Publications, Journals

2020

Steffen, C., Sellenschloh, K., Vollmer, M., Morlock, M.M., Heiland, M., Huber, G., Rendenbach, C.Biomechanical comparison of titanium miniplates versus a variety of CAD/CAM plates in mandibular reconstructionJMBBM (2020), 111, 104007: 1-7
Polster, V., Hube, R., Morlock, M.M.Gross Stem Taper Failure with Head Dissociation in a Very Active Patient with an Uncemented Femoral StemJBJS Case Connector (2020), 10(3):1-5
Morlock, M., Hube, R., Wassilew, G., Prange, F., Huber, G., Perka, C.Taper corrosion: a complication of total hip arthroplastyEFORT Open Rev 2020;5:776-784
Guttowski, D., Polster, V., Huber, G., Morlock, M.M., Püschel, K., Nüchtern, J.Comparative biomechanical in-vitro study of different modular total knee arthroplasty revision stems with bone defectsJournal of Arthroplasty (2020), 35(11): 3318-3325
Messer-Hannemann, P., Weyer, H., Campbell, G.M., Morlock, M.M.Time-dependent viscoelastic response of acetabular bone and implant seating during dynamic implantation of press-fit cupsMedical Engineering & Physics 81 (2020), Pages 68-76
Zobel, S.M., Morlock, M.M., Huber,G.Fatigue strength reduction of Ti-6Al-4V titanium alloy after contact with high-frequency cauterising instrumentsMedical Engineering and Physics 81 (2020) 58–67
Haschke, H., Falkenberg, A., Morlock, M., Huber, G.Do SiNx coatings bear the potential to reduce the risk of micromotion in modular taper junctions?Proc IMechE Part H: Journal of Engineering in Medicine (2020), 9(234):897-908
Grünherz, L., Prein, C., Winkler, T., Kirsch, M., Hopfner, U., Streichert, T., Clausen-Schaumann, H., Zustin, J., Kirchhof, K., Morlock, M.M., Machens, H.-G.,Schilling, A.F.Osteoidosis leads to altered differentiation and function of osteoclastsJ Cell Mol Med. 2020, 24(10):5665-5674
Ntalos, D., Huber, G., Sellenschloh, K., Saito, H., Püschel, K., Morlock, M.M., Frosch, K.H., Klatte, T.O.Ausriss von All-suture-Ankern verursacht geringere Knochenschäden und ist von der Kortikalisdicke abhängigArthroskopie (2020), Preisträgerarbeit, 5(33): 378-385
Bätz, J., Syrigos, S., Vorbeck, M., Prüch, E., Campbell, G., Morlock, M.The influence of broach design on bone friction and osseodensification in total hip arthroplastyClin Biomech (Bristol, Avon), 2020, 73:234-240
Bechstedt, M., Gustafson, J.A., Mell, S.P., Gührs, J., Morlock, M.M., Levine, B.R., Lundberg, H.J.Contact Conditions for Total Hip Head-Neck Modular Taper Junctions with Microgrooved Stem TapersJournal of Biomechanics (2020), Volume 103,109689:1-7
Lossau, T., Nickisch, H., Wissel, T., Bippus, R., Schmitt, H., Morlock, M., Grass, M.Learning metal artifact reduction in cardiac CT images with moving pacemakersMed Image Anal. (2020), 61:101655:1-14
Lützner, J., Günther, KP., Postler, A., Morlock, M.Metallionenfreisetzung nach Hüft- und Kniegelenkendoprothetik – Mechanismen, biologische Wirkungen und notwendige DiagnostikZeitschrift für Orthopädie und Unfallchirurgie (2020), 5(158):369-382
Grupp, T.M., Baxmann, M., Jansson, V., Windhagen, H., Heller, K.-D., Morlock, M.M., Knaebel H.-P.How to proceed with asymptomatic modular dual taper hip stems in the case of acetabular revisionMaterials (Basel). 2020 Mar 2;13(5):1098
Weiser, L., Sellenschloh, K., Püschel, K., Morlock, M.M., Viezens, L., Lehamnn, W., Huber, G.Reduced cement volume does not affect screw stability in augmented pedicle screwsEuropean Spine Journal (2020), 29:1297–1303
Auerswald, M., Messer-Hannemann, P., Sellenschloh, K., Wahlefeld, J., Püschel, K., Hirschfeld Araujo, S., Morlock, M.M., Huber, G.Lag-screw osteosynthesis in thoracolumbar pincer-fracturesGlobal Spine Journal (2020):1-10
Falkenberg, A., Dickinson, E.C., Morlock, M.M.Adapter sleeves are essential for ceramic heads in hip revision surgeryClinical Biomechanics (2020), 71:1–4
Falkenberg, A., Biller, S., Morlock, M., Huber, G.Micromotion at the head-stem taper junction of total hip prostheses is influenced by prosthesis design-, patient- and surgeon-related factorsJournal of Biomechanics (2020), 98:1-8
Steffen, C., Sellenschloh, K., Polster, V., Heyland, M., Vollmer, M., Morlock, M.M., Heiland, M., Huber, G., Redenbach, C.Biomechanical comparison of polylactide-based versus titanium miniplates in mandible reconstruction in vitroJournal of Stomatology, Oral and Maxillofacial Surgery (2020), 121(4):377-382

