Publication List

Prof. Dr.-Ing. habil. Prof. E.h. Dr. h.c. Stefan Heinrich

Publication statistics: ORCID, Scopus, Google Scholar

Refeered journal contributions

2025	Salloum, N., Brinz, T., Atxutegi, A., Heinrich, S.: Design and optimization of stirrer and mixer design for the correct mixing of pharmaceutical powders through DEM Powder Technology, 449 (2025) 120413, DOI: 10.1016/j.powtec.2024.120413
2024	Sadeq, A., Pietsch-Braune, S., Heinrich, S.: Impact of Press Channel Diameter-to-Length Ratio on the Mechanical Properties of Biomass Pellets during Storage Fuel Processing Technology, 265 (2024), DOI: 10.1016/j.fuproc.2024.108149 Stöckl, G., Atxutegi, A., Bellinghausen, S., Heinrich, S.: Employing a Multi-Resonance Microwave Sensor for In-Line Moisture Monitoring of Fluidized Bed Agglomeration Chemical Engineering Journal, 499 (2024), DOI: 10.1016/j.cej.2024.156053 Orth, M., Atxutegi, A., Börner, M., Pietsch-Braune, S., Heinrich, S.: CFD-DEM modeling for optimized liquid distribution in fluidized bed spray granulation Powder Technology, 448 (2024) 120299, DOI: 10.1016/j.powtec.2024.120299 Orth, M., Börner, M., Pietsch-Braune, S., Heinrich, S.: Influence of spray parameters on injected droplets and product properties in fluidized bed spray granulation Powder Technology, 448 (2024) 120274, DOI: 10.1016/j.powtec.2024.120274 Yadav, N., Ansari, Z., Singh, R., Das, A., Singh, S., Heinrich, S., Singh, M.: Explicit and approximate solutions for a classical hyperbolic fragmentation equation using a hybrid projected differential transform method Physics of Fluids, 36 (2024) 9, DOI: 10.1063/5.0225671 Kramm, K., Heuer, J., Meunier, V., Haas, K., Arbter, P., Heinrich, S.: Integration of oleaginous yeast-produced lipids into plant-based milk alternatives Journal of Food Engineering, 383 (2024), DOI: 10.1016/j.jfoodeng.2024.112228 Santos, R.M., Alves, C.L., De Noni Jr., A., Quadri, M.B., Heinrich, S.: Phenomenological model of moisture redistribution in porcelain stoneware spray-dried powder stored in silo Powder Technology, 444 (2024), DOI: 10.1016/j.powtec.2024.120079 Bunke, F., Pietsch-Braune, S., Heinrich, S.: Three-dimensional measurement method of binary particle collisions under dry and wet conditions Chemical Engineering Journal, 489 (2024), DOI: 10.1016/j.cej.2024.151016 Watson, B., Lindmüller, L., Heinrich, S., S. Theuerkauf, J., Yao, Y., Fan, Yi.: Dynamic Bubble Tracking in Fluidized Beds via Electrical Capacitance Volume Tomography Chemical Engineering Journal, 487 (2024), DOI: 10.1016/j.cej.2024.150461 Yadav, S., Singh, M., Singh, S., Heinrich, S., Kumar, J.: Modified variational iteration method and its convergence analysis for solving nonlinear aggregation population balance equation Computers and Fluids, 274 (2024), DOI: 10.1016/j.compfluid.2024.106233 Buchholz, M., Weis, D., Togni, R., Goniva, C., Heinrich, S.: Describing the Drying and Solidification Behavior of Single Suspension Droplets Using a Novel Unresolved CFD-DEM Simulation Approach Processes, 12 (2024) 3, DOI: 10.3390/pr12030480 Yadav, N., Singh, M., Singh, S., Singh, R., Kumar, J., Heinrich, S.: An efficient approach to obtain analytical solution of nonlinear particle aggregation equation for longer time domains Advanced Powder Technology, 35 (2024) 3, DOI: 10.1016/j.apt.2024.104370 Kramm, K., Roucher, A., Busom Descarrega, J., Ambühl, M., Kammerhofer, J., Meunier, V., Heinrich, S.: Influence of material characteristics on plant-based milk alternative properties Journal of Food Engineering, 373 (2024), DOI: 10.1016/j.jfoodeng.2024.112019 Alves, C.L., Heinrich, S.: Improving the analysis of heat transfer in packed beds: A comparative study between DEM simulations and existing literature models Chemical Engineering Research and Design, 203 (2024), DOI: 10.1016/j.cherd.2024.01.062 Atxutegi, A., Atzori, M., Bettien, J., Lichtenegger, T., Puttinger, S., Pirker, S., Heinrich, S.: Control of segregation by non-uniform aeration in a fluidized bed spray granulator Powder Technology, 435 (2024), DOI: 10.1016/j.powtec.2023.119348 Vaca Guerra, M., Harshe, Y. M., Fries, L., Payan Lozada, J., Atxutegi, A., Palzer, S., Heinrich, S.: Modeling the extraction of espresso components as dispersed flow through a packed bed Journal of Food Engineering, 368 (2024), DOI: 10.1016/j.jfoodeng.2023.111913
2023	Leong, S.L., Singh, M., Ahamed, F., Heinrich, S., Tiong, S.I.X., Chew, I.M.L., Ho, Y.K.: A comparative study of the fixed pivot technique and finite volume schemes for multi-dimensional breakage population balances Advanced Powder Technology, 34 (2023) 12, DOI: 10.1016/j.apt.2023.104272 Witte, J., Hua, Z.C., Kolck, V., Kruggel-Emden, H., Heinrich, S., Schmidt, E.: Investigation of a Jet-Based Direct Mixing Process for Improved Structuring of Conductive Battery Hetero-Agglomerates Processes, 11 (2023) 11, DOI: 10.3390/pr11113243 Alves, C.L., Skorych, V., De Noni Jr, A., Hotza, D., González, S.Y.G., Heinrich, S.: Optimizing Raw Material Composition to Increase Sustainability in Porcelain Tile Production: A Simulation-Based Approach Journal of the American Ceramic Society, 2023, DOI: 10.1111/jace.19581 Santos, R.M., Alves, C.L., De Noni Jr., A., Quadri, M.B., Heinrich, S.: Moisture sorption isotherm and effective diffusion coefficient of porcelain stoneware spray-dried powder Powder Technology, 430 (2023), DOI: 10.1016/j.powtec.2023.119028 Safdar, W., Rotter, S., Orth, M., Heinrich, S., Düster, A.: Simulation of the mechanical behaviour of coated particles using DEM‐BPM Proceedings in Applied Mathematics and Mechanics, 23 (2023), e202300124, DOI: 10.1002/pamm.202300124 Sadeq, A., Frank, A., Tyslik, M., Jägers, J., Pietsch-Braune, S., Scherer, V., Heinrich, S.: Influence of cyclic water content changes during long-term storage on the mechanical stability of wood pellets Powder Technology, 428 (2023), DOI: 10.1016/j.powtec.2023.118866 Alves, C.L., Skorych, V., De Noni Jr, A., Hotza, D., González, S.Y.G., Heinrich, S.: Microscale DEM Simulation of Spray-Dried Porcelain Granules under Uniaxial Compaction Powder Technology, 428 (2023), DOI: 10.1016/j.powtec.2023.118863 Atxutegi, A., Kieckhefen, P., Pietsch, S., Aguado, R., Bilbao, J., Heinrich, S., Olazar, M.: Solid-fluid mixing behavior of conical spouted beds with internal devices Advanced Powder Technology, 34 (2023) 9, DOI: 10.1016/j.apt.2023.104136 Wang, S., Dymala, T., Heinrich, S., Shen, L.: Biomass pellet fueled chemical looping gasification: Reaction kinetics study with a fluidized bed - thermogravimetric analysis International Journal of Greenhouse Gas Control, 126 (2023), DOI: 10.1016/j.ijggc.2023.103913 Sadeq, A., Heinrich, D., Pietsch-Braune, S., Heinrich, S.: Influence of Oscillating Water Content on the Structure of Biomass Pellets Powder Technology, 426 (2023), DOI: 10.1016/j.powtec.2023.118631 Vaca Guerra, M., Harshe, Y. M., Fries, L., Pietsch-Braune, S., Palzer, S., Heinrich, S.: Tuning the packed bed configuration for selective extraction of espresso non-volatiles based on polarity Journal of Food Engineering, 354 (2023), DOI: 10.1016/j.jfoodeng.2023.111554 Jarolin, K., Wang, S., Dymala, T., Song, T., Heinrich, S., Shen, L., Dosta, M.: Characterizing devolatilized wood pellets for fluidized bed applications Biomass Conversion and Biorefinery, 13 (2023), DOI: 10.1007/s13399-021-01486-x Das, A., Paul, A., Heinrich, S., Kumar, J.: Development and analysis of moments preserving finite volume schemes for multi-variate nonlinear breakage model Proceedings of the Royal Society A, 479 (2023), DOI: 10.1098/rspa.2022.0658 Grohn, P., Heinrich, S., Antonyuk, S.: Numerical Investigation of the Particle Dynamics in a Rotorgranulator Depending on the Properties of the Coating Liquid Pharmaceutics, 15 (2023) 469, DOI: 10.3390/pharmaceutics15020469 Orth, M., Rotter, S., Safdar, W., Tasdemir, S., Pietsch-Braune, S., Heinrich, S., Düster, A.: Fluidized Bed Spray Coating for Improved Mechanical Properties of Particles Processes, 11 (2023) 