 (2021)
  Open Access | Verlags DOI
• Sankowski, Olga; Küchenhof, Jan; Dambietz, Florian; Züfle, Marc; Wallisch, Anne; Krause, Dieter; Paetzold, Kristin
  Challenges in early phase of product family development processes
  Procedia CIRP 100: 840-845 (2021)
  Open Access | Verlags DOI
• Züfle, Marc; Rennpferdt, Christoph; Krause, Dieter
  Cross-departmental and cross-disciplinary product development - an industry survey on the necessity and future development of cross-departmental and cross-disciplinary perspectives
  Procedia CIRP 100: 625-630 (2021)
  Open Access | Verlags DOI
• Laukotka, Fabian; Hanna, Michael; Krause, Dieter
  Digital twins of product families in aviation based on an MBSE-assisted approach
  Procedia CIRP 100: 684-689 (2021)
  Open Access | Verlags DOI
• Hanna, Michael; Schwenke, Johann; Schwede, Lea-Nadine; Laukotka, Fabian; Krause, Dieter
  Model-based application of the methodical process for modular lightweight design of aircraft cabins
  Procedia CIRP 100: 637-642 (2021)
  Open Access | Verlags DOI
• Rennpferdt, Christoph; Greve, Erik; Krause, Dieter
  Variety-driven design to reduce complexity costs of a tire curing press family
  Procedia CIRP 100: 696-701 (2021)
  Open Access | Verlags DOI
• Dambietz, Florian; Hartwich, Tobias S.; Scholl-Corrêa, Julian; Hoffmann, Peter; Krause, Dieter
  Influence analysis of the layer orientation on mechanical and metallurgic characteristics of DED manufactured parts
  Lasers in Manufacturing Conference (LiM 2021)
  
• Kuhl, Juliane; Ding, Andreas; Ngo, Ngoc Tuan; Braschkat, Andrés; Fiehler, Jens; Krause, Dieter
  Design of personalized devices—the tradeoff between individual value and personalization workload
  Applied Sciences 11 (1): 241 (2021-01-01)
  Open Access | Verlags DOI
• Eisenmann, Matthias; Grauberger, Patric; Üreten, Selin; Krause, Dieter; Matthiesen, Sven
  Design method validation–an investigation of the current practice in design research
  Journal of Engineering Design 32 (11): 621-645 (2021)
  Verlags DOI
• Dambietz, Florian M.
  Performance simulation of modular product architectures by model-based configuration
  Springer 978-3-662-64232-0: (2021)
  Verlags DOI
• Krause, Dieter; Vietor, Thomas; Inkermann, David; Hanna, Michael; Richter, Timo; Wortmann, Jana Nadine
  Produktarchitektur
  in: Bender, B.; Gericke, K. (Hrsg.): Pahl/Beitz Konstruktionslehre, Springer Verlag (2021)
  Verlags DOI
• Krause, Dieter; Vietor, Thomas; Inkermann, David; Hanna, Michael; Richter, Timo; Wortmann, Jana Nadine
  Produktarchitektur
  in: Bender, B.; Gericke, K. (Hrsg.): Pahl/Beitz Konstruktionslehre, Springer Verlag (2021)
  Verlags DOI
• Beckmann, Gregor
  Unterstützung des Methodentransfers durch eine visuelle Methoden- und Prozessbeschreibung
  Springer Vieweg: 978-3-662-63706-7 (2021)
  

2020

• Papangelo, Antonio; Lovino, Roberto; Ciavarella, Michele
  Electroadhesive sphere-flat contact problem: A comparison between DMT and full iterative finite element solutions
  Tribology International (152): 106542 (2020-12)
  Verlags DOI
• Greve, Erik; Fuchs, Christoph; Hamraz, Bahram; Windheim, Marc; Schwede, Lea-Nadine; Krause, Dieter
  Investigating the Effects of Modular Product Structures to Support Design Decisions in Modularization Projects
  IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2020)
  Verlags DOI
• Heyden, Emil; Schwenke, Johann; Hartwich, Tobias S.; Hanna, Michael; Krause, Dieter
  Aktuelle Ansätze in der Entwicklung und Auslegung von Leichtbaustrukturen
  Produktentwicklung und Konstruktionstechnik 19: 135-157 (2020)
  Verlags DOI
• Schwede, Lea-Nadine; Greve, Erik; Rennpferdt, Christoph; Hanna, Michael; Krause, Dieter
  Auswirkungen modularer Produktstrukturen bei der Bewertung von Produktstrukturkonzepten
  Produktentwicklung und Konstruktionstechnik 19: 91-109 (2020)
  Verlags DOI
• Üreten, Selin; Sankowski, Olga; Krause, Dieter
  Aktuelle Ansätze in der Methodenforschung
  Produktentwicklung und Konstruktionstechnik 19: 31-64 (2020)
  Verlags DOI
• Spallek, Johanna; Wortmann, Jana Nadine; Kuhl, Juliane; Wegner, Marie; Krause, Dieter
  Entwicklung und Anwendung medizinischer Simulationsmodelle
  Produktentwicklung und Konstruktionstechnik 19: 255-272 (2020)
  Verlags DOI
• Laukotka, Fabian; Hartwich, Tobias S.; Hauschild, Johann; Heyden, Emil; Schmidt, Jens; Schwenke, Johann; Wegner, Marie; Wortmann, Jana Nadine; Krause, Dieter
  Entwicklung und Anwendung von Sonderprüfständen
  Produktentwicklung und Konstruktionstechnik 19: 177-205 (2020)
  Verlags DOI
• Seiler, Florian; Hanna, Michael; Schwede, Lea-Nadine; Laukotka, Fabian; Krause, Dieter
  MBSE zur Unterstützung der Produktentwicklung von modularen Produktarchitekturen
  Produktentwicklung und Konstruktionstechnik 19: 111-134 (2020)
  Verlags DOI
• Rennpferdt, Christoph; Greve, Erik; Kuhl, Juliane; Küchenhof, Jan; Dambietz, Florian; Krause, Dieter
  Modularisierung in der industriellen Anwendung
  Produktentwicklung und Konstruktionstechnik 19: 229-254 (2020)
  Verlags DOI
• Hanna, Michael; Schwenke, Johann; Heyden, Emil; Laukotka, Fabian; Krause, Dieter
  Neue Trends in der Flugzeugkabinenentwicklung
  Produktentwicklung und Konstruktionstechnik 19: 207-228 (2020)
  Verlags DOI
• Greve, Erik; Spallek, Johanna; Kuhl, Juliane; Küchenhof, Jan; Rennpferdt, Christoph; Krause, Dieter
  Neue Trends in der methodischen Entwicklung modularer Produktfamilien
  Produktentwicklung und Konstruktionstechnik.19: 65-89 (2020)
  Verlags DOI
• Rennpferdt, Christoph; Hartwich, Tobias S.; Krause, Dieter
  PKT – Kontinuierliche Weiterentwicklung in Forschung und Lehre
  Produktentwicklung und Konstruktionstechnik 19: 1-30 (2020)
  Verlags DOI
• Hartwich, Tobias S.; Hauschild, Johann; Krause, Dieter
  Transfer von Hochleistungswerkstoffen in die Produktentwicklung
  Produktentwicklung und Konstruktionstechnik 19: 159-175 (2020)
  Verlags DOI
• Seiler, Florian; Kuhl, Juliane; Krause, Dieter
  A simulation-based decision support method for modular product architecture alternatives
  International Dependency and Structure Modeling Conference, DSM: 83-92 (2020-10)
  