2019

Matar, H., Kay, E., Morlock, M., Board, T.The hammer: instrument of Thor (and orthopaedic surgeons)BMJ 2019; 367: l6648, 1-3
Lützner, J., Günther, KP., Postler, A., Morlock, M.Metal Ion Release after Hip and Knee Arthroplasty - Causes, Biological Effects and DiagnosticsZ Orthop Unfall (2020) 158(4): 369-382
Messer-Hannemann P., Campbell, G.M., Morlock, M.M.Deformation of acetabular press-fit cups: Influence of design and surgical factorsClin Biomech (Bristol, Avon) (2019), 69:96-103
Lamb, J.N., Baetz, J., Messer-Hannemann, P., Adekanmbi, I., van Duren, B.H., Redmond, A., West, R.M., Morlock, M.M., Pandit, H.G.A calcar collar is protective against early periprosthetic femoral fracture around cementless femoral components in primary total hip arthroplasty: a registry study with biomechanical validationBone Joint J (2019),101-B(7):779-786
Lossau Née Elss, T., Nickisch, H., Wissel, T., Bippus, R., Schmitt, H., Morlock, M., Grass, M.Motion Estimation and Correction in Cardiac CT Angiography Images using Convolutional Neural NetworksComput Med Imaging Graph (2019), 76:101640
Ntalos, D., Sellenschloh, K., Huber, G., Briem, D., Püschel, K., Morlock, M.M., Frosch, K.-H., Fensky, F., Klatte, T.O.Biomechanical analysis of conventional anchor revision after all-suture anchor pullout - a human cadaveric shoulder modelJ Shoulder Elbow Surg (2019), 28(12): 2433-2437
Ntalos, D., Sellenschloh, K., Huber, G., Briem, D., Püschel, K., Morlock, M.M., Frosch, K.-H., Fensky, F., Klatte, T.O.Conventional rotator cuff versus all-suture anchors - a biomechanical study focusing on the insertion angle in an unlimited cyclic modelPLoS One  (2019), 14(11):1-13
Haschke, H., Konow, T., Huber, G., Morlock, M.M.Influence of flexural rigidity on micromotion at the head-stem taper interface of modular hip prosthesesMed Eng Phys  (2019), 68:1-10
Dickinson, E.C., Sellenschloh, K., Morlock, M.M.Impact of stem taper damage on the fracture strength of ceramic heads with adapter sleevesClin Biomech (Bristol, Avon) (2019), 63:193-200
Messer-Hannemann, P., Bätz, J., Lampe, F., Klein, A., Püschel, K., Campbell, G.M., Morlock, M.The influence of cavity preparation and press-fit cup implantation on restoring the hip rotation centerClin Biomech (Bristol, Avon) (2019),  63:185-192
Bätz, J., Messer-Hannemann, P., Lampe, F., Klein, A., Püschel, K., Morlock, M.M., Campbell, G.M.Effect of cavity preparation and bone mineral density on bone-interface densification and bone-implant contact during press-fit implantation of hip stemsJ Orthop Res (2019), 37(7):1580-1589
Benignus, C., Morlock, M., Beckmann, J.Total hip arthroplasty in young patients : Bearings and custom-made prosthesesOrthopäde (2019), 48(4):292-299
Falkenberg, A., Drummen, P., Morlock, M.M., Huber, G.Determination of local micromotion at the stem-neck taper junction of a bi-modular total hip prosthesis designMed Eng Phys (2019), Volume 65: 31-38
Rendenbach, C., Steffen, C., Sellenschloh K, Heyland, M., Morlock, M.M., Toivonen, J., Moritz, N., Smeets, R., Heiland, M., Vallittu, P.K., Huber, G.Patient specific glass fiber reinforced composite versus titanium plate: A comparative biomechanical analysis under cyclic dynamic loadingJournal of the Mechanical Behavior of Biomedical Materials 91 (2019) 212–219
Lossau, T., Nickisch, H., Wissel, T., Bippus, R., Schmitt, H., Morlock, M., Grass, M.Motion artifact recognition and quantification in coronary CT angiography using convolutional neural networksMed Image Anal  (2019), 52:68-79
Pröve, P.-L., Jopp-van Well, E., Stanczus, B., Morlock, M.M., Herrmann, J., Groth, M., Säring, D., Auf der Mauer, M.Automated segmentation of the knee for age assessment in 3D MR images using convolutional neural networksInternational Journal of Legal Medicine (2019), 133(4):1191-1205