2, DOI: 10.3390/pr11020314 Alves, C.L., Skorych, V., De Noni Jr, A., Hotza, D., González, S.Y.G., Heinrich, S., Dosta, M.: Improving the sustainability of porcelain tile manufacture by flowsheet simulation Ceramics International, 49 (2023) 24581-24597, DOI: 10.1016/j.ceramint.2023.01.056 Alves, C.L., Skorych, V., De Noni Jr, A., Hotza, D., González, S.Y.G., Heinrich, S.: Application of Flowsheet Simulation Methodology to Improve Productivity and Sustainability of Porcelain Tile Manufacturing Machines, 11 (2023) 137, DOI: 10.3390/machines11020137 Kramm, K., Orth, M., Teiwes, A., Kammerhofer, J. C., Meunier, V., Pietsch-Braune, S., Heinrich, S.: Influence of Nozzle Parameters on Spray Pattern and Droplet Characteristics for a Two-Fluid Nozzle Chemie Ingenieur Technik, 95 (2023) 1-2, DOI: 10.1002/cite.202200152 Ait Ouazzou, A., Harshe, Y. M., Meunier, V., Finke, J. H., Heinrich, S.: Influence of process parameters and particle size distribution on mechanical properties of tablets Chemie Ingenieur Technik, 95 (2023) 1-2, DOI: 10.1002/cite.202200157 Lindmüller, L., Haus, J., Heinrich, S.: Experiments on the Dynamic Behavior of the Chemical Looping Combustion Process Chemie Ingenieur Technik, 95 (2023) 1-2, DOI: 10.1002/cite.202200155 Grohn, P., Schaedler, L., Atxutegi, A., Heinrich, S., Antonyuk, S.: CFD-DEM simulation of superquadric cylindrical particles in a spouted bed and a rotor granulator Chemie Ingenieur Technik, 95 (2023) 1-2, DOI: 10.1002/cite.202200121 Vaca Guerra, M., Harshe, Y. M., Fries, L., Rothberg, H., Palzer, S., Heinrich, S.: Influence of particle size distribution on espresso extraction via packed bed compression Journal of Food Engineering, 340 (2023), DOI: 10.1016/j.jfoodeng.2022.111301
2022	Chan, T. T., Heinrich, S., Grabe, J., Dosta, M.: Microscale modelling of frozen particle fluid systems with a bonded-particle model method Materials, 15 (2022) 23, DOI: 10.3390/ma15238505 Depta, P. N., Dosta, M., Wenzel, W., Kozlowska, M., Heinrich, S.: Hierarchical Coarse-Grained Strategy for Macromolecular Self-Assembly: Application to Hepatitis B Virus-Like-Particles International Journal of Molecular Sciences, 23 (2022) 23, DOI: 10.3390/ijms232314699 Skorych, V., Buchholz, M., Dosta, M., Baust, H. K., Gleiß, M., Haus, J., Weis, D., Hammerich, S., Kiedorf, G., Asprion, N., Nirschl, H., Kleine Jäger, F., Heinrich, S.: Use of Multiscale Data-Driven Surrogate Models for Flowsheet Simulation of an Industrial Zeolite Production Process Processes, 10 (2022) 10, DOI: 10.3390/pr10102140 Wang, S., Song, T., Jarolin, K., Dymala, T., Dosta, M., Heinrich, S., Shen, L.: Mixing evolution behavior of raw and gasified biomass pellets in a fluidized bed reactor Chemical Engineering Science, 264 (2022), DOI: 10.1016/j.ces.2022.1181611 Grohn, P., Oesau, T., Heinrich, S., Antonyuk, S.: Investigation of the influence of wetting on the particle dynamics in a fluidized bed rotor granulator by MPT measurements and CFD-DEM simulations Powder Technology, 408 (2022), DOI: 10.1016/j.powtec.2022.117736 Kieckhefen, P., Pietsch-Braune, S., Heinrich, S.: Product-Property Guided Scale-Up of a Fluidized Bed Spray Granulation Process using the CFD-DEM Method Processes, 10 (2022) 7, DOI: 10.3390/pr10071291 Dymala, T., Wang, S., Jarolin, K., Song, T., Shen, L., Dosta, M., Heinrich, S.: MP-PIC Simulation of Biomass Steam Gasification Using Ilmenite as Oxygen Carrier Atmosphere, 13 (2022) 7, DOI: 10.3390/atmos13071009 Buchholz, M., Haus, J., Pietsch-Braune, S., Kleine Jäger, F., Heinrich, S.: CFD-aided population balance modeling of a spray drying process Advanced Powder Technology, 33 (2022) 7, DOI: 10.1016/j.apt.2022.103636 Lindmüller, L., Haus, J., Heinrich, S.: High volatile conversion in a Chemical Looping Combustion system with three different biomasses Energy & Fuels, 36 (2022) 17, DOI: 10.1021/acs.energyfuels.2c00901 Grohn, P., Oesau, T., Heinrich, S., Antonyuk, S.: Investigation of the influence of impact velocity and liquid bridge volume on the maximum liquid bridge length Advanced Powder Technology, 33 (2022) 6, DOI: 10.1016/j.apt.2022.103630 Jarolin, K., Dymala, T., Heinrich, S., Dosta, M.: Modeling the devolatilization and fragmentation of biomass pellets with the bonded particle method for fluidized bed applications Computational Particle Mechanics, 2022, DOI: 10.1007/s40571-022-00467-9 Chilev, C., Simeonov, E., Dimitrova, B., Yonkova, V., Pietsch, S., Heinrich, S., Peshev, D.: Valorization of waste lavender residue from the essential oil industry for production of rosmarinic acid - a study on the solid-liquid extraction Journal of Chemical Technology and Metallurgy, 57 (2022) 3, 522-532, Accepted Levin, P., Buchholz, M., Meunier, V., Kessler, U., Palzer, S., Heinrich, S.: Comparison of Knudsen Diffusion and the Dusty Gas Approach for the Modeling of the Freeze-Drying Process of Bulk Food Products Processes, 10 (2022) 3, DOI: 10.3390/pr10030548 Das, A., De, T., Kaur, G., Dosta, M., Heinrich, S., Kumar, J.: An efficient multiscale bi-directional PBM-DEM coupling framework to model one-dimensional aggregation mechanism Proceedings of the Royal Society A, 478 (2022), DOI: 10.1098/rspa.2022.0076 Eichler, C., Pietsch-Braune, S., Dosta, M., Schmidt, A., Heinrich, S.: Micromechanical Analysis of Roller Compaction Process with DEM Powder Technology, 398 (2022), DOI: 10.1016/j.powtec.2022.117146 Lindmüller, L., Haus, J., Nair, A. R. K., Heinrich, S.: Minimizing gas leakages in a system of coupled fluidized bed reactors for chemical looping combustion Chemical Engineering Science, 250 (2022), DOI: 10.1016/j.ces.2021.117366 Depta, P. N., Gurikov, P., Schroeter, B., Forgács, A., Kalmár, J., Paul, G., Marchese, L., Heinrich, S., Dosta, M.: DEM-Based Approach for the Modeling of Gelation and Its Application to Alginate Journal of Chemical Information and Modeling, 62 (2022) 1, 49-70, DOI: 10.1021/acs.jcim.1c01076 Oesau, T., Grohn, P., Pietsch-Braune, S., Antonyuk, S.,Heinrich, S.: Novel approach for measurement of restitution coefficient by magnetic particle tracking Advanced Powder Technology, 33 (2022) 1, DOI: 10.1016/j.apt.2021.11.014
2021	Rothberg, H. S., Pietsch, S., Spahr, L., Kanina, Y., Heinrich, S.: Production of Magnetite-Polyvinyl Butyral Composites Using a Nano Spray Dryer Powder Technology, 394 (2021), DOI: 10.1016/j.powtec.2021.08.063 Orth, M., Kieckhefen, P., Pietsch, S., Heinrich, S.: Correlating granule surface structure morphology and process conditions in fluidized bed layering spray granulation KONA Powder and Particle Journal, 2021, DOI: 10.14356/kona.2022016 Levin, P., Meunier, V., Kessler, U., Heinrich, S.: Influence of Freezing Parameters on the Formation of Internal Porous Structure and Its Impact on Freeze-Drying Kinetics Processes, 9 (2021) 8, DOI: 10.3390/pr9081273 Wang, S., Yin, X., Jarolin, K., Dymala, T., Xu, J., Yin, S., Dosta, M., Song, T., Heinrich, S., Shen, S.: Mechanical strength evolution of biomass pellet during chemical looping gasification in fluidized bed Fuel Processing Technology, 2021, Volume 221, DOI: 10.1016/j.fuproc.2021.106951 Dymala, T., Wytrwat, T., Heinrich, S.: MP-PIC simulation of circulating fluidized beds using an EMMS based drag model for Geldart B particles Particuology, 59 (2021), DOI: 10.1016/j.partic.2021.07.002 Schroeter, B., Yonkova, V. P., Goslinska, M., Orth, M., Pietsch, S., Gurikov, P., Smirnova, I., Heinrich, S.: Spray Coating of Cellulose Aerogel Particles in a Miniaturized Spouted Bed Cellulose, 2021, DOI: 10.1007/s10570-021-04032-0 Atxutegi, A., Kieckhefen, P., Pietsch, S., Aguado, R., Olazar, M., Heinrich, S.: Unresolved CFD-DEM simulation of spherical and ellipsoidal particles in conical and prismatic spouted beds Powder Technology, 389 (2021), 493–506, DOI: 10.1016/j.powtec.2021.05.012 Di Renzo, A., Scala, F., Heinrich, S.: Recent Advances in Fluidized Bed Hydrodynamics and Transport Phenomena - Progress and Understanding Processes 2021, 9(4), 639, DOI: 10.3390/pr9040639 Buchholz, M., Haus, J., Blesinger, L., Riemann, C., Pietsch, S., Kleine Jäger, F., Heinrich, S.: Process Design of a Multistage Drying Process via Flowsheet Simulation Chemie Ingenieur Technik, 2021, 93, No. 8, DOI: 10.1002/cite.202000207 Buchholz, M., Haus, J., Polt, F., Pietsch, S., Schönherr, M., Kleine Jäger, F., Heinrich, S.: Dynamic model development based on experimental investigations of acoustically levitated suspension droplets International Journal of Heat and Mass Transfer, 2021, Volume 171, DOI: 10.1016/j.ijheatmasstransfer.2021.121057 Lehmann, S. E., Buchholz, M., Jongsma, A., Innings, F., Heinrich, S.: Modeling and Flowsheet Simulation of Vibrated Fluidized Bed Dryers Processes, 2021, 9(1), 52, DOI: 10.3390/pr9010052