• Küchenhof, Jan; Seiler, Florian; Krause, Dieter
  Model Based Early-Stage Assessment for Modular New Product Development
  International DSM Conference (DSM 2020)
  Verlags DOI
• Hartwich, Tobias Simeon; Völkl, Harald; Wartzack, Sandro; Krause, Dieter
  Designing lightweight structures under consideration of material and structure uncertainties on different levels of the building block approach
  Proceedings of the 31st Symposium Design for X, DFX 2020): 121-130 (2020)
  Verlags DOI
• Wegner, Marie; Krause, Dieter; Gargioni, Elisabetta; Spallek, Johanna
  Comparing Technologies of Additive Manufacturing for the Development of Modular Dosimetry Phantoms in Radiation Therapy
  Transactions on Additive Manufacturing Meets Medicine (AMMM 2020)
  
• Küchenhof, Jan; Tabel, Caspar; Krause, Dieter
  Assessing the influence of generational variety on product family structures
  Procedia CIRP (91): 796-801 (2020)
  Open Access | Verlags DOI
• Heyden, Emil; Küchenhof, Jan; Greve, Erik; Krause, Dieter
  Development of a design education platform for an interdisciplinary teaching concept
  Procedia CIRP (91): 553-558 (2020)
  Open Access | Verlags DOI
• Greve, Erik; Rennpferdt, Christoph; Krause, Dieter
  Harmonizing cross-departmental perspectives on modular product families
  Procedia CIRP (91): 452-457 (2020)
  Open Access | Verlags DOI
• Küchenhof, Jan; Schwede, Lea-Nadine; Krause, Dieter
  Planning & tracking the changes-matrix mapping of modular product family generations
  13th Biennial NordDesign Conference, NordDesign 2020: (2020-08)
  Verlags DOI
• Oltmann, Jan; Hartwich, Tobias; Krause, Dieter
  Optimizing lightweight structures with particle damping using frequency based substructuring
  Design Science (6): e17 (2020)
  Open Access | Verlags DOI
• Seiler, Florian; Krause, Dieter
  A Multi-Dimensional Configuration Algorithm for Modular Product Architectures
  Design Society: DESIGN Conference (1): 2405-2414 (2020)
  Open Access | Verlags DOI
• Üreten, Selin; Eisenmann, Matthias; Nelius, Thomas; Garrelts, E.; Krause, Dieter; Matthiesen, Sven
  Current challenges and solution approaches in empirical engineering design research – a workshop for empirical research
  Design Society: DESIGN Conference (1): 61-70 (2020)
  Open Access | Verlags DOI
• Hanna, Michael; Schwenke, Johann; Krause, Dieter
  Inconsistency Management for Product Families with many Varients through a Model-Based Approach in Modular Lightweight Design
  Design Society: DESIGN Conference (2020)
  Open Access | Verlags DOI
• Kuhl, Juliane; Sankowski, Olga; Krause, Dieter
  Investigation on methods and characteristics in medical device development
  Proceedings of the Design Society, DESIGN Conference ; (1), 1969-1978 (2020)
  Open Access | Verlags DOI
• Rennpferdt, Christoph; Krause, Dieter
  Towards a framework for the design of variety-oriented product-service systems
  Design Society: DESIGN Conference (1): 1345-1354 (2020)
  Open Access | Verlags DOI
• Schwede, Lea-Nadine; Greve, Erik; Krause, Dieter
  Validation Concept for the Investigation of Effects of Modular Product Families
  Design Society: DESIGN Conference (1): 2395-2404 (2020)
  Open Access | Verlags DOI
• Schwenke, Johann; Krause, Dieter
  Optimization of load introduction points in sandwich structures with additively manufactured cores
  Design Science (6): 1-20 (2020)
  Open Access | Verlags DOI
• Hackl, Jennifer; Krause, Dieter; Otto, Kevin N.; Windheim, Marc; Moon, Seung Ki; Bursac, Nikola; Lachmayer, Roland
  Impact of Modularity Decisions on a Firm's Economic Objectives
  Journal of Mechanical Design 142 (4): 041403 (2020-04-01)
  Verlags DOI
• Nawka, Marie Teresa; Spallek, Johanna; Kuhl, Juliane; Krause, Dieter; Buhk, Jan-Hendrik; Fiehler, Jens; Frölich, Andreas M. J.
  Evaluation of a modular in vitro neurovascular procedure simulation for intracranial aneurysm embolization
  Journal of NeuroInterventional Surgery 2 (12): 214-219 (2020-02-01)
  Verlags DOI
• Laukotka, Fabian; Krause, Dieter
  Following the flow - An approach to analyze the rise of particles throughout the water column
  Gulf of Mexico Oil Spill and Ecosystem Science Conference (GoMOSES 2020)
  
• Seemann, Ralf
  A virtual testing approach for honeycomb sandwich panel joints in aircraft interior
  Berlin : Springer Vieweg (2020)
  
• Kuhl, Juliane; Mendoza Ponce, Pablo Daniel; Krautschneider, Wolfgang; Krause, Dieter
  Additively manufactured anatomical heart model for performance evaluation of aortic valve implants
  Transactions on Additive Manufacturing Meets Medicine 2 (1): 2009027 (2020)
  Open Access | Verlags DOI
• Wortmann, Jana Nadine; Frölich, Andreas M. J.; Kyselyova, Anna; De Sousa Guerreiro, Helena I.; Fiehler, Jens; Krause, Dieter
  Aortic Model in a Neurointerventional Training Model – Modular Design and Additive Manufacturing
  International Conference on Additive Manufacturing in Products and Applications (AMPA 2020)
  Verlags DOI
• Pesch, Simeon Jacob; Schlüter, Michael; Aman, Zachary M.; Malone, Karen; Krause, Dieter; Paris, Claire B.
  Behavior of Rising Droplets and Bubbles: Impact on the Physics of Deep-Sea Blowouts and Oil Fate
  Deep Oil Spills. Springer, Cham. (2020)
  Verlags DOI
• Windheim, Marc
  Cooperative decision-making in modular product family design
  Springer Vieweg 978-3-662-60714-5: (2020)
  
• Schwede, Lea-Nadine; Winter, Michael; Lödding, Hermann; Krause, Dieter
  Darstellung des Zusammenhangs von Produktarchitektur- und Produktionssystemgestaltung in SysML
  Symposium Design for X, DFX: 41-50 (2020)
  Verlags DOI
• Malone, Karen; Aman, Zachary M.; Pesch, Simeon Jacob; Schlüter, Michael; Krause, Dieter
  Jet Formation at the Spill Site and Resulting Droplet Size Distributions
  In: Deep Oil Spills - Facts, Fate, and Effects: 43-64 (2019)
  Verlags DOI
• Wallisch, Anne; Sankowski, Olga; Krause, Dieter; Paetzold, Kristin
  Kaleidoscope of User Involvement : Product Development Methods in an Interdisciplinary Context
  Advances in Intelligent Systems and Computing (1026): 8-14 (2020)
  Verlags DOI
• Laukotka, Fabian; Hanna, Michael; Schwede, Lea-Nadine; Krause, Dieter
  Lebensphasenübergreifende Nutzung Digitaler Zwillinge
  Zeitschrift für wirtschaftlichen Fabrikbetrieb (115): 101-104 (2020-04)
  Verlags DOI
• Laukotka, Fabian; Seiler, Florian; Krause, Dieter
  MBSE als Datenbasis zur Unterstützung von Konfiguratoren und Digitalen Zwillingen modularer Produktfamilien
  Proceedings of the 31st Symposium Design for X, DFX 2020 : 61-70 (2020)
  Verlags DOI
• Gebhardt, Nicolas
  Methodische Entwicklung von Visualisierungen als Arbeitswerkzeuge in der Produktentwicklung
  Springer Vieweg 978-3-662-61621-5: (2020)
  