2018

Oberst, S., Baetz, J., Campbell, G., Lampe, F., Lai, J.C.S., Hoffmann, N., Morlock, M.Vibro-acoustic and nonlinear analysis of cadavric femoral bone impaction in cavity preparationsInternational Journal of Mechanical Sciences 144 (2018) 739–745
Foelkel, M. C., Herzog, V., Meier, M., Morlock, M.M.Influence of application parameters of ultrasonic-assisted bone instruments on the tear force of a substitute material for spinal dura materCurrent Directions in Biomedical Engineering 2018; 4(1): 611 – 614
Morlock, M.M., Dickinson, E.C., Günther, K.-P., Bünte, D., Polster, V.Head Taper Corrosion Causing Head Bottoming Out and Consecutive Gross Stem Taper Failure in Total Hip ArthroplastyJ Arthroplasty 2018; 33(11): 3581-3590
Loger, K., Lutter, G., Huenges, K., Frank, D., Groß, J., Cremer, J., Attmann, T., Morlock, M., Pokorny, S.Transcatheter mitral valve implantation: supra-annular and subvalvular fixation techniquesEuropean Journal of Cardio-Thoracic Surgery 54 (2018) 1013–1021
Dong, X.N., Lu, Y., Krause, M., Huber, G., Chevalier, Y., Leng, H., Maquer, G.Variogram-based evaluations of DXA correlate with vertebral strength, but do not enhance the prediction compared to aBMD aloneJournal of Biomechanics 77 (2018) 223–227
Kallinowski, F., Harder, F., Gutjahr, D., Raschidi, R., Silva, T.G., Vollmer, M., Nessel, R.Assessing the GRIP of Ventral Hernia Repair: How to Securely Fasten DIS Classified MeshesFrontiers in Surgery, Januar 2018, Volume 4, Article 78
Busch, J.D., Schröder, H., Sellenschloh, K., Adam, G., Ittrich, H., Huber, G.Test method for mechanical properties of implantable catheters according to DIN 10555-3Journal of the Mechanical Behavior of Biomedical Materials 82 (2018) 183–186
Weiser, L., Huber, G., Sellenschloh, K., Viezens, L., Püschel, K., Morlock, M.M., Lehmann, W.Time to augment?! Impact of cement augmentation on pedicle screw fixation strength depending on bone mineral densityEur Spine J. 2018 Aug;27(8): 1964-1971
Krull, A., Morlock, M.M., Bishop, N.E.Factors influencing taper failure of modular revision hip stemsMedical Engineering and Physics 54 (2018) 65–73
Krull, A., Morlock, M.M., Bishop, N.E.Maximizing the fixation strength of modular components by impaction without tissue damageBone Joint Res (2018);7: 196-204