2020	Lehmann, S. E., Oesau, T., Jongsma, A., Innings, F., Heinrich, S.: Material Specific Drying Kinetics in Fluidized Bed Drying under Mechanical Vibration using the Reaction Engineering Approach Advanced Powder Technology, 31 (2020) 12, 4699-4713, DOI: 10.1016/j.apt.2020.11.006 Das, A., Kumar, J., Dosta, M., Heinrich, S.: On the Approximate Solution and Modeling of the Kernel of Nonlinear Breakage Population Balance Model SIAM Journal on Scientific Computing, 42(6), DOI: 10.1137/19M1301266 Wytrwat, T., Yazdanpanah, M., Heinrich, S.: Bubble Properties in Bubbling and Turbulent Fluidized Beds for Particles of Geldart’s Group B Processes, 2020, 8(9), 1098, DOI: 10.3390/pr8091098 Grohn, P., Lawall, M., Oesau, T., Heinrich, S., Antonyuk, S.: CFD-DEM simulation of a coating process in a fluidized bed rotor granulator Processes, 2020, 8(9), 1090, DOI: 10.3390/pr8091090 Haus, J., Lindmüller, L., Dymala, T., Jarolin, K., Feng, Y., Hartge, E.-U., Heinrich, S., Werther, J.: Increasing the efficiency of chemical looping combustion of biomass by a dual-stage fuel reactor design to reduce carbon capture costs Mitigation and Adaptation Strategies for Global Change, 2020, DOI: 10.1007/s11027-020-09917-2 Wytrwat, T., Hartge, E.-U., Yazdanpanah, M., Heinrich, S.: Influences on the transition from bubbling to turbulent fluidization for Geldart's group B particles Powder Technology, 375 (2020), DOI: 10.1016/j.powtec.2020.07.086 Skorych, V., Dosta, M., Heinrich, S.: Dyssol – an open-source flowsheet simulation framework for particulate materials SoftwareX, Volume 12 (2020), 100572, DOI: 10.1016/j.softx.2020.100572 Teiwes, A., Dosta, M., Jacob, M., Heinrich, S.: Pulsed multiphase flows – Numerical investigation of particle dynamics in pulsating gas-solid flows at elevated temperatures Processes, 2020, 8(7), 815, DOI: 10.3390/pr8070815 Gil-Chávez, J., Padhi, S.S.P., Hartge, E.-U., Heinrich, S., Smirnova, I.: Optimization of the spray-drying process for developing aquasolv lignin particles using response surface methodology Advanced Powder Technology, 31 (2020) 6, 2348-2356, DOI: 10.1016/j.apt.2020.03.027 Rothberg, H. S., Pietsch, S., Schneider, G. A., Heinrich, S.: Fabrication of Highly Filled Composites with an Innovative Miniaturized Spouted Bed Processes, 2020, 8(5), 521, DOI: 10.3390/pr8050521 Grohn, P., Weis, D., Thommes, M., Heinrich, S., Antonyuk, S.: Contact Behavior of Microcrystalline Cellulose Pellets Depending on their Water Content Chemical Engineering Technology, 2020, 43, No. 5, 887–895, DOI: 10.1002/ceat.201900517 Dosta, M., Furlan, K. P., Skorych, V., Heinrich, S., Janssen, R.: Influence of pores arrangement on stability of photonic structures during sintering Journal of the European Ceramic Society, 2020, 40, 4562–4571, DOI: 10.1016/j.jeurceramsoc.2020.04.019 Pietsch, S., Schönherr, M., Kleine Jäger, F., Heinrich, S.: Measurement of Residence Time Distributions in a Continuously Operated Spouted Bed Chemical Engineering Technology, 2020, 43, No. 5, 804–812, DOI: 10.1002/ceat.201900453 Kieckhefen, P., Pietsch, S., Dosta, M., Heinrich, S.: Possibilities and Limits of Computational Fluid Dynamics–Discrete Element Method Simulations in Process Engineering: A Review of Recent Advancements and Future Trends Annual Review of Chemical and Biomolecular Engineering, 11:10.1–10.26, 2020, DOI: 10.1146/annurev-chembioeng-110519-075414 Wang, S., Song, T., Yin, S., Hartge, E.-U., Dymala, T., Shen, L., Heinrich, S., Werther, J.: Syngas, tar and char behavior in chemical looping gasification of sawdust pellet in fluidized bed Fuel, 270 (2020), 117464, DOI: 10.1016/j.fuel.2020.117464 Dosta, M., Litster, J. D., Heinrich, S.: Flowsheet simulation of solids processes: Current status and future trends Advanced Powder Technology, 31 (2020), 947-953, DOI: 10.1016/j.apt.2019.12.015 Peshev, D., Eichner, E., Goslinska, M., Pietsch, S., Trambabova, Y., Terzieva, T., Georgieva, N., Heinrich, S.: Particle formulation of hydroalcoholic rosemary (Rosmarinus officinalis L.) extracts using a spouted bed Particuology, 51 (2020), 26-34, DOI: 10.1016/j.partic.2019.10.002
2019	Flach, F., Fries, L., Kammerhofer, J., Hesselbach, J., Finke, B., Schilde, C., Niederreiter, G., Palzer, P., Heinrich, S., Kwade, A.: Optimization of aqueous microgrinding processes for fibrous plant materials Advanced Powder Technology, 30 (2019) 11, 2823-2831, DOI: 10.1016/j.apt.2019.08.029 Buck, B., Heinrich, S.: Collision dynamics of wet particles: Comparison of literature models to new experiments Advanced Powder Technology, 30 (2019) 12, 3241-3252, DOI: 10.1016/j.apt.2019.09.033 Lehmann, S. E., Hartge, E.-U., Jongsma, A., deLeeuw, I.-M., Innings, F., Heinrich, S.: Fluidization characteristics of cohesive powders in vibrated fluidized bed drying at low vibration frequencies Powder Technology, 357 (2019), 54-63, DOI: 10.1016/j.powtec.2019.08.105 Pietsch, S., Kieckhefen, P., Müller, M., Schönherr, M., Kleine Jäger, F., Heinrich, S.: Influence of binary and ternary particle systems on the spouting stability in a three-dimensional prismatic spouted bed Powder Technology, 357 (2019), 305-312, DOI: 10.1016/j.powtec.2019.08.065 Goslinska, M., Heinrich, S.: Characterization of waxes as possible coating material for organic aerogels Powder Technology, 357 (2019), 223-231, DOI: 10.1016/j.powtec.2019.08.096 Skorych, V., Das, N., Dosta, M., Kumar, J., Heinrich, S.: Application of Transformation Matrices to the Solution of Population Balance Equations Processes 2019, 7(8), 535, DOI: 10.3390/pr7080535 Pietsch, S., Peter, A., Wahl, P., Khinast, J., Heinrich, S.: Measurement of granule layer thickness in a spouted bed coating process via optical coherence tomography Powder Technology, 356 (2019), 139-147, DOI: 10.1016/j.powtec.2019.08.022 Diez, E., Kieckhefen, P., Meyer, K., Bück, A., Tsotsas, E., Heinrich, S.: Particle dynamics in a multi-staged fluidized bed: Particle transport behavior on micro-scale by discrete particle modelling Advanced Powder Technology, 30 (2019) 10, 2014-2031, DOI: 10.1016/j.apt.2019.05.025 Neugebauer, C., Diez, E., Bück, A., Palis, S., Heinrich, S., Kienle, A.: On the dynamics and control of continuous fluidized bed layering granulation with screen-mill-cycle Powder Technology, 354 (2019), 765-778, DOI: 10.1016/j.powtec.2019.05.030 Lichtenegger, T., Kieckhefen, P., Heinrich, S., Pirker, S.: Dynamics and long-time behavior of gas-solid flows on recurrent-transient backgrounds Chemical Engineering Journal, 364 (2019), 562-577, DOI: 10.1016/j.cej.2019.01.161 Haus, J., Goltzsche, M., Hartge, E.-U., Heinrich, S., Werther, J.: Gasification kinetics of lignite char in a fluidized bed of reactive oxygen carrier particles Fuel, 236 (2019), 166-178, DOI: 10.1016/j.fuel.2018.08.151 Depta, P.N., Jandt, U., Dosta, M., Zeng, A.-P., Heinrich, S.: Toward Multiscale Modeling of Proteins and Bioagglomerates: An Orientation-Sensitive Diffusion Model for the Integration of Molecular Dynamics and the Discrete Element Method J. Chem. Inf. Model, 59 (2019) 1, 386-398, DOI: 10.1021/acs.jcim.8b00613 Skorych, V., Dosta, M., Hartge, E.-U., Heinrich, S., Ahrens, R., Le Borne, S.: Investigation of an FFT-based solver applied to dynamic flowsheet simulation of agglomeration processes Advanced Powder Technology, 30 (2019) 3, 555-564, DOI: 10.1016/j.apt.2018.12.007 Eichner, E., Fischer, P.-K., Heinrich, S., Schneider, G.A.: Production of composites with high relative permittivity using the spouted bed technique Particuology, 42 (2019), 184-189, DOI: 10.1016/j.partic.2018.03.006 Kieckhefen, P., Lichtenegger, T., Pietsch, S., Pirker, S., Heinrich, S.: Simulation of spray coating in a spouted bed using recurrence CFD Particuology, 42 (2019), 92-103, DOI: 10.1016/j.partic.2018.01.008 Pietsch, S., Poppinga, F.O., Heinrich, S., Müller, M., Schönherr, M., Kleine Jäger, F.: A novel method to quantify the coating progress in a three-dimensional prismatic spouted bed Particuology, 42 (2019), 137-145, DOI: 10.1016/j.partic.2018.01.013 Goslinska, M., Selmer, I., Kleemann, C., Kulozik, U., Smirnova, I., Heinrich, S.: Novel technique for measurement of coating layer thickness of fine and porous particles using focused ion beam Particuology, 42 (2019), 190-198, DOI: 10.1016/j.partic.2018.03.002