• Küchenhof, Jan; Niebuhr, Gunnar; Schmidt, Rene; Kessler, Marc; Krause, Dieter
  Modular New Product Development in Highly Dynamic Markets
  CORESTA Congress Integrated Science: Opportunities and Challenges (2020)
  
• Schwenke, Johann; Hartwich, Tobias S.; Krause, Dieter
  Optimierung von Inserts in Sandwichstrukturen durch additive Fertigung
  Konstruktion für die Additive Fertigung 2018. Springer Vieweg, Berlin, Heidelberg (2020)
  Verlags DOI
• Produktentwicklung und Konstruktionstechnik: Forschungsergebnisse und -projekte der Jahre 2016 bis 2020
  Produktentwicklung und Konstruktionstechnik. Produktentwicklung und Konstruktionstechnik, vol 19. Springer Vieweg (2020)
  Verlags DOI
• Kuhl, Juliane; Ngo, Ngoc Tuan; Buhk, Jan-Hendrik; Ding, Andreas; Braschkat, Andrés; Fiehler, Jens; Krause, Dieter
  Qualification of additively manufactured blood vessel models for the evaluation of braided stent designs
  International Conference on Additive Manufacturing in Products and Applications (AMPA 2020)
  Verlags DOI
• Üreten, Selin; Spallek, Johanna; Üreten, Ece; Krause, Dieter
  Validation of the Design for Mass Adaptation Method – A Case for Higher Medical Treatment Quality
  International Symposium on Human Factors and Ergonomics in Health Care 1 (9): 88-100 (2020)
  Verlags DOI

2019

• Kuhl, Juliane; Krause, Dieter
  Design for Personalized Medical Devices - Benefit for the Patient as well as Advantage for the Company
  International Meeting on Healthcare Systems Design Research, Cambridge, UK (2019-12-02)
  
• Greve, Erik; Rennpferdt, Christoph; Hartwich, Tobias Simeon; Krause, Dieter
  Determination of future robust product features for modular product family design
  ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (14): (2019-11)
  Verlags DOI
• Krause, Dieter
  Development of the Hamburg Anatomical Neurointerventional Simulator - Replacement of Animal Experiments
  Bf3R Forschungsförderung - Deutsches Zentrum zum Schutz von Versuchstieren am BfR", Berlin (2019-09-20).
  
• Greve, Erik; Krause, Dieter
  Long-term effects of modular product architectures: An empirical follow-up study
  Procedia CIRP (84): 731-736 (2019)
  Open Access | Verlags DOI
• Kuhl, Juliane; Krause, Dieter
  Strategies for customer satisfaction and customer requirement fulfillment within the trend of individualization
  Procedia CIRP (84): 130-135 (2019)
  Open Access | Verlags DOI
• Rennpferdt, Christoph; Greve, Erik; Krause, Dieter
  The impact of modular product architectures in PSS design: a systematic literature review
  Procedia CIRP (84): 290-295 (2019)
  Open Access | Verlags DOI
• Üreten, Selin; Eisenmann, Matthias; Nelius, Thomas; Cao, Shi; Matthiesen, Sven; Krause, Dieter
  A Concept Map for Design Method Experiments in Product Development - A Guideline for Method Developers
  30. DfX-Symposium, Hamburg: 147-158 (2019-02)
  Verlags DOI
• Laukotka, Fabian; Oltmann, Jan; Krause, Dieter
  A digitized approach to reduce assembly conflicts during aircraft cabin conversions
  30. DfX-Symposium, Hamburg: 251-262 (2019-02)
  Verlags DOI
• Schwede, Lea-Nadine; Seiler, Florian; Krause, Dieter
  Anknüpfung von Modularisierungsmethoden an ein Wirkmodell modularer Produktstrukturen
  30. DfX-Symposium, Hamburg: 159-170 (2019-02)
  Verlags DOI
• Hanna, Michael; Schwenke, Johann; Krause, Dieter
  Chancen und Herausforderungen im digitalisierten Entwicklungsprozess
  30. DfX-Symposium, Hamburg: 73-84 (2019-02)
  Verlags DOI
• Wortmann, Jana Nadine; Spallek, Johanna; Kyselyova, Anna; Frölich, Andreas M. J.; Fiehler, Jens; Krause, Dieter
  Concept of an in-vitro model for endovascular stroke treatment using additive manufacturing
  Additive Manufacturing Meets Medicine (AMMM) 1: (2019-09)
  
• Inkermann, David; Hanna, Michael; Richter, Timo; Wortmann, Jana Nadine; Vietor, Thomas; Krause, Dieter
  Die Produktarchitektur als zentrales Konzept in der Produktentwicklung
  30. DfX-Symposium, Hamburg: 263-278 (2019-02)
  Verlags DOI
• Küchenhof, Jan; Krause, Dieter
  Entwicklung eines Produktarchitekturmodells zur Ableitung modularer Produktstrukturen
  30. DfX-Symposium, Hamburg: 25-36 (2019-02)
  Verlags DOI
• Hanna, Michael; Schwenke, Johann; Krause, Dieter
  Modularer Leichtbau – Chancen und herausforderungen im digitalisierten entwicklungsprozess
  Symposium Design for X, DFX: 73-84 (2019-09)
  Verlags DOI
• Heyden, Emil; Hartwich, Tobias Simeon; Schwenke, Johann; Krause, Dieter
  Transferability of Boundary Conditions in Testing and Validation of Lightweight Structures
  30. DfX-Symposium, Hamburg: 85-96 (2019-02)
  Verlags DOI
• Hartwich, Tobias Simeon; Völkl, Harald; Franz, Michael; Witzgall, Christian; Krause, Dieter; Wartzack, Sandro
  Zur Notwendigkeit eines konstruktionsmethodischen Ansatzes für die zeitfeste Auslegung endlosfaserverstärkter Kunststoffbauteile
  Symposium Design for X, DFX: 109-122 (2019-09)
  Verlags DOI
• Hartwich, Tobias Simeon; Krause, Dieter
  The Influence of Geometric Imperfections of Different Tolerance Levels on the BucklingLoad of Unstiffened CFRP Cylindircal Shells
  Proceedings of the 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia (2019-08)
  