2017

Morlock, M.M.Modularity in OrthopaedicsJ Trauma Orthopaedics Subspecialty Section (2017), 05(03): 60-62
Baxmann, M., Pfaff, A.M., Schilling, C., Grupp, T.M., Morlock, M.M.Biomechanical Evaluation of the Fatigue Performance, the Taper Corrosion and the Metal Ion Release of a Dual Taper Hip Prosthesis under Physiological Environmental ConditionsBiotribology 12 (2017) 1–7
Rendenbach, C., Sellenschloh, K., Gerbig, L., Morlock, M.M., Beck-Broichsitter, B., Smeets, R., Heiland, M., Huber, G., Hanken, H.CAD-CAM plates versus conventional fixation plates for primary mandibular reconstruction: A biomechanical in vitro analysisJournal of Cranio-Maxillo-Facial Surgery 45 (2017) 1878-1883
Buente, D., Bryant, M., Ward, M., Neville, A., Morlock, M., Huber, G.The taper corrosion pattern observed for one bi-modular stem design is related to geometry-determined taper mechanicsMedical Engineering and Physics 46 (2017) 79–88
Krull, A., Morlock, M.M., Bishop, N.E.The Influence of Contamination and Cleaning on the Strength of Modular Head Taper Fixation in Total Hip ArthroplastyArthroplasty 2017 Oct;32(10):3200-3205
Krull, A., Bishop, N.E., Steffen, N.M., Lampe, F., Püschel, K., Morlock, M.M.Influence of the compliance of a patient's body on the head taper fixation strength of modular hip implantsClin Biomech (Bristol, Avon). 2017 Apr 25;46:1-5
Reichl, M., Kueny, R.A., Danyali, R., Obid, P.,Übeyli, H., Püschel, K., Morlock, M.M., Huber, G., Niemeyer, T., Richter, A.Biomechanical Effects of a Dynamic Topping off Instrumentation in a Long Rigid Pedicle Screw ConstructClin Spine Surg. 2017 May;30(4):E440-E447
Pokorny, S., Huenges, K., Hansen, J.H., Schadow, Y., Fischer, G., Morlock, M.M., Cremer, J., Lutter, G.Off-pump mitral valved stent implantation: comparison of apical and subannular fixation techniquesEur J Cardiothorac Surg. 2017 Jan;51(1):112-118
Morlock, M.M.Mix & Matchmerete&friends Magazin, Sep 2017, S. 9
Weiser, L., Huber, G., Sellenschloh, K., Viezens, L., Püschel, K., Morlock, M.M., Lehmann, W.Insufficient stability of pedicle screws in osteoporotic vertebrae: biomechanical correlation of bone mineral density and pedicle screw fixation strengthEur Spine J. (2017) 26:2891–2897
Bryant, M.G., Buente, D., Oladokun, A., Ward, M., Huber, G., Morlock, M., Neville, A.Surface and subsurface changes as a result of tribocorrosion at the stem-neck interface of bi-modular prosthesisBiotribology 10 (2017) 1–16 
Gührs, J., Körner, M., Bechstedt, M., Krull, A., Morlock, M.M.Stem taper mismatch has a critical effect on ceramic head fracture risk in modular hip arthroplastyClin Biomech (Bristol, Avon). 2017 Jan;41:106-110
Morlock, M.M., Jäger, M.Endoprothetik des älteren Menschen
Biomaterialien, Implantatwahl, Verankerungstechnik
Der Orthopäde, 46(1), 4-17, 2017
Morlock,M., Bünte, D., Gührs, J. and Bishop, N.Corrosion of the Head-Stem Taper Junction - Are We on the Verge of an Epidemic?Review Article. HSS J. 2017 Feb;13(1):42-49
Nagel, K. Bishop, N., Schlegel, U., Püschel, K., Morlock, M.The influence of cement morphology parameters on the strength of the cement-bone interface in tibial tray fixationJoA, 32 (2017) 563-569
Pokorny, S., Huenges, K.,  Hansen, J.H.,  Schadow, Y., Fischer, G., Morlock, M.M., Cremer, J., Lutter, G.Off-pump mitral valved stent implantation: comparison of apical and sub-annular fixation techniquesEuropean Journal of Cardiothoracic Surgery (EJCTS) 51 (2017) 112–118
Obid P, Danyali R, Kueny R, Huber G, Reichl M, Richter A, Niemeyer T, Morlock M, Püschel K, Übeyli H.Hybrid Instrumentation in Lumbar Spinal Fusion: A Biomechanical Evaluation of Three Different Instrumentation TechniquesGlobal Spine J. 2017 Feb;7(1):47-53
Damm, N., Bishop, N.E., Morlock, M.M.The influence of trabecular bone quality and implantation direction on press-fit mechanicsJ Orthop Res. 2017, 224-233
Weiser, L., Nüchtern, J.V., Sellenschloh, K., Püschel, K., Morlock, M.M., Rueger, J.M., Hoffmann, M., Lehmann, W., Großterlinden, L.G.Acromioclavicular joint dislocations: coracoclavicular reconstruction with and without additional direct acromioclavicular repairKnee Surg Sports Traumatol Arthrosc (2017) 25:2025–2031