2018	Yin, S., Shen, L., Dosta, M., Hartge, E.-U., Heinrich, S., Lu, P., Werther, J., Song, T.: Chemical looping gasification of biomass pellet with a Manganese ore as oxygen carrier in the fluidized bed Energy & Fuels, 32 (2018) 11, 11674-11682, DOI: 10.1021/acs.energyfuels.8b02849 Diez, E., Meyer, K., Bück, A., Tsotsas, E., Heinrich, S.: Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process Chemical Engineering Research and Design, 139 (2018), 104-115, DOI: 10.1016/j.cherd.2018.09.032 Kammerhofer, J., Fries, L., Dymala, T., Dupas, J., Forny, L., Heinrich, S., Palzer, S.: Penetration rates into heterogeneous model systems and soluble food material Powder Technology, 339 (2018), 765-774, DOI: 10.1016/j.powtec.2018.08.068 Eichner, E., Heinrich, S., Schneider, G.A.: Influence of particle shape and size on mechanical properties in copper-polymer composites Powder Technology, 339 (2018), 39-45, DOI: 10.1016/j.powtec.2018.07.100 Pietsch, S., Kieckhefen, P., Müller, M., Schönherr, M., Kleine Jäger, F., Heinrich, S.: Novel production method of tracer particles for residence time measurements in gas-solid processes Powder Technology, 338 (2018), 1-6, DOI: 10.1016/j.powtec.2018.06.040 Dosta, M., Bröckel, U., Gilson, L., Kozhar, S., Auernhammer, G.K., Heinrich, S.: Application of micro computed tomography for adjustment of model parameters for discrete element method Chemical Engineering Research and Design, 135 (2018), 121-128, DOI: 10.1016/j.cherd.2018.05.030 Shang, G., Maiwald, L., Renner, H., Jalas, D., Dosta, M., Heinrich, S., Petrov, A., Eich, M.: Photonic glass for high contrast structural color Scientific Reports, 8 (2018), 7804, DOI: 10.1038/s41598-018-26119-8 Haus, J., Hartge, E.-U., Heinrich, S., Werther, J.: Dynamic flowsheet simulation for chemical looping combustion of methane International Journal of Greenhouse Gas Control, 72 (2018), 26-37, DOI: 10.1016/j.ijggc.2018.03.004 Kieckhefen, P., Pietsch, S., Höfert, M., Schönherr, M., Heinrich, S., Kleine Jäger, F.: Influence of gas inflow modelling on CFD-DEM simulations of three-dimensional prismatic spouted beds Powder Technology, 329 (2018), 167-180, DOI: 10.1016/j.powtec.2018.01.048 Kammerhofer, J., Fries, L., Dupas, J., Forny, L., Heinrich, S., Palzer, S.: Impact of hydrophobic surfaces on capillary wetting Powder Technology, 328 (2018), 367-374, DOI: 10.1016/j.powtec.2018.01.033 Buck, B., Lunewski, J., Tang, Y., Deen, N.G., Kuipers, J.A.M., Heinrich, S.: Numerical investigation of collision dynamics of wet particles via force balance Chemical Engineering Research and Design, 132 (2018), 1143-1159, DOI: 10.1016/j.cherd.2018.02.026 Pietsch, S., Kieckhefen, P., Heinrich, S., Müller, M., Schönherr, M., Kleine Jäger, F.: CFD-DEM modelling of circulation frequencies and residence times in a prismatic spouted bed Chemical Engineering Research and Design, 132 (2018), 1105-1116, DOI: 10.1016/j.cherd.2018.01.013 Song, T., Hartge, E.-U., Heinrich, S., Shen, L., Werther, J.: Chemical looping combustion of high sodium lignite in the fluidized bed: Combustion performance and sodium transfer International Journal of Greenhouse Gas Control, 70 (2018), 22-31, DOI: 10.1016/j.ijggc.2018.01.005 Saha, J., Kumar, J., Heinrich, S.: On the approximate solutions of fragmentation equations Proc. R. Soc. A, 474:20170541 (2018) 2209, DOI: 10.1098/rspa.2017.0541
2017	Tang, Y., Buck, B., Heinrich, S., Deen, N.G., Kuipers, J.A.M.: Interface‐resolved simulations of normal collisions of spheres on a wet surface AIChE Journal, Early View, (2017), DOI: 10.1002/aic.15847 McGuire, A.D., Lee, K.F., Dosta, M., Mosbach, S., Rosenboom, J.-G., Heinrich, S., Kraft, M.: Compartmental residence time estimation in batch granulators using a colourimetric image analysis algorithm and Discrete Element Modelling Advanced Powder Technology, 28 (2017) 9, 2239-2255, DOI: 10.1016/j.apt.2017.06.005 Weber, M., Spettl, A., Dosta, M., Heinrich, S., Schmidt, V.: Simulation-based investigation of core-shell agglomerates: Influence of spatial heterogeneity in particle sizes on breakage characteristics Computational Materials Science, 137 (2017), 100-106, DOI: 10.1016/j.commatsci.2017.05.014 Georgopanos, P., Eichner, E., Filiz, V., Handge, U.A., Schneider, G.A., Heinrich, S., Abetz, V.: Improvement of mechanical properties by a polydopamine interface in highly filled hierarchical composites of titanium dioxide particles and poly(vinyl butyral) Composites Science and Technology, 146 (2017), 73-82, DOI: 10.1016/j.compscitech.2017.04.017 Kaur, G., Kumar, J., Heinrich, S.: A weighted finite volume scheme for multivariate aggregation population balance equation Computers & Chemical Engineering, 101 (2017), 1-10, DOI: 10.1016/j.compchemeng.2017.02.011 Lee, K.F., Dosta, M., McGuire, A.D., Mosbach, S., Wagner, W., Heinrich, S., Kraft, M.: Development of a multi-compartment population balance model for high-shear wet granulation with discrete element method Computers & Chemical Engineering, 99 (2017), 171-184, DOI: 10.1016/j.compchemeng.2017.01.022 Spettl, A., Dosta, M., Klingner, F., Heinrich, S., Schmidt, V.: Copula-based approximation of particle breakage as link between DEM and PBM Computers & Chemical Engineering, 99 (2017), 158-170, DOI: 10.1016/j.compchemeng.2017.01.023 Haus, J., Hartge, E.-U., Heinrich, S., Werther, J.: Dynamic Flowsheet Simulation of Gas and Solids Flows in a System of Coupled Fluidized Bed Reactors for Chemical Looping Combustion Powder Technology, 316 (2017), 628-640, DOI: 10.1016/j.powtec.2016.12.022 Eichner, E., Salikov, V., Bassen, P., Heinrich, S., Schneider, G.A.: Using dilute spouting for fabrication of highly filled metal-polymer composite materials Powder Technology, 316 (2017), 426-433, DOI: 10.1016/j.powtec.2016.12.028 Pietsch, S., Heinrich, S., Karpinski, K., Müller, M., Schönherr, M., Kleine Jäger, F.: CFD-DEM modeling of a three-dimensional prismatic spouted bed Powder Technology, 316 (2017), 245-255, DOI: 10.1016/j.powtec.2016.12.046 Buck, B., Tang, Y., Heinrich, S., Deen, N.G., Kuipers, J.A.M.: Collision dynamics of wet solids: Rebound and rotation Powder Technology, 316 (2017), 218-224, DOI: 10.1016/j.powtec.2016.12.088 Skorych, V., Dosta, M., Hartge, E.-U., Heinrich, S.: Novel system for dynamic flowsheet simulation of solids processes Powder Technology, 314 (2017), 665-679, DOI: 10.1016/j.powtec.2017.01.061 Saha, J., Kumar, J., Heinrich, S.: A volume-consistent discrete formulation of particle breakage equation Computers and Chemical Engineering, 97 (2017), 147-160, DOI: 10.1016/j.compchemeng.2016.11.013 Neugebauer, C., Palis, S., Bück, A., Tsotsas, E., Heinrich, S., Kienle, A.: A dynamic two-zone model of continuous fluidized bed layering granulation with internal product classification Particuology, 31 (2017), 8-14, DOI: 10.1016/j.partic.2016.07.001 Eckhard, S., Fries, M., Antonyuk, S., Heinrich , S.: Dependencies between internal structure and mechanical properties of spray dried granules – Experimental study and DEM simulation Advanced Powder Technology, 28 (2017) 1, 185-196, DOI: 10.1016/j.apt.2016.09.008