• Schwede, Lea-Nadine; Hanna, Michael; Wortmann, Jana Nadine; Krause, Dieter
  Consistent Modelling of the Impact Model of Modular Product Structures with Linking Boundary Conditions in SysML
  Proceedings of the Design Society: International Conference on Engineering Design 1 (1): 3601-3610 (2019)
  Open Access | Verlags DOI
• Spallek, Johanna; Kuhl, Juliane; Wortmann, Jana Nadine; Buhk, Jan-Hendrik; Frölich, Andreas M. J.; Nawka, Marie Teresa; Kyselyova, Anna; Fiehler, Jens; Krause, Dieter
  Design for Mass Adaptation of the Neurointerventional Training Model HANNES with Patient-Specific Aneurysm Models
  Proceedings of the Design Society: International Conference on Engineering Design 1 (1): 897-906 (2019)
  Open Access | Verlags DOI
• Seiler, Florian; Greve, Erik; Krause, Dieter
  Development of a Configure-to-Order-Based Process for the Implementation of Modular Product Architectures: A Case Study
  Proceedings of the Design Society: International Conference on Engineering Design 1 (1): 2971-2980 (2019)
  Open Access | Verlags DOI
• Wortmann, Jana Nadine; Jürgenhake, Christoph; Seidenberg, Tobias; Dumitrescu, Roman; Krause, Dieter
  Methodical Approach for Process Selection in Additive Manufacturing
  Proceedings of the Design Society: International Conference on Engineering Design 1 (1): 779-788 (2019)
  Open Access | Verlags DOI
• Sankowski, Olga; Otto, Kevin N.; Moon, Seung Ki; Krause, Dieter
  PhD research learning in product architecture design
  Proceedings of the Design Society: International Conference on Engineering Design 1 (1): 549-558 (2019)
  Open Access | Verlags DOI
• Seiler, Florian; Schwede, Lea-Nadine; Krause, Dieter
  MBSE-basierte Produktkonfiguratoren zur Analyse der Modularisierung bei der Entwicklung modularer Baukastensysteme
  Entwerfen Entwickeln Erleben in Produktenwicklung und Design: (2019-06)
  
• Wallisch, Anne; Sankowski, Olga; Krause, Dieter; Paetzold, Kristin
  Overcoming fuzzy design practice: Revealing potentials of user-centered design research and methodological concepts related to user involvement
  International Conference on Engineering, Technology and Innovation, ICE/ITMC: 8792591 (2019-06)
  Verlags DOI
• Lindenmann, Andreas; Heyden, Emil; Matthiesen, Sven; Krause, Dieter
  Adjustable Impedance Elements for Testing and Validation of Aircraft Components and Hand-Held Power Tools
  Stuttgarter Symposium 2019-May: 63-72 (2019)
  
• Ciavarella, Michele; Papangelo, Antonio
  Extensions and comparisons of BAM (Bearing Area Model) for stickiness of hard multiscale randomly rough surfaces
  Tribology International (133): 263-270 (2019-05-01)
  Verlags DOI
• Sankowski, Olga
  Design Methodology - The blurred lines of user involvement
  Conference on Human Bahaviour in Design (HBiD), Tutzing: (2019-04-23)
  
• Krause, Dieter; Greve, Erik
  Variantenmanagement beherrschen durch Modularisierung - ein (Dauer-)Thema für den Mittelstand
  Technik Forum Industriearmaturen, VDMA Frankfurt: (2019-03-26)
  
• Nawka, Marie Teresa; Fiehler, Jens; Spallek, Johanna; Buhk, Jan-Hendrik; Frölich, Andreas M. J.
  Current status of training environments in neuro-interventional practice: Are animal models still contemporary?
  Journal of NeuroInterventional Surgery 11 (3): 283-289 (2019-03)
  Verlags DOI
• Fontanela, Filipe; Grolet, Aurélien; Salles, Loic; Chabchoub, Amin; Champneys, Alan; Patsias, Sophoclis; Hoffmann, Norbert
  Dissipative solitons in forced cyclic and symmetric structures
  Mechanical Systems and Signal Processing (117): 280-292 (2018-04-04)
  Verlags DOI
• Papangelo, Antonio; Guarino, R.; Pugno, Nicola M.; Ciavarella, Michele
  On unified crack propagation laws
  Engineering Fracture Mechanics (207): 269-276 (2019-02-15)
  Verlags DOI
• Schlüter, Matthias; Aman, Z. M.; Paris, C. B.; Oldenburg, Thomas B. P.; Pesch, Simeon Jacob; Malone, Karen; Krause, Dieter; Jaggi, Aprami; Jaeger, Philip
  The Pressure is On: Understanding Deep Oil Spills in the Ultra-Deep Environment
  Gulf of Mexico Oil Spill & Ecosystems Science Conference, New Orleans, LA, USA (2019-02)
  
• Hartwich, Tobias S.; Krause, Dieter
  The influence of geometric imperfections of different tolerance levels on the buckling load of unstiffened cfrp cylindrical shells
  International Conference on Composite Materials (ICCM 2019)
  
• Krause, Dieter; Sankowski, Olga; Wartzack, Sandro; Paetzold, Kristin
  30 Jahre Symposium Design for X
  WiGeP News 2: (2019)
  
• Rennpferdt, Christoph; Krause, Dieter
  Adapted Design for Variety: Consideration of the Software-Domain
  IEEE International Conference on Industrial Engineering and Engineering Management, IEEM: 950-954 (2019)
  Verlags DOI
• Greve, Erik
  Ein Methodenbaukasten zur Reduzierung der Varianz
  VDMA Variantenmanagement (2019)
  
• Krause, Dieter; Greve, Erik
  Entwicklung plattformbasierter Robotervarianten mit Siemens NX und Teamcenter
  WiGeP News 2: (2019)
  
• Küchenhof, Jan; Schwede, Lea-Nadine; Hanna, Michael; Krause, Dieter
  From Visualizations to Matrices – Methodical support for New Development of Modular Product Families
  International DSM Conference, DSM 2019, Monterey, USA (2019)
  Verlags DOI
• Laukotka, Fabian; Krause, Dieter
  How the deep-sea environment effects oil spills
  Symposium on Deep-Sea Oil Spills (2019)
  
• Ripperda, Sebastian
  Methodische Unterstützung zur kostenbasierten Auswahl modularer Produktstrukturen
  Produktentwicklung und Konstruktionstechnik (15): 2019
  
• Tricarico, Michele; Papangelo, Antonio; Constantinescu, Andrei; Ciavarella, Michele
  On adhesive theories in multilayered interfaces, with particular regard to "surface force apparatus" geometry
  Facta Universitatis, Series: Mechanical Engineering 1 (17): 95-102 (2019)
  Open Access | Verlags DOI
• Wassermann, Sven; Köllisch, Nikolai; Abdel-Maksoud Gomaa, Moustafa
  Roll damping of a twin-screw vessel: Comparison of RANSE-CFD with established methods
  Fluid Mechanics and its Applications (119): 191-209 (2019)
  Verlags DOI
• Albers, Albert; Rapp, Simon; Krause, Dieter; Sankowski, Olga
  Zukunftsrobuste Produktgenerationen
  WiGeP News (2019)
  

2018

• Belhocine, Ali; Abdullah, Oday Ibraheem
  Similarity and numerical solutions for the Lévêque problem of boundary layer heat and mass transfer in Hagen-Poiseuille flow
  International Journal of Heat and Technology 4 (36): 1404-1413 (2018)
  Verlags DOI
• Seemann, Ralf; Krause, Dieter
  Numerical modelling of partially potted inserts in honeycomb sandwich panels under pull-out loading
  Composite Structures (203): 101-109 (2018-11-01)
  Verlags DOI
• Eichmann, Oliver Constantin; Melzer, Sylvia; Hanna, Michael; God, Ralf; Krause, Dieter
  A Model-Based Approach for the Development of Modular Product Families Considering Different Life Phases
  TdSE, EMEASEC, Berlin 2018
  
• Hanna, Michael; Schwede, Lea Nadine; Krause, Dieter
  Model-based consistency for design for variety and modularization
  20th International Dependency and Structure Modeling Conference (DSM 2018): 239-248 (2018)
  