2016

Thomsen, F.S.L., Peña, J.A., Lu, Y., Huber, G., Morlock, M., Glüer, C-C., Delrieux, C.A.A new algorithm for estimating the rod volume fraction and the trabecular thickness from in vivo computed tomographyMed Phys. 2016 Dec;43(12):6598-607
Campbell, G.M., Tiwari, S., Picke, A.K., Hofbauer, C., Rauner, M., Morlock, M.M., Hofbauer, L.C., Glüer, C.C.Effects of insulin therapy on porosity, non-enzymatic glycation and mechanical competence in the bone of rats with type 2 diabetes mellitusBone 91 (2016) 186–193
Weiser, L., Dreimann, M., Huber, G., Sellenschloh, K., Püschel, K., Morlock, M.M., Rueger, J.M., Lehmann, W.Cement augmentation versus extended dorsal instrumentation in the treatment of osteoporotic vertebral fractures: a biomechanical comparisonBone Joint J. 2016 Aug;98-B(8):1099-105. PMID: 27482024
Haschke, H., Bishop, N., Witt, F., Eicke, Y., Morlock, M.Contamination of modular hip taper interfaces increases post-assembly interface seatingOrthopaedic Proceedings vol. 98-B no. SUPP 8 31 (2016)
Haschke, H., Jauch-Matt, S.Y., Sellenschloh, K., Huber, G., Morlock, M.M.Assembly force and taper angle difference influence the relative motion at the stem-neck interface of bi-modular hip prosthesesProc IMechE Part H: J Engineering in Medicine 2016, Vol. 230(7) 690–699 
Koper M., Mathijssen, N.M.C., Witt, F., Morlock, M.M., Vehmeijer, S.B.W.Clinical and Wear Analyses of 9 Large Metal-on-Metal Total Hip ProsthesesPLOS One. 2016 Oct 6;11(10):e0163438
Huber, G., Nagel, K., Skrzypiec, D.M., Klein, A., Püschel, K., Morlock, M.M.A description of spinal fatigue strengthJ Biomech.  49 (2016) 875–880
Morlock, M.M., Bünte, D., Ettema, H., Verheyen, C.C., Hamberg, Ã., Gilbert, J.Primary hip replacement stem taper fracture due to corrosion in 3 patientsActa Orthop., 2016; 87(2): 189–192
Skrzypiec, D.M., Nagel, K., Sellenschloh, K., Klein, A., Püschel, K., Morlock, M.M., Huber, G.Failure of the human lumbar motion-segments resulting from anterior shear fatigue loadingIndustrial Health 2016, 54, 308-314