2016	Neugebauer, C., Palis, S., Bück, A., Diez, E., Heinrich, S., Tsotsas, E., Kienle, A.: Influence of mill characteristics on stability of continuous layering granulation with external product classification Computer Aided Chemical Engineering, 38 (2016), 1275-1280, DOI: 10.1016/B978-0-444-63428-3.50217-4 Spettl, A., Bachstein, S., Dosta, M., Goslinska, M., Heinrich , S., Schmidt, V.: Bonded-particle extraction and stochastic modeling of internal agglomerate structures Advanced Powder Technology, 27 (2016) 4, 1761-1774, DOI: 10.1016/j.apt.2016.06.007 Aman, S., Mueller, P., Tomas, J., Kozhar, S., Dosta, M., Heinrich, S., Antonyuk, S.: Combined viscoelastic and elastic wave dissipation mechanism at low velocity impact Advanced Powder Technology, 27 (2016) 4, 1244-1250, DOI: 10.1016/j.apt.2016.04.012 Gonçalves, V.S.S., Gurikov, P., Poejo, J., Matias, A.A., Heinrich, S., Duarte, C.M.M., Smirnova, I.: Alginate-based hybrid aerogel microparticles for mucosal drug delivery European Journal of Pharmaceutics and Biopharmaceutics, 107 (2016), 160–170, DOI: 10.1016/j.ejpb.2016.07.003 Haus, J., Lyu, K., Hartge, E.-U., Heinrich, S., Werther, J.: Analysis of a Two-Stage Fuel Reactor System for the Chemical-Looping Combustion of Lignite and Bituminous Coal Energy Technology, 4 (2016), 1-12, DOI: 10.1002/ente.201600102 Dosta, M., Dale, S., Antonyuk, S., Wassgren, C., Heinrich, S., Litster, J.D.: Numerical and experimental analysis of influence of granule microstructure on its compression breakage Powder Technology, 299 (2016), 87–97, DOI: 10.1016/j.powtec.2016.05.005 Bück, A., Neugebauer, C., Meyer, K., Palis, S., Diez, E., Kienle, A., Heinrich, S., Tsotsas, E.: Influence of operation parameters on process stability in continuous fluidised bed layering with external product classification Powder Technology, 300 (2016), 37-45, DOI: 10.1016/j.powtec.2016.03.019 Porowska, A., Dosta, M., Fries, L., Gianfrancesco, A., Heinrich, S., Palzer, S.: Predicting the surface composition of a spray-dried particle by modelling component reorganization in a drying droplet Chemical Engineering Research and Design, 110 (2016), 131-140, DOI: 10.1016/j.cherd.2016.03.007 Crüger, B., Heinrich, S., Antonyuk, S., Deen, N.G., Kuipers, J.A.M.: Experimental study of oblique impact of particles on wet surfaces Chemical Engineering Research and Design, 110 (2016), 209–219, DOI: 10.1016/j.cherd.2016.01.024 Handge, U.A., Wolff, M.F.H., Abetz, V., Heinrich, S.: Viscoelastic and dielectric properties of composites of poly(vinyl butyral) and alumina particles with a high filling degree Polymer, 82 (2016), 337-348, DOI: 10.1016/j.polymer.2015.11.047 Sutkar, V.S., Deen, N.G., Patil, A.V., Salikov, V., Antonyuk, S., Heinrich, S., Kuipers, J.A.M.: CFD–DEM model for coupled heat and mass transfer in a spout fluidized bed with liquid injection Chemical Engineering Journal, 288 (2016), 185-197, DOI: 10.1016/j.cej.2015.11.044 Reinke, S.K., Wilde, F., Kozhar, S., Beckmann, F., Vieira, J., Heinrich, S., Palzer, S.: Synchrotron X-Ray microtomography reveals interior microstructure of multicomponent food materials such as chocolate Journal of Food Engineering, 174 (2016), 37-46, DOI: 10.1016/j.jfoodeng.2015.11.012 Crüger, B., Salikov, V., Heinrich, S., Antonyuk, S., Sutkar, V.S., Deen, N.G., Kuipers, J.A.M.: Coefficient of restitution for particles impacting on wet surfaces: An improved experimental approach Particuology, 25 (2016), 1-9, DOI: 10.1016/j.partic.2015.04.002 Besler, R., da Silva, M.R., Dosta, M., Heinrich, S., Janssen, R.: Discrete element simulation of metal ceramic composite materials with varying metal content Journal of the European Ceramic Society, 36 (2016) 9, 2245–2253, DOI: 10.1016/j.jeurceramsoc.2015.12.051
2015	Spettl, A., Dosta, M., Antonyuk, S., Heinrich, S., Schmidt, V.: Statistical investigation of agglomerate breakage based on combined stochastic microstructure modeling and DEM simulations Advanced Powder Technology, 26 (2015), 1021-1030, DOI: 10.1016/j.apt.2015.04.011 Reinke, S.K., Hauf, K., Vieira, J., Heinrich, S., Palzer, S.: Changes in contact angle providing evidence for surface alteration in multi-component solid foods Journal of Physics D: Applied Physics, 48 (2015), 464001, 1-15, DOI: 10.1088/0022-3727/48/46/464001 Reinke, S.K., Roth, S.V., Santoro, G., Vieira, J., Heinrich, S., Palzer, S.: Tracking Structural Changes in Lipid-based Multicomponent Food Materials due to Oil Migration by Microfocus Small-Angle X-ray Scattering ACS Applied Materials & Interfaces, 7 (2015) 18, 9929-9936, DOI: 10.1021/acsami.5b02092 Porowska, A., Dosta, M., Heinrich, S., Fries, L., Gianfrancesco, A., Palzer, S.: Influence of Feed Composition and Drying Parameters on the Surface Composition of a Spray-Dried Multicomponent Particle Drying Technology, 33:15-16 (2015), 1911-1919, DOI: 10.1080/07373937.2015.1069327 Kozhar, S., Dosta, M., Antonyuk, S., Heinrich, S., Bröckel, U.: DEM simulations of amorphous irregular shaped micrometer-sized titania agglomerates at compression Advanced Powder Technology, 26 (2015), 767-777, DOI: 10.1016/j.apt.2015.05.005 Besler, R., da Silva, M.R., do Rosario, J.J., Dosta, M., Heinrich, S., Janssen, R.: Sintering Simulation of Periodic Macro Porous Alumina Journal of the American Ceramic Society, 98 (2015) 11, 3496-3502, DOI: 10.1111/jace.13684 Antonyuk, S., Heinrich, S., Gurikov, P., Raman, S., Smirnova, I.: Influence of coating and wetting on the mechanical behaviour of highly porous cylindrical aerogel particles Powder Technology, 285 (2015), 34-43, DOI: 10.1016/j.powtec.2015.05.004 Selmer, I., Kleemann, C., Kulozik, U., Heinrich, S., Smirnova, I.: Development of egg white protein aerogels as new matrix material for microencapsulation in food The Journal of Supercritical Fluids, 106 (2015), 42-49, DOI: 10.1016/j.supflu.2015.05.023 Dreyschultze, C., Neugebauer, C., Palis, S., Bück, A., Tsotsas, E., Heinrich, S., Kienle, A.: Influence of zone formation on stability of continuous fluidized bed layering granulation with external product classification Particuology, 23 (2015), 1-7, DOI: 10.1016/j.partic.2015.02.004 Salikov, V., Heinrich, S., Antonyuk, S., Sutkar, V.S., Deen, N.G., Kuipers, J.A.M.: Investigations on the spouting stability in a prismatic spouted bed and apparatus optimization Advanced Powder Technology, 26 (2015), 718-733, DOI: 10.1016/j.apt.2015.02.011 Salikov, V., Antonyuk, S., Heinrich, S., Sutkar, V.S., Deen, N.G., Kuipers, J.A.M.: Characterization and CFD-DEM modelling of a prismatic spouted bed Powder Technol., 270 (2015), 622-636, DOI: 10.1016/j.powtec.2014.05.026 Sutkar, V.S., Deen, N.G., Salikov, V., Antonyuk, S., Heinrich, S., Kuipers, J.A.M.: Experimental and numerical investigations of a pseudo-2D spout ﬂuidized bed with draft plates Powder Technol., 270 (2015), 537-547, DOI: 10.1016/j.powtec.2013.11.030 Sutkar, V.S., Deen, N.G., Patil, A.V., Peters, E.A.J.F., Salikov, V., Antonyuk, S., Heinrich, S., Kuipers, J.A.M.: Experimental study of hydrodynamics and thermal behavior of a pseudo‐2D spout‐fluidized bed with liquid injection AIChE Journal, 61 (2015) 4, 1146-1159, DOI: 10.1002/aic.14719 Sutkar, V.S., Deen, N.G., Padding, J.T., Salikov, V., Crüger, B., Antonyuk, S., Heinrich, S., Kuipers, J.A.M.: A novel approach to determine wet restitution coefficients through a unified correlation and energy analysis AIChE Journal, 61 (2015) 3, 769-779, DOI: 10.1002/aic.14693 Rosenboom, J.G., Antonyuk, S., Heinrich, S., Kraft, M.: Characterisation of lactose powder and granules for multivariate wet granulation modelling Chem. Eng. Sci., 123 (2015), 395-405, DOI: 10.1016/j.ces.2014.11.013 Schnegas, S., Salikov, V., Antonyuk, S., Heinrich, S., Rajabi, N., Müller, J.: Fluid paths inside a spiral-shaped microchannel: a CFD study with discussion about possible Chinese hamster ovary cell trajectories Microfluid Nanofluid, 18 (2015), 685–694, DOI: 10.1007/s10404-014-1468-x