• Malone, Karen; Pesch, Simeon Jacob; Schlüter, Michael; Krause, Dieter
  Oil Droplet Size Distributions in Deep-Sea Blowouts: Influence of Pressure and Dissolved Gases
  Environmental Science and Technology 11 (52): 6326-6333 (2018-06-05)
  Verlags DOI
• Greve, Erik; Krause, Dieter
  An assessment of methods to support the design of future robust modular product architectures
  Proceedings of International Design Conference, DESIGN 1: 335-346 (2018)
  Verlags DOI
• Windheim, Marc; Gebhardt, Nicolas; Krause, Dieter
  Towards a decision-making framework for multi-criteria product modularization in cooperative environments
  Procedia CIRP (70): 380-385 (2018)
  Open Access | Verlags DOI
• Pesch, Simeon Jacob; Jaeger, Philip; Jaggi, Aprami; Malone, Karen; Hoffmann, Marko; Krause, Dieter; Oldenburg, Thomas B. P.; Schlüter, Michael
  Rise velocity of live-oil droplets in deep-sea oil spills
  Environmental Engineering Science 4 (35): 289-299 (2018-04)
  Verlags DOI
• Oltmann, Jan; Hartwich, Tobias Simeon; Krause, Dieter
  Design of particle dampers for lightweight structures using frequency based substructuring
  International Conference on Noise and Vibration Engineering and USD : 4049-4062 (2018)
  
• Sankowski, Olga; Krause, Dieter
  Using multi-channel human-system interaction for user-centered product design
  ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (13): (2018)
  Verlags DOI

2017

• Elstner, Steffen
  Eine Methode zur Bewertung von Anlaufrisiken in der Produktentwicklung für die Flugzeugindustrie
  Open Access
• Schwenke, Johann; Oltmann, Jan; Krause, Dieter
  Optimierung der Verbindungsstellen von Sand-wichstrukturen mit additiv gefertigtem Kern
  DFX 2017: Proceedings of the 28th Symposium Design for X: 191-202 (2017-10)
  
• Hauschild, Johann; Krause, Dieter
  Untersuchung des trockenen Reibungs- und Verschleißverhaltens von Keramikwerkstoffen an einem Linearprüfstand für Kolben-Zylinder-Laufpaarungen
  DFX 2017: 28th Symposium Design for X: 137-151 (2017-10)
  
• Hanna, Michael; Krause, Dieter
  Model-based support for product family design
  Understand, Innovate, and Manage your Complex System! - 19th International DSM Conference: 127-136 (2017-09)
  
• Üreten, Selin; Beckmann, Gregor; Krause, Dieter
  Planting the seeds of future mechanical design engineers - Learning skills
  Proceedings of the 19th International Conference on Engineering and Product Design Education: Building Community: Design Education for a Sustainable Future, E and PDE 2017: 698-703 (2017)
  
• Hanna, Michael; Ripperda, Sebastian; Krause, Dieter
  Cost based design of modular product families using the example of test rigs
  International Conference on Engineering Design, ICED DS87-3 (3): 241-250 (2017-08)
  
• Üreten, Selin; Krause, Dieter
  Discursive vs. intuitive - An experimental study to facilitate the use of design catalogues
  Proceedings of the International Conference on Engineering Design, ICED 9 (DS 87-9): 99-108 (2017)
  
• Hackl, Jennifer; Krause, Dieter
  Towards an impact model of modular product structures
  International Conference on Engineering Design, ICED DS87-3 (3): 151-160 (2017-08)
  
• Üreten, Selin; Beckmann, Gregor; Schwenke, Eilika; Krause, Dieter; Cao, Shi
  Continuing education and personalization of design methods to improve their acceptance in practice : an explorative study
  Procedia CIRP : 60 524-529 (2017)
  Open Access | Verlags DOI
• Schillo, Conny
  Reliability based design of unstiffened fibre reinforced composite cylinders
  TUTECH Verlag, ISBN 978-3-946094-14-2, 2017
  Open Access
• Ripperda, Sebastian; Krause, Dieter
  Cost effects of modular product family structures: Methods and quantification of impacts to support decision making
  Journal of Mechanical Design (139): art.no. 021103 (2017)
  Verlags DOI
• Windheim, Marc; Greve, Erik; Krause, Dieter
  Decisive economies and opportunity cost of modular product structure alternatives: An empirical case study
  IEEE International Conference on Industrial Engineering and Engineering Management (2017)
  Verlags DOI
• Seemann, Ralf; Krause, Dieter
  Numerical modelling of Nomex honeycomb sandwich cores at meso-scale level
  Composite Structures (159): 702-718 (2017)
  Verlags DOI
• Riedel, Uta; Simon, Siska; Sankowski, Olga; Gleßmer, Mirjam Sophia; Krause, Dieter
  Open assignments in a first year student project
  SEFI Annual Conference 2017 - Education Excellence for Sustainability, SEFI 2017: 1077-1084 (2017)
  
• Schillo, Conny; Kriegesmann, Benedikt; Krause, Dieter
  Reliability based calibration of safety factors for unstiffened cylindrical composite shells
  Composite Structures (168): 798-812 (2017)
  Verlags DOI
• Albers, Albert; Bursac, Nikola; Marthaler, Florian; Matthiesen, Sven; Reib, Nicolas; Siebe, Andreas; Bender, Beate; Binz, Hansgeorg; Krause, Dieter; Lachmayer, Roland; Vietor, Thomas
  Szenarien der Methodenanwendung : Ein White-Paper für die Methodenforschung
  Konstruktion 69 (11/12): 72-77 (2017)
  

2016

• Eilmus, Sandra
  Methodische Unterstützung der Entwicklung von Produktprogrammen mit hoher Kommunalität
  Open Access
• Design for X - Beiträge zum 27. DfX-Symposium Oktober 2016
  Open Access
• Gebhardt, Nicolas; Beckmann, Gregor; Lüsebrink, Sebastian; Fischer, Nikolai; Lutz, Hans Martin; Krause, Dieter
  ModSupport Project - Methodical development of an innovative modular construction kit for elevator systems
  Symposium Design for X, DFX: 3-14 (2016-10)
  Verlags DOI
• Eilmus, Sandra; Gumpinger, Thomas; Kipp, Thomas; Sankowski, Olga; Krause, Dieter
  Early phase estimation of variety induced complexity cost effects: a study on industrial cases in Germany
  Transdisciplinary Perspectives on Complex Systems: New Findings and Approaches : 271-303 (2016)
  Verlags DOI
• Sedlacik, Jan; Frölich, Andreas M. J.; Spallek, Johanna; Forkert, Nils Daniel; Faizy, Tobias Djamsched; Werner, Franziska; Knopp, Tobias; Krause, Dieter; Fiehler, Jens; Buhk, Jan-Hendrik
  Magnetic particle imaging for high temporal resolution assessment of aneurysm hemodynamics
  PloS one 8 (11): e0160097- (2016)
  Open Access | Verlags DOI
• Otto, Kevin N.; Hölttä-Otto, Katja; Simpson, Timothy W.; Krause, Dieter; Ripperda, Sebastian; Moon, Seung Ki
  Global Views on Modular Design Research: Linking Alternative Methods to Support Modular Product Family Concept Development
  Journal of mechanical design (138): 071101 (2016-07-01)
  Verlags DOI
• Spallek, Johanna; Krause, Dieter
  Process types of customisation and personalisation in design for additive manufacturing applied to vascular models
  Procedia CIRP (50): 281-286 (2016)
  Open Access | Verlags DOI
• Gebhardt, Nicolas; Krause, Dieter
  A method for designing visualisations as tools in product development
  International Design Conference, DESIGN: 611-620 (2016-05)
  