2015

Damm, N., Morlock, M.M., Bishop, N.E.Friction coefficient and effective interference at the implant-bone interfaceJBM 48 (2015) 3517-3521, 2015
Weiser, L., Nüchtern, J.V., Sellenschloh, K., Püschel, K., Morlock, M.M., Rueger, J.M., Hoffmann, M., Lehmann, W., Großterlinden, L.G.Acromioclavicular joint dislocations: coracoclavicular reconstruction with and without additional direct acromioclavicular repairKnee Surg Sports Traumatol Arthrosc,  Published online: 19 December 2015
Kallinowski, F., Baumann, E., Harder, F., Siassi, M., Mahn, A., Vollmer, M., Morlock, M.M.Dynamic intermittent strain can rapidly impair ventral hernia repairJ Biomech. 48 (2015) 4026-4036
Bünte, D., Huber, G., Bishop, N., Morlock, M.Quantification of material loss from the neck piece taper junctions of a bimodular primary hip prosthesis. A retrieval study from 27 failed Rejuvenate bimodular hip arthroplastiesBone Joint J. 2015 Oct;97-B(10):1350-7
Witt, F., Gührs, J., Morlock, M.M., Bishop, N.E.Quantification of the Contact Area at the Head-Stem Taper Interface of Modular Hip ProsthesesPLOS ONE, 2015;10(8):e0135517. PMID: 26280914
Jauch, S.Y., Wallstabe, S., Sellenschloh, K., Rundt, D., Püschel, K., Morlock, M.M., Meenen, N.M., Huber, G.Biomechanical modelling of impact-related fracture characteristics and injury patterns of the cervical spine associated with riding accidentsClin Biomech (Bristol, Avon). 2015 Oct;30(8):795-801
Chang Liao, M.L., de Boer, T., Mutoh, H., Raad, N.S., Richter, C., Wagner, E., Downie, B.R., Unsöld, B., Arooj, I., Streckfuss-Bömeke K, Döker, S., Luther, S., Guan, K., Wagner, S., Lehnart, S.E., Maier, L.S., Stühmer, W.., Wettwer, E., van Veen, T.A., Morlock, M.M., Knöpfel, T., Zimmermann, W.H.Sensing Cardiac Electrical Activity With a Cardiac Myocyte Targeted Optogenetic Voltage IndicatorCirc Res. 2015 Aug 14;117(5):401-12  PMID: 26078285
Weiser, L., Ruppel, A.A., Nüchtern, J.V., Sellenschloh, K., Zeichen, J., Püschel, K., Morlock M.M., Lehmann, W.Extra- vs. intramedullary treatment of pertrochanteric fractures: a biomechanical in vitro study comparing dynamic hip screw and intramedullary nailArch Orthop Trauma Surg. 2015 Aug;135(8):1101-6, Epub 2015 Jun 9
Morlock, M.M.The taper disaster - how could it happen?Hip Int. 2015 Jul-Aug;25(4):339-46
Klein, A., Nagel, K., Gührs, J., Poodendaen, C., Püschel, K., Morlock, M.M., Huber, G.On the Relationship between Stature and Anthropometric Measurements of Lumbar VertebraeScience & Justice, 2015 Dec;55(6):383-7
Campbell, G.M., Tiwari, S., Hamann, C., Picke, A.-K., Rauner, M., Huber, G., Pena, J.A., Damm, T., Barkmann, R., Morlock, M.M., Hofbauer, L.C., Glüer, C.C.Effects of Parathyroid Hormone on Cortical Porosity, Non-enzymatic Glycation and Bone Tissue Mechanics in Rats with Type 2 Diabetes MellitusBone 2015 , Bone 82 (2016) 116–121

Gührs, J., Krull, A., Witt, F., Morlock, M.M.The influence of stem taper re-use upon the failure load of ceramic headsMed Eng Phys. 2015 Jun;37(6):545-52, Epub 2015 Apr 20
Weiser, L., Korecki, M.A., Sellenschloh, K., Fensky, F., Püschel, K., Morlock, M.M., Rueger, J.M., Lehmann, W.Interposition sleeve as treatment option for interprosthetic fractures of the femur: a biomechanical in vitro assessmentInt Orthop. 2015 Apr 26;. [Epub ahead