2014	Werther, J., Hartge, E.-U., Heinrich, S.: Fluidized-Bed Reactors – Status and Some Development Perspectives Chem.-Ing.-Tech., 86 (2014) 12, 2022-2038, DOI: 10.1002/cite.201400117 Eckhard, S., Fries, M., Teipel, U., Antonyuk, S., Heinrich S.: Modification of the mechanical granule properties via internal structure Powder Technol., 258 (2014), 252-264, DOI: 10.1016/j.powtec.2014.03.016 Narni, N.R., Peglow, M., Warnecke, G., Kumar, J., Heinrich, S., Kuipers, J.A.M.: Modeling of aggregation kernels for ﬂuidized beds using discrete particle model simulations Particuology, 13 (2014), 134-144, DOI: 10.1016/j.partic.2013.03.007 Thon, A., Kramp, M., Hartge, E.-U., Heinrich, S., Werther J.: Operational experience with a system of coupled ﬂuidized beds for chemical looping combustion of solid fuels using ilmenite as oxygen carrier Applied Energy, 118 (2014), 309-317, DOI: 10.1016/j.apenergy.2013.11.023 Fries, L., Antonyuk, S., Heinrich, S., Niederreiter, G., Palzer, S.: Product design based on discrete particle modeling of a ﬂuidized bed granulator Particuology, 12 (2014), 13-24, DOI: 10.1016/j.partic.2013.10.004 Franck, M., Hartge, E.-U., Heinrich, S., Werther, J.: Lignin pyrolysis in a circulating fluidised bed - influence of temperature and char holdup on product distribution IEA Bioenergy Agreement Task 34 Newsletter – PyNe 35 (2014), 10-13 Dosta, M.., Antonyuk, S., Hartge, E.U., Heinrich, S.: Parameter estimation for the flowsheet simulation of solids processes Chem.-Ing.-Tech., 86 (2014), No. 7, 1-8, DOI: 10.1002/cite.201400021 Wolff, M.F.H., Salikov, V., Antonyuk, S., Heinrich, S. und Schneider, G.A.: Novel, highly-filled ceramic-polymer composites synthesized by a spouted bed spray granulation process Composite Science and Technology, 90 (2014), 154-159, DOI: 10.1016/j.compscitech.2013.11.006 Wolff, M.F.H., Antonyuk, S., Heinrich, S. und Schneider, G.A.: Attritor-milling of poly(amide imide) suspensions Particuology 17 (2014), 92-96, DOI: 10.1016/j.partic.2013.11.005 Gilson, L., Kozhar, S., Antonyuk, S., Bröckel, U. und Heinrich, S.: Contact models based on experimental characterization of irregular shaped, micrometer-sized particles Granular Matter, 16 (2014) 3, 313-326, DOI: 10.1007/s10035-013-0464-2
2013	Heinrich, S.: Neue Entwicklungen in der Partikel‐ und Wirbelschichttechnik Chemie Ingenieur Technik, 85 (2013) 3, 215, DOI: 10.1002/cite.201390013 Sutkar, V., Deen, N.G., Mohan, B., Salikov, V., Antonyuk, S., Heinrich, S., Kuipers, J.A.M.: Numerical investigations of a pseudo-2D spout fluidized bed with draft plates using a scaled discrete particle model Chem. Eng. Sci., 104 (2013), 790-807, DOI: 10.1016/j.ces.2013.10.005 Sutkar, V.S., van Husel, T.J.K., Deen, N.G., Salikov, V., Antonyuk, S., Heinrich, S., Kuipers, J.A.M.: Experimental investigations of a pseudo 2D spout fluidized bed with draft plates Chem. Eng. Sci., 102 (2013), 524–543, DOI: 10.1016/j.ces.2013.08.046 Brandt, K., Wolff, M., Salikov, V., Heinrich, S., Schneider, G.A.: A novel method for a multi-level hierarchical composite with brick-and-mortar structure Scientific Reports, 3 (2013) 2322, DOI: 10.1038/srep02322 Wolff, M., Salikov. V., Antonyuk, S., Heinrich, S., Schneider, G.A.: Three-dimensional discrete element modeling of micromechanical bending tests of ceramic–polymer composite materials Powder Technol., 248 (2013), 77-83, DOI: 10.1016/j.powtec.2013.07.009 Dosta, M., Antonyuk, S., Heinrich, S.: Multiscale Simulation of Agglomerate Breakage in Fluidized Beds Ind. Eng. Chem. Res., 52 (2013), 11275-11281, DOI: 10.1021/ie400244x Schnegas, S., Antonyuk, S., Heinrich, S.: 3D modeling and Computational Fluid Dynamics simulations of surface-attached CHO-K1 cells going to detach from a microchannel wall Powder Technol., 237 (2013), 529-536, DOI: 10.1016/j.powtec.2012.12.042 Heine, M., Antonyuk, S., Fries, L., Niederreiter, Gerhard., Heinrich, S., Palzer, S.: Modeling of the Spray Zone for Particle Wetting in a Fluidized Bed Chem.-Ing.-Tech., 85 (2013) 3, 280-289, DOI: 10.1002/cite.201200148 Alaathar, I., Hartge, E.-U., Heinrich, S., Werther, J.: Modeling and flowsheet simulation of continuous fluidized bed dryers Powder Technol., 238 (2013), 132-141, DOI: 10.1016/j.powtec.2012.03.048 Dopfer, D., Palzer, S., Heinrich, S., Fries, L., Antonyuk, S., Haider, C., Salman, A.D.: Adhesion mechanisms between water soluble particles Powder Technol., 283 (2013), 35-49, DOI: 10.1016/j.powtec.2012.06.029 Chen, C., Werther, J., Heinrich, S., Qi, H.-Y., Hartge, E.-U.: CPFD simulation of circulating fluidized bed risers Powder Technol., 235 (2013), 238-247, DOI: 10.1016/j.powtec.2012.10.014 Fries, L., Antonyuk, S., Heinrich, S., Dopfer, D., Palzer, S.: Collision dynamics in fluidized bed granulators: A DEM-CFD study Chem. Eng. Sci., 86 (2013), 108-123, DOI: 10.1016/j.ces.2012.06.026 Neuwirth, J., Antonyuk, S., Heinrich, S., Jacob, M.: CFD-DEM study and direct measurement of the granular flow in a rotor granulator Chem. Eng. Sci., 86 (2013), 151-163, DOI: 10.1016/j.ces.2012.07.005
2012	Antonyuk, S., Heinrich, S., Smirnova, I.: Discrete Element Study of Aerogel Particle Dynamics in a Spouted Bed Apparatus Chem. Eng. & Tech., 35 (2012) 8, 1427-1434, DOI: 10.1002/ceat.201200083 Dosta, M., Antonyuk, S., Heinrich, S.: Multiscale simulation of fluidized bed granulation process Chem.-Ing.-Tech., 35 (2012) 8, 1373-1380, DOI: 10.1002/ceat.201200075 Salikov, V., Antonyuk, S., Heinrich, S.: Using DPM on the way to tailored prismatic spouted beds Chem.-Ing.-Tech., 84 (2012) , 388-394, DOI: 10.1002/cite.201100203 Alnaif, M., Antonyuk, S., Hentzschel, C.M., Leopold, C.S., Heinrich, S., Smirnova, I.: A Novel Process for Coating of Silica Aerogel Microspheres for Controlled Drug Release Applications Microporous and Mesoporous Materials, 160 (2012), 167-173, DOI: 10.1016/j.micromeso.2012.02.009 Jain, D., Deen, N.G., Kuipers, J.A.M., Antonyuk, S., Heinrich, S.: Direct numerical simulation of particle impact on thin liquid films using a combined volume of fluid and immersed boundary method Chem. Eng. Sci., 69 (2012) 1, 530-540, DOI: 10.1016/j.ces.2011.11.018 Kramp, M., Thon, A., Hartge, E.-U., Heinrich, S., Werther, J.: Carbon Stripping – A Critical Process Step in the Chemical Looping Combustion of Solid Fuels Chem. Eng. Technol., 35 (2012) 3, 497-507, DOI: 0.1002/ceat.201100438
2011	Brandt, K., Salikov, V., Oezcoban, H., Schreyer, A., Prado, L.A.S.A., Schulte, K., Heinrich, S., Schneider, G.A.: Novel ceramic-polymer composites synthesized by compaction of polymer-encapsulated TiO₂-nanoparticles Comp. Sci. and Tech., 72 (2011) 1, 65-71, DOI: 10.1016/j.compscitech.2011.10.001 Fries, L., Dosta, M., Antonyuk, S., Heinrich, S., Palzer, S.: Moisture Distribution in Fluidized Beds with Liquid Injection Chem. Eng. & Tech., 34 (2011) 7, 1076-1084, DOI: 10.1002/ceat.201100132 Thon, A., Püttmann, A., Hartge, E.-U., Heinrich, S., Werther, J., Patience, G. S., Bockrath, R. E.: Simulation of catalyst loss from an industrial fluidized bed reactor on the basis of labscale attrition tests Powder Technol., 214 (2011) 1, 21-30, DOI: 10.1016/j.powtec.2011.07.017 Kramp, M., Thon, A., Hartge, E.-U., Heinrich, S., Werther, J.: The Role of Attrition and Solids Recovery in a Chemical Looping Combustion Process Oil & Gas Sci. and Technol. – Rev. D IFP Energies nouvelles, 66 (2011) 2, 277-290, DOI: 10.2516/ogst/2010035 Werther, J., Heinrich, S., Dosta, M., Hartge, E.-U.: The ultimate goal of modeling – Simulation of system and plant performance Particuology, 9 (2011) 4, 320-329, DOI: 10.1016/j.partic.2011.03.006 Fries, L., Antonyuk, S., Heinrich, S., Palzer, S.: DEM-CFD modeling of a fluidized bed spray granulator Chem. Eng. Sci., 66 (2011) 11, 2340-2355, DOI: 10.1016/j.ces.2011.02.038 Müller, P., Stasiak, M., Antonyuk, S., Tomas, J., Heinrich, S.: The normal and oblique impact of three types of wet granules Granular Matter, 13 (2011) 4, 455-463, DOI: 10.1007/s10035-011-0256-5 Müller, P., Antonyuk, S., Tomas, J., Heinrich, S.: Ermittlung der normalen und tangentialen Stoßzahl von Granulaten Chem.-Ing.-Tech., 83 (2011) 5, 638-642, DOI: 10.1002/cite.201000131 Müller, P., Horbach. S., Antonyuk, S., Heinrich, S., Tomas, J.: Untersuchung des schiefen Stoßes von drei charakteristischen Granulaten Chem.-Ing.-Tech., 83 (2011) 5, 612-617, DOI: 10.1002/cite.201000175 van Buijtenen, M.S., Börner, M., Deen, N.G., Heinrich, S., Antonyuk, S., Kuipers, J.A.M.: An experimental study of the effect of collision properties on spout fluidized bed dynamics Powder Technol., 206 (2011) 1-2, Special issue: 9th International Symposium on Agglomeration and 4th International Granulation Workshop, 2009, 139-148, DOI: 10.1016/j.powtec.2010.07.009 Antonyuk, S., Palis, S., Heinrich, S.: Breakage behaviour of agglomerates and crystals by static loading and impact Powder Technol., 206 (2011) 1-2, Special issue: 9th International Symposium on Agglomeration and 4th International Granulation Workshop, 2009, 88-98, DOI: 10.1016/j.powtec.2010.02.025