• Windheim, Marc; Hackl, Jennifer; Gebhardt, Nicolas; Krause, Dieter
  Assessing impacts of modular product architectures on the firm: a case study
  Proceedings of International Design Conference, DESIGN (DS 84): 1445-1454 (2016)
  
• Hackl, Jennifer; Krause, Dieter
  Effects of modular product structures on life phases and economic factors
  Proceedings of International Design Conference, DESIGN (DS 84): 1285-1294 (2016)
  
• Spallek, Johanna; Sankowski, Olga; Krause, Dieter
  Influences of additive manufacturing on design processes for customised products
  Proceedings of International Design Conference, DESIGN (DS 84): 513-522 (2016)
  
• Frölich, Andreas M. J.; Spallek, Johanna; Brehmer, Laurin; Buhk, Jan-Hendrik; Krause, Dieter; Fiehler, Jens; Kemmling, André
  3D printing of intracranial aneurysms using fused deposition modeling offers highly accurate replications
  American Journal of Neuroradiology 1 (37): 120-124 (2016)
  Verlags DOI
• Oltmann, Jan; Seemann, Ralf; Spallek, Johanna; Krause, Dieter
  Additively manufactured components for structural applications in aircraft interior - Two case studies
  DFX 2016: Proceedings of the 27th Symposium Design for X: 147-156 (2016)
  
• Sankowski, Olga; Wollesen, Bettina; Köhler, Berit; Krause, Dieter; Mattes, Klaus
  Avoiding fall related injuries in older adults - An interdisciplinary design approach
  Proceedings of NordDesign, NordDesign 2016 (1): (2016)
  
• Seemann, Ralf; Krause, Dieter
  Experimental and numerical analysis of Nomex honeycomb sandwich panel inserts parallel to the face sheets
  ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials: (2016)
  
• Laqua, Katrin; Malone, Karen; Hoffmann, Marko; Krause, Dieter; Schlüter, Michael
  Methane bubble rise velocities under deep-sea conditions—Influence of initial shape deformation
  Colloids and Surfaces A: Physicochemical and Engineering Aspects (505): 106-117 (2016)
  Verlags DOI
• Windheim, Marc; Krause, Dieter
  Opportunity cost of modularity: challenges and requirements for balancing the dilemma of product platforms
  DFX 2016: Proceedings of the 27th Symposium Design for X : 65-76 (2016)
  
• Chen, Yu; Seemann, Ralf; Krause, Dieter; Tay, Tong-Earn; Tan, Vincent B. C.
  Prototyping and testing of composite riser joints for deepwater application
  Journal of Reinforced Plastics and Composites 2 (35): 95-110 (2016)
  Open Access | Verlags DOI

2015

• Plaumann, Benedikt
  Systemanalyse und -synthese für die Auslegung varianter Leichtbaustrukturen unter dynamischen Lasten
  Open Access
• Schillo, Conny; Röstermundt, Dirk; Krause, Dieter
  Experimental and numerical study on the influence of imperfections on the buckling load of unstiffened CFRP shells
  Composite Structures (131): 128-138 (2015-11-01)
  Verlags DOI
• Bruchmüller, Tim; Mangold, Sebastian; Matthiesen, Sven; Oltmann, Jan; Rasmussen, Olaf; Krause, Dieter; Stücheli, Marius; Meboldt, Mirko
  An adjustable impedance element - System requirements and design approach
  Symposium Design for X, DFX: 133-144 (2015-10-07)
  
• Ripperda, Sebastian; Krause, Dieter
  Cost prognosis of modular product structure concepts
  International Conference on Engineering Design, ICED DS80-07 (7): 13-22 (2015-07)
  
• Kruse, Moritz; Ripperda, Sebastian; Krause, Dieter
  Platform concept development within the integrated PKT-Approach
  International Conference on Engineering Design, ICED DS 80-07 (7): 73-82 (2015-07)
  
• Bahns, Tammo; Beckmann, Gregor; Gebhardt, Nicolas; Krause, Dieter
  Sustainability of modular product families
  Proceedings of the International Conference on Engineering Design, ICED DS80-07 (7): 185-194 (2015-07)
  
• Seemann, Ralf; Krause, Dieter
  Virtual testing of nomex honeycomb sandwich panel inserts
  ICCM International Conferences on Composite Materials (2020-07)
  
• Halfmann, Niklas
  Montagegerechtes Produktstrukturieren im Kontext einer Lebensphasenmodularisierung
  Open Access
• Brosch, Max
  Eine Methode zur Reduzierung der produktvarianteninduzierten Komplexität
  Open Access
• Wannicke, Nicola; Frindte, Katharina; Gust, Giselher; Liskow, Iris; Wacker, Alexander; Meyer, Andreas; Grossart, Hans Peter
  Measuring bacterial activity and community composition at high hydrostatic pressure using a novel experimental approach: A pilot study
  FEMS Microbiology Ecology 5 (91): fiv036 - (2015)
  Verlags DOI

2014

• Gebhardt, Nicolas; Bahns, Tammo; Krause, Dieter
  An example of visually supported design of modular product families
  Procedia CIRP (21): 75-80 (2014)
  Open Access | Verlags DOI
• Paetzold, Kristin; Wartzack, Sandro; Krause, Dieter
  Platform of design method for developing mobility-preserving products
  Procedia CIRP (21): 409-414 (2014)
  Open Access | Verlags DOI
• Krause, Dieter; Paetzold, Kristin; Wartzack, Sandro
  Design for X - Beiträge zum 25. DfX-Symposium Oktober 2014
  Open Access
• Elstner, Steffen; Krause, Dieter
  Methodical approach for consideration of ramp-up risks in the product development of complex products
  Procedia CIRP (20): 20-25 (2014)
  Open Access | Verlags DOI
• Eilmus, Sandra; Krause, Dieter
  Product life-oriented development of component commonality and variety
  Proceedings of the ASME International Mechanical Engineering Congress and Exposition - 2013 : presented at ASME 2013 International Mechanical Engineering Congress and Exposition ; November 15 - 21, 2013, San Diego, California, USA. - New York, NY : ASME. - Vol. 12 (2014).
  Verlags DOI

2013

• Malik, Arif S.; Kuba, Cornelius
  Power generation expansion planning including large scale wind integration: A case study of Oman
  Journal of Wind Energy: 735693 (2013)
  Open Access | Verlags DOI
• Kleeberg, Andreas; Hupfer, Michael; Gust, Giselher; Salka, Ivette; Pohlmann, Kirsten; Grossart, Hans Peter
  Intermittent riverine resuspension : effects on phosphorus transformations and heterotrophic bacteria
  Limnology and Oceanography 2 (58): 635-652 (2013)
  Verlags DOI
• Krause, Dieter; Ripperda, Sebastian
  An assessment of methodical approaches to support the development of modular product families
  ICED 13, the 19th International Conference on Engineering Design, 19th - 22nd August 2013, Sungkyunkwan University (SKKU), Seoul, Korea / organised by Creative Design Institute, Sungkyunkwan University and the Design Society. Ed. by Udo Lindemann .... Castle Cary, Somerset : Design Society. - Vol. 4 (2013). - Seite 31-40
  