2010	Dosta, M., Heinrich, S., Werther, J.: Fluidized bed spray granulation: Analysis of the system behaviour by means of dynamic flowsheet simulation Powder Technol., 204 (2010) 1, 71-82, DOI: 10.1016/j.powtec.2010.07.018 Antonyuk, S., Heinrich, S., Tomas, J., Deen, N.G., van Buijtenen, M.S., Kuipers, J.A.M.: Energy absorption during compression and impact of dry elastic-plastic spherical granules Granular Matter, 12 (2010) 1, 15-47, DOI: 10.1007/s10035-009-0161-3
2009	Gryczka, O., Heinrich, S., Deen, N.G., van Sint Annaland, M., Kuipers, J.A.M., Jacob, M., Moerl, L.: Characterization and CFD-modeling of the hydrodynamics of a prismatic spouted bed apparatus Chem. Eng. Sci., 64 (2009) 14, 3352-3375, DOI: 10.1016/j.ces.2009.04.020 Mohs, G., Gryczka, O., Heinrich, S., Mörl, L.: Magnetic monitoring of a single particle in a prismatic spouted bed Chem. Eng. Sci., 64 (2009) 23, 4811-4825, DOI: 10.1016/j.ces.2009.08.025 Antonyuk, S., Heinrich, S., Deen, N.G., Kuipers, J.A.M.: Influence of liquid layers on energy absorption during particle impact Particuology, 7 (2009) 4, 245-259, DOI: 10.1016/j.partic.2009.04.006 Gryczka, O., Heinrich, S., Deen, N.G., Kuipers, J.A.M., Mörl, L.: Three-dimensional computational fluid dynamics modeling of a prismatic spouted bed Chem. Eng. Technol., 32 (2009) 3, 470-481, DOI: 10.1002/ceat.200800652 van Buijtenen, M.S., Deen, N.G., Heinrich, S., Antonyuk, S., Kuipers, J.A.M.: Discrete particle simulation study on the influence of the restitution coefficient on spout fluidized-bed dynamics Chem. Eng. Technol., 32 (2009) 3, 454-462, DOI: 10.1002/ceat.200800580 Heinrich, S., Werther, J.: New Developments in Fluidization Technology Chem. Eng. Technol., 32 (2009) 3, 337-337, DOI: 10.1002/ceat.200990008 Gryczka, O., Heinrich, S., Deen, N.G., van Sint Annaland, M., Kuipers, J.A.M., Mörl, L.: CFD modeling of a prismatic spouted bed with two adjustable gas inlets Can. J. Chem. Eng., 87 (2009) 2, April, 318-328, DOI: 10.1002/cjce.20143 van Buijtenen, M.S., Deen, N.G., Heinrich, S., Antonyuk, S., Kuipers, J.A.M.: A discrete element study of wet particle-particle interaction during granulation in a spout fluidized bed Can. J. Chem. Eng., 87 (2009) 2, April, 308-317, DOI: 10.1002/cjce.20144 Kumar, J., Warnecke, G., Peglow, M., Heinrich, S.: Comparison of numerical methods for solving population balance equations incorporating aggregation and breakage Powder Technol., 189 (2009) 2, 218-229, DOI: 10.1016/j.powtec.2008.04.014 Link, J.M., Godlieb, W., Tripp, P., Deen, N.G., Heinrich, S., Kuipers, J.A.M., Schönherr, M., Peglow, M.: Comparison of fibre optical measurements and discrete element simulations for the study of granulation in a spout fluidised bed Powder Technol., 189 (2009) 2, 202-217, DOI: 10.1016/j.powtec.2008.04.017
2008	Nagaiah, C., Warnecke, G., Heinrich, S., Peglow, M.: Three-dimensional numerical study of heat and mass transfer in fluidized beds with spray nozzle Comp. Chem. Eng. 32 (2008) 12, 2877-2890, DOI: 10.1016/j.compchemeng.2008.02.009 Kumar, J., Peglow, M., Warnecke, G., Heinrich, S.: The cell average technique for solving multi-dimensional aggregation population balance equations Comp. Chem. Eng., 32 (2008) 8, 1810-1830, DOI: 10.1016/j.compchemeng.2007.10.001 Gryczka, O., Heinrich, S., Miteva, V., Deen, N.G., Kuipers, J.A.M., Jacob, M., Mörl, L.: Characterization of the pneumatic behaviour of a novel spouted bed apparatus with two adjustable gas inlets Chem. Eng. Sci., 63 (2008) 3, 791-814, DOI: 10.1016/j.ces.2007.10.023 Kumar, J., Peglow, M., Warnecke, G., Heinrich, S.: An efficient numerical technique for solving population balance equation involving aggregation, breakage, growth and nucleation Powder Technol., 182 (2008) 1, 81-104, DOI: 10.1016/j.powtec.2007.05.028
2007	Peglow, M., Kumar, J., Hampel, R., Tsotsas, E., Heinrich, S.: Towards a complete population balance model for fluidized bed spray agglomeration Drying Technol., 25 (2007) 7, 1321-1329, DOI: 10.1080/07373930701438899 Brzic, D., Ahchieva, D., Peglow, M., Heinrich, S.: An experimental study of the partial oxidation of ethane to ethylene in a shallow fluidized bed reactor Journal of the Serbian Chemical Society, 72 (2007) 2, 183-192, DOI: 10.2298/JSC0702183B Gryczka, O., Heinrich, S., Miteva, V., Mörl, L.: Untersuchungen zur Pneumatik von Strahlschichtapparaten mit schlitzförmigem Gaseintritt Chem.-Ing.-Tech., 79 (2007) 4, 396-401, DOI: 10.1002/cite.200600161 Nagaiah, C., Warnecke, G., Heinrich, S., Peglow, M.: Numerical simulation of temperature and concentration distributions in fluidized beds with liquid injection Chem. Eng. Sci., 62 (2007) 6, 1567-1590, DOI: 10.1016/j.ces.2006.11.046 Hampel, R., Heinrich, S., Peglow, M., Mörl, L.: Modellierung und experimentelle Untersuchung der Wirbelschicht-Sprühgranulation im überhitzen Wasserdampf Chem.-Ing.-Tech., 79 (2007) 1-2, 82-90, DOI: 10.1002/cite.200600108 Peglow, M., Kumar, J., Heinrich, S., Warnecke, G., Tsotsas, E., Mörl, L., Wolf, B.: A generic population balance model for simultaneous agglomeration and drying in fluidized beds Chem. Eng. Sci., 62 (2007) 1-2, Special issue: Applications of fluidization, 513-532, DOI: 10.1016/j.ces.2006.09.042 Deshmukh, S.A.R.K., Heinrich, S., Mörl, L., van Sint Annaland, M., Kuipers, J.A.M.: Membrane assisted fluidized bed reactors: Potentials and hurdles Chem. Eng. Sci., 62 (2007) 1-2, Special issue: Applications of fluidization, 416-436, DOI: 10.1016/j.ces.2006.08.062
2006	Peuker, U.A., Heinrich, S., Petermann, M., Tallarek, U.: Junior professor in the procedure technique - An experience report Chemie Ingenieur Technik, 78 (2006) 6, 669-677, DOI: 10.1002/cite.200600003 Peglow, M., Heinrich, S., Tsotsas, E.: Towards a complete population balance model for fluidized bed spray granulation: Simultaneous drying and particle formation Glatt International Times, 22 (2006) June, 7-13 Nagaiah, C., Warnecke, G., Heinrich, S., Peglow, M.: Numerical computation of heat and mass transfer in fluidized beds with liquid injection Proceedings in Applied Mathematics and Mechanics (PAMM), Special Issue: GAMM Annual Meeting 2006 – Berlin, 6 (2006) 1, 753-754, DOI: 10.1002/pamm.200610357 Kumar, J., Peglow, M., Warnecke, G., Heinrich, S., Mörl, L.: A discretized model for tracer population balance equation: Improved accuracy and convergence Comp. Chem. Eng., 30 (2006), 1278-1292, DOI: 10.1016/j.compchemeng.2006.02.021 Radichkov, R., Müller, T., Kienle, A., Heinrich, S., Peglow, M., Mörl, L.: A numerical bifurcation analysis of continuous fluidized bed spray granulation with external product classification Chem. Eng. Proc., 45 (2006) 10, 826-837, DOI: 10.1016/j.cep.2006.02.003 Antonyuk, S., Tomas, J., Heinrich, S., Mörl, L.: Impact breakage of spherical granules: Experimental study and DEM simulation Chem. Eng. Proc., 45 (2006) 10, 838-856, DOI: 10.1016/j.cep.2005.12.005 Peglow, M., Kumar, J., Warnecke, G., Heinrich, S., Tsotsas, E., Mörl, L., Hounslow, M.: An improved discretized tracer mass distribution of Hounslow et al. AIChE J., 52 (2006) 4, 1326-1332, DOI: 10.1002/aic.10748 Kumar, J., Peglow, M., Warnecke, G., Heinrich, S., Mörl, L.: Improved accuracy and convergence of discretized population balance for aggregation: The cell avererage technique Chem. Eng. Sci., 61 (2006) 10, 3327-3342, DOI: 10.1016/j.ces.2005.12.014 Peglow, M., Kumar, J., Warnecke, G., Heinrich, S., Mörl, L.: A new technique to determine rate constants for growth and agglomeration with size- and time-dependent nuclei formation Chem. Eng. Sci., 61 (2006) 1, Special Issue: Advances in population balance modelling, 282-292, DOI: 10.1016/j.ces.2004.11.071
2005	Ahchieva, D., Peglow, M., Heinrich, S., Mörl, L., Wolff, T., Klose, F.: Oxidative dehydrogenation of ethane in a fluidized bed membrane reactor Applied Catalysis A: General, 296 (2005) 2, 176-185, DOI: 10.1016/j.apcata.2005.07.040 Brzic, D., Ahchieva, D., Piskova, E., Heinrich, S., Grbavcic, Z.: Hydrodynamics of shallow fluidized bed of coarse particles Chem. Eng. J., 114 (2005), 47-54, DOI: 10.1016/j.cej.2005.09.002 Antonyuk, S., Tomas, J., Heinrich, S., Mörl, L.: Breakage behaviour of spherical granulates by compression Chem. Eng. Sci., 60 (2005) 14, Special issue: Granulation across the length scales – 2nd International Workshop on Granulation, 4031-4044, DOI: 10.1016/j.ces.2005.02.038 Drechsler, J., Peglow, M., Heinrich, S., Ihlow, M., Mörl, L.: Investigating the dynamic behaviour of fluidized bed spray granulation processes applying numerical simulation tools Chem. Eng. Sci., 60 (2005) 14, Special issue: Granulation across the length scales – 2nd International Workshop on Granulation, 3817-3833, DOI: 10.1016/j.ces.2005.02.010 Antonyuk, S., Tomas, J., Heinrich, S., Mörl, L.: Micro-macro breakage behavior of elastic-plastic granulates by compression Chem. Eng. Technol., 28 (2005) 5, 623-629, DOI: 10.1002/ceat.200407060 Heinrich, S., Henneberg, M., Peglow, M., Drechsler, J., Mörl, L.: Fluidized bed spray granulation: Analysis of heat and mass transfers and dynamic particle populations Braz. J. Chem. Eng., 22 (2005) 2, 181-194, DOI: 10.1590/S0104-66322005000200004
2004	Rangelova, J., Mörl, L., Heinrich, S., Peters, R.: Zerfallsverhalten von Partikeln in Wirbelschichten - Anwendung eines konstanten oberflächenbezogenen Abriebskoeffizienten Chem.-Ing.-Tech., 76 (2004) 8, 1078-1086, DOI: 10.1002/cite.200400078 Antonyuk, S., Tomas, J., Heinrich, S., Mörl, L.: Bruchprozesse bei der Druckbeanspruchung von Granulaten Chem.-Ing.-Tech., 76 (2004) 3, 249-253, DOI: 10.1002/cite.200403328
2003	Ihlow, M., Drechsler, J., Peglow, M., Henneberg, M., Heinrich, S., Mörl, L.: Wirbelschichtsprühgranulation – Neuartige Simulationssoftware zur Berechnung der Partikelgrößenverteilung, der Temperaturen und Gasbeladungen Chem.-Ing.-Tech., 75 (2003) 12, 1852-1856, DOI: 10.1002/cite.200303259 Heinrich, S., Blumschein, J., Henneberg, M., Ihlow, M., Peglow, M., Mörl, L.: Study of dynamic multi-dimensional temperature and concentration distributions in liquid-sprayed fluidized beds Chem. Eng. Sci., 55 (2003) 23-24, 5135-5160, DOI: 10.1016/j.ces.2003.08.010 Henneberg, M., Heinrich, S., Ihlow, M., Mörl, L.: Fluidized bed air drying: Experimental study and model development Can. J. Chem. Eng., 81 (2003) April, 176-184, DOI: 10.1002/cjce.5450810202 Heinrich, S., Peglow, M., Ihlow, M., Mörl, L.: Particle population modeling in fluidized bed-spray granulation - Analysis of the steady-state and unsteady behavior Powder Technol., 130 (2003) 1-3, 154-161, DOI: 10.1016/S0032-5910(02)00259-0
2002	Heinrich, S., Peglow, M., Ihlow, M., Henneberg, M., Mörl, L.: Analysis of the start-up process in continuous fluidized bed spray granulation by population balance modelling Chem. Eng. Sci., 57 (2002) 20, 4369-4390, DOI: 10.1016/S0009-2509(02)00352-4 Rangelova, J., Mörl, L., Heinrich, S., Dalichau, J.: Decay behaviour of particles in a fluidized bed – Application of a mass-related attrition coefficient Chem. Eng. Technol., 25 (2002) 6, 639-646, DOI: 10.1002/1521-4125(200206)25:6<639::AID-CEAT639>3.0.CO;2-5 Heinrich, S., Ihlow, M., Henneberg, M., Krüger, G., Mörl, L.: An optimization model of the operating costs of a fluidized bed steam-drying plant Can. J. Chem. Eng., 80 (2002) April, 326-333, DOI: 10.1002/cjce.5450800221 Heinrich, S., Ihlow, M., Henneberg, M., Mörl, L., Machnow, E.: Studies of steam drying in a fluidized bed Drying Technol., 20 (2002) 1, 175-194, DOI: 10.1081/DRT-120001373 Heinrich, S., Peglow, M., Mörl, L.: Unsteady and steady state particle size distributions in batch and continuous fluidized bed granulation systems Chem. Eng. J., 6 (2002) 1-2, 223-231, DOI: 10.1016/S1385-8947(01)00293-5
2001	Rangelova, J., Dalichau, J., Heinrich, S., Mörl, L.: Zerfallsverhalten von Partikeln in Wirbelschichten - Anwendung eines konstanten massenbezogenen Abriebskoeffizienten Chem.-Ing.-Tech., 73 (2001) 9, 1124-1131, DOI: 10.1002/1522-2640(200109)73:9<1124::AID-CITE1124>3.0.CO;2-0 Ihlow, M., Heinrich, S., Henneberg, M., Peglow, M., Mörl, L.: The problems encountered when calculating the surface in fluidized beds sprayed with liquid Chem. Eng. Technol., 24 (2001) 9, 897-903, DOI: 10.1002/1521-4125(200109)24:9<897::AID-CEAT897>3.0.CO;2-A Machnow, E., Ihlow, M., Henneberg, M., Heinrich, S., Mörl, L.: Fluidized bed steam drying - Modeling und experimental studies Chem. Eng. Technol., 24 (2001) 9, 884-889, DOI: 10.1002/1521-4125(200109)24:9<884::AID-CEAT884>3.0.CO;2-Q Machnow, E., Ihlow, M., Henneberg, M., Heinrich, S., Mörl, L.: Wirbelschicht-Dampftrocknung – Modellierung und experimentelle Untersuchungen Chem.-Ing.-Tech., 73 (2001) 1/2, 68-73, DOI: 10.1002/1522-2640(200101)73:1/2<68::AID-CITE68>3.0.CO;2-9 Ihlow, M., Heinrich, S., Henneberg, M., Machnow, E., Mörl, L., Peglow, M.: Probleme bei der Flächenberechnung in flüssigkeitsbedüsten Wirbelschichten Chem.-Ing.-Tech., 73 (2001) 3, 197-202, DOI: 10.1002/1522-2640(200103)73:3<197::AID-CITE197>3.0.CO;2-%23
2000	Heinrich, S., Mörl, L., Woestheinrich, K., Schmidt, P.C.: Non-stationary drying kinetics in a batch pharmaceutical fluidized bed coating process Drying Technol., 18 (2000) 9, 2065-2090, DOI: 10.1080/07373930008917826
1999	Ihlow, M., Will, H., Mörl, L., Heinrich, S.: Schwefeldioxidentfernung aus Rauchgasen mittels flüssigkeitsbedüster Gas/Feststoff-Wirbelschichten Chem. Techn., 51 (1999) 5, 276-282. Heinrich, S., Mörl, L.: Fluidized bed spray granulation – A new model for the description of particle wetting and of temperature and concentration distribution Chem. Eng. Proc., 38 (1999) 4-6, 635-663, DOI: 10.1016/S0255-2701(99)00065-3 Heinrich, S., Mörl, L.: Description of the temperature, humidity and concentration distribution in gas-liquid-solid fluidised beds Revue Générale de Thermique – An international Journal of Thermal Sciences, 38 (1999), 142-146, DOI: 10.1016/S1290-0729(99)80051-9 Heinrich, S., Krüger, G., Mörl, L.: Modelling of the batch treatment of wet granular solids with superheated steam in fluidized beds Chem. Eng. Proc., 38 (1999) 2, 131-142, DOI: 10.1016/S0255-2701(98)00082-8 Heinrich, S., Mörl, L.: Description of the temperature, humidity and concentration distribution in gas-liquid-solid fluidized beds Chem. Eng. Technol., 22 (1999) 2, 118-122, DOI: 10.1002/(SICI)1521-4125(199902)22:2<118::AID-CEAT118>3.0.CO;2-0
1998	Heinrich, S., Mörl, L.: Temperatur- und Konzentrationsverteilung der Wirbelschicht-Sprühgranulation Chem.-Ing.-Tech., 70 (1998) 8, 976-979, DOI: 10.1002/cite.330700808

Computational Particle Mechanics - Volume 9, issue 6, November 2022

processes Volume 9, Issue 8

Dynamic Flowsheet Simulation of Solids Processes

Focus Issue Particle and Powder Technology of Chemical Engineering and Technology

Special Issue Advances in Particulate Spouted Beds of Particuology

Issue 85-3 of Chemie Ingenieur Technik

Refeered journal contributions

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998