• Usbeck, Anna K.
  Auslegung von keramischen Strukturbauteilen unter mehraxialer statischer und zyklischer Beanspruchung
  Open Access
• Krause, Dieter; Paetzold, Kristin; Wartzack, Sandro; Bahns, Tammo; Braun, Birgit; Breitsprecher, Thilo; Caballero, Steffen; Eifler, Tobias; Eilmus, Sandra; Gembarski, Paul Christoph; Gerber, Peter; Griesbach, Marc; Inkermann, David; Kamin, Stefan Thomas; Kissel, Maximilian; Klein, Daniel; Kreimeyer, Matthias F.; Küstner, Christof; Lachmayer, Roland; Lang, Frieder R.; Leichnitz, Julia Constanze; Leutenecker, Bastian; Lohmeyer, Quentin; Luft, Thomas; Malone, Karen; Nemetzade, Tanja; Njindam, Thierry Sop; Plaumann, Benedikt; Räse, Ulf; Rasmussen, Olaf; Richter, Markus; Ripperda, Sebastian; Sauthoff, Bastian; Seemann, Ralf; Spielberger, Patrick; Stangl, Thomas; Vietor, Thomas; Wohlgemuth, Martin; Ziegler, Philipp; Zier, Sebastian
  Design for X - Beiträge zum 24. DfX-Symposium September 2013
  Open Access
• Usbeck, Anna K.; Krause, Dieter
  Design for durability : designing with advanced ceramics
  ICED 13, the 19th International Conference on Engineering Design, 19th - 22nd August 2013, Sungkyunkwan University (SKKU), Seoul, Korea / organised by Creative Design Institute, Sungkyunkwan University and the Design Society. Ed. by Udo Lindemann .... Castle Cary, Somerset : Design Society. - Vol. 5 (2013). - Seite 221-230
  
• Jonas, Henry
  Eine Methode zur strategischen Planung modularer Produktprogramme
  Zuerst veröffentlicht: 978-3-941492-65-3
  Open Access
• Elstner, Steffen; Krause, Dieter
  From product development to market introduction : a co-citation analysis in the field of ramp-up
  ICED 13, the 19th International Conference on Engineering Design, 19th - 22nd August 2013, Sungkyunkwan University (SKKU), Seoul, Korea / organised by Creative Design Institute, Sungkyunkwan University and the Design Society. Ed. by Udo Lindemann .... Castle Cary, Somerset : Design Society. - Vol. 1 (2013). - Seite 289-298
  
• Ripperda, Sebastian; Krause, Dieter
  Komplexitätskosteneffekte modularer Produktfamilien [Complexity cost effects of modular product families]
  Design for X : Beiträge zum 24. DfX-Symposium September 2013 / Institut für Produktentwicklung und Konstruktionstechnik, Institut für Technische Produktentwicklung, ... Dieter Krause; Kristin Paetzold, Sandro Wartzack (Hrsg.). - Hamburg : TuTech Verl., 2013. - Seite 13-24
  Verlags DOI
• Leichnitz, Julia Constanze; Eilmus, Sandra
  Methoden für die Entwicklung modularer Produkte bei der Jungheinrich AG [Methods for the development of modular products at the Jungheinrich AG]
  Design for X : Beiträge zum 24. DfX-Symposium September 2013 / Institut für Produktentwicklung und Konstruktionstechnik, Institut für Technische Produktentwicklung, ... Dieter Krause; Kristin Paetzold, Sandro Wartzack (Hrsg.). - Hamburg : TuTech Verl., 2013. - Seite 153-162
  Verlags DOI
• Kipp, Thomas
  Methodische Unterstützung der variantengerechten Produktgestaltung
  Open Access
• Hackl, Jennifer; Gumpinger, Thomas; Rüegg, Ulf; Krause, Dieter
  Multi-domain modeling with graph databases
  Reducing risk in innovation : proceedings of the 15th International DSM Conference Melbourne, Australia, 29–30 August 2013 / Elke Scheurmann ... - München : Hanser, 2013. - Seite 47-54
  
• Wohlgemuth, Martin; Spielberger, Patrick; Seemann, Ralf
  Notwendigkeit von detaillierteren FE-Modellen zur Effizienzsteigerung der Produktion von Flugzeugküchen [Need for detailed FE models for the increase in efficiency of the production of galleys]
  Design for X : Beiträge zum 24. DfX-Symposium September 2013 / Institut für Produktentwicklung und Konstruktionstechnik, Institut für Technische Produktentwicklung, ... Dieter Krause; Kristin Paetzold, Sandro Wartzack (Hrsg.). - Hamburg : TuTech Verl., 2013. - Seite 221-230
  Verlags DOI
• Bahns, Tammo; Krause, Dieter
  Pflege modularer Produktfamilien nach dem Markteintritt durch die Produktentwicklung [Maintenance of modular product families after market entry through product development]
  Design for X : Beiträge zum 24. DfX-Symposium September 2013 / Institut für Produktentwicklung und Konstruktionstechnik, Institut für Technische Produktentwicklung, ... Dieter Krause; Kristin Paetzold, Sandro Wartzack (Hrsg.). - Hamburg : TuTech Verl., 2013. - Seite 209-220
  Verlags DOI
• Beckmann, Gregor; Krause, Dieter
  Process visualisation of product family development methods
  ICED 13, the 19th International Conference on Engineering Design, 19th - 22nd August 2013, Sungkyunkwan University (SKKU), Seoul, Korea / organised by Creative Design Institute, Sungkyunkwan University and the Design Society. Ed. by Udo Lindemann .... Castle Cary, Somerset : Design Society. - Vol. 4 (2013). - Seite 169-178
  
• Malone, Karen; Seemann, Ralf; Krause, Dieter
  Realisierung komplexer Versuchsaufbauten in Hochdrucktestumgebungen [Realization of complex test setups in high-pressure test environments]
  Design for X : Beiträge zum 24. DfX-Symposium September 2013 / Institut für Produktentwicklung und Konstruktionstechnik, Institut für Technische Produktentwicklung, ... Dieter Krause; Kristin Paetzold, Sandro Wartzack (Hrsg.). - Hamburg : TuTech Verl., 2013. - Seite 187-196
  Verlags DOI
• Malik, Arif S.; Kuba, Cornelius
  Strategic planning of power supply in Oman including wind energy considerations
  AFRICON, 2013 : 9 - 12 Sept. 2013, Le Meridien Hotel, Pointe-aux-Piments, Mauritius / IEEE; IEEE Region 8 ... - Piscataway, NJ : IEEE. - Vols. 1(2013) - 2(2013), Art.-Nr. 6757816, 5 Seiten
  Verlags DOI
• Plaumann, Benedikt; Rasmussen, Olaf; Krause, Dieter
  System analysis and synthesis for the dimensioning of variant lightweight cabin interior
  Structures, Structural Dynamics, and Materials and Co-located Conferences$d54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. - Reston, VA : AIAA (American Institute of Aeronautics and Astronautics, 2013. - Article number AIAA 2013-1632
  
• Eilmus, Sandra; Ripperda, Sebastian; Krause, Dieter
  Towards the development of commonal product programs
  ICED 13, the 19th International Conference on Engineering Design, 19th - 22nd August 2013, Sungkyunkwan University (SKKU), Seoul, Korea / organised by Creative Design Institute, Sungkyunkwan University and the Design Society. Ed. by Udo Lindemann .... Castle Cary, Somerset : Design Society. - Vol. 4 (2013). - Seite 209-218
  
• Schillo, Conny; Krause, Dieter
  Uncertainties in the prediction of CFRP laminate properties in the context of a reliability based design approach
  International Conference on Composite Materials 2013 : (ICCM-19) ; Montreal, Quebec, Canada, 28 July - 2 August 2013 / [organized by Canadian Association for Composite Structures and Materials (CACSMA)]. Ed.: Suong Van Hoa. - Red Hook, NY : Curran. - Vol. 2 (2013), Seite 961-968
  
• Rasmussen, Olaf; Plaumann, Benedikt; Krause, Dieter
  Untersuchung von Einflussfaktoren auf die Systemgrenzengestaltung bei dynamischen Versuchen [Investigation of influencing factors on the design of system boundaries in dynamic experiments]
  Design for X : Beiträge zum 24. DfX-Symposium September 2013 / Institut für Produktentwicklung und Konstruktionstechnik, Institut für Technische Produktentwicklung, ... Dieter Krause; Kristin Paetzold, Sandro Wartzack (Hrsg.). - Hamburg : TuTech Verl., 2013. - Seite 143-152
  Verlags DOI

2012

• Leupold, Marco; Hindersin, Stefan; Gust, Giselher; Kerner, Martin; Hanelt, Dieter
  Influence of mixing and shear stress on Chlorella vulgaris, Scenedesmus obliquus, and Chlamydomonas reinhardtii
  Journal of Applied Phycology 2 (25): 485-495 (2013)
  Verlags DOI
• Design for X : Beiträge zum 23. DfX-Symposium Oktober 2012
  Open Access
• Gebhardt, Nicolas; Beckmann, Gregor; Krause, Dieter
  Product family models and knowledge transfer support for the development of modular product families
  NordDesign - 9th NordDesign Conference (2012)
  

2011

• Krause, Dieter; Eilmus, Sandra
  A methodical approach for developing modular product families
  ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design ; 15th - 18th August 2011, Copenhagen, Denmark. - (DS / Design Society ; 68). - Vol. 4: Seite 299-308 (2011)
  
• Gumpinger, Thomas; Jonas, Henry; Plaumann, Benedikt; Krause, Dieter
  A visualization concept for supporting module lightweight design
  ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design ; 15th - 18th August 2011, Copenhagen, Denmark. - (DS / Design Society ; 68). - Vol. 10 (PART 2): Seite 349-359 (2011)
  
• Brosch, Max; Beckmann, Gregor; Krause, Dieter
  Approach to visualize the supply chain complexity induced by product variety
  ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design ; 15th - 18th August 2011, Copenhagen, Denmark. - (DS / Design Society ; 68). - Vol. 5: Seite 249-258 (20111)
  
• Usbeck, Anna K.; Krause, Dieter; Albers, Albert
  Auslegungskriterien für keramische Bauteile
  Konstruktion 2011 (6): 59-60 (2011)
  
• Halfmann, Niklas; Elstner, Steffen; Krause, Dieter
  Definition and evaluation of modular product structures in the context of design for assembly
  Proceedings of the ASME Design Engineering Technical Conference 9 (): 841-848 (2011)
  Verlags DOI
• Elstner, Steffen; Krause, Dieter
  Design for Ramp-up komplexer Produkte am Beispiel der Flugzeugindustrie [Design for ramp-up of complex products using the aircraft industry as an example]
  Design for X : Beiträge zum 22. DfX-Symposium, Oktober 2011. - Hamburg-Harburg : TuTech Verl., 2011. - Seite 229-240 (2011)
  
• Brosch, Max; Beckmann, Gregor; Krause, Dieter; Griesbach, Marc; Dalhöfer, Jörg
  Design for Value Chain : Handlungsfelder zur ganzheitlichen Komplexitätsbeherrschung [Design for value chain : Fields of action for the holistic mastery of complexity]
  Design for X : Beiträge zum 22. DfX-Symposium, Oktober 2011. - Hamburg-Harburg : TuTech Verl., 2011. - Seite 67-78 (2011)
  
• Design for X - Beiträge zum 22. DfX-Symposium Oktober 2011
  Krause, Dieter/Paetzold, Kristin/Wartzack, Sandro (Hg.) (2011): Design for X. Beiträge zum 22. DfX-Symposium Oktober 2011. Hamburg-Harburg: TuTech Verl.
  Open Access
• Brosch, Max; Krause, Dieter
  Design for supply chain requirements an approach to detect the capabilities to postpone
  Proceedings of the ASME Design Engineering Technical Conference 9 (): 701-709 (2011)
  Verlags DOI
• Beckmann, Gregor; Krause, Dieter
  Development of functional mock-ups for engineering design education
  Design education for creativity and business innovation : proceedings of the 13th International Conference on Engineering and Product Design Education, City University, London, UK, 8th - 9th September 2011 ; E&PDE. - (DS / Design Society ; 69): Seite 245-250 (2011)
  
• Gumpinger, Thomas; Krause, Dieter
  Development of modular products under consideration of lightweight design
  ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design ; 15th - 18th August 2011, Copenhagen, Denmark. - (DS / Design Society ; 68). - Vol. 4: Seite 175-184 (2011)
  
• Blees, Christoph
  Eine Methode zur Entwicklung modularer Produktfamilien
  Open Access
• Schmidt, Jens; Krause, Dieter
  Fluid qualification tests : correlations between laboratory and application related tests
  BALTTRIB 2011 - 6th International Scientific Conference, Dedicated to 65th Anniversary of Faculty of Agricultural Engineering, Proceedings. - 2011. - Seite 19-24
  
• Beckmann, Gregor; Krause, Dieter
  Machine part exhibition and functional mock-ups to enrich design education
  ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design ; 15th - 18th August 2011, Copenhagen, Denmark. - (DS / Design Society ; 68). - Vol. 8: Seite 130-139 (2011)
  
• Eilmus, Sandra; Beckmann, Gregor; Krause, Dieter
  Modulare Strukturen methodisch in Unternehmen umsetzen - Entwicklung von Standardumfängen und Integration von Erfahrungswissen [Methodically implementing modular structures in the company : development of standard scopes and integration of practical knowledge]
  Design for X : Beiträge zum 22. DfX-Symposium, Oktober 2011. - Hamburg-Harburg : TuTech Verl., 2011. - Seite 99-118 (2011)
  
• Krüger, Daniel; Eilmus, Sandra; Schmidt, Johanna; Wartzack, Sandro; Krause, Dieter; Paetzold, Kristin
  Notwendigkeit für eine Methodenplattform zur Entwicklung von Produkten für nutzerspezifische Mobilitätsbedürfnisse [Need for a platform of methods for the development of products for user-specific mobility requirements]
  Design for X : Beiträge zum 22. DfX-Symposium, Oktober 2011. - Hamburg-Harburg : TuTech Verl., 2011. - Seite 265-276 (2011)
  
• Halfmann, Niklas; Elstner, Steffen; Krause, Dieter
  Product and process evaluation in the context of modularization for assembly
  ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design ; 15th - 18th August 2011, Copenhagen, Denmark. - (DS / Design Society ; 68). - Vol. 5: Seite 271-281 (2011)
  
• Jonas, Henry; Krause, Dieter
  Strategic planning for modular product families
  ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design ; 15th - 18th August 2011, Copenhagen, Denmark. - (DS / Design Society ; 68). - Vol. 4: Seite 112-121 (2011)
  
• Gumpinger, Thomas; Krause, Dieter
  Tracing of weight propagation for modular product families
  Invest on visualization : proceedings of the 13th International DSM Conference, Cambridge, MA, USA, 14 - 15 September 2011. - München, 2011 (): Seite 103-114 (2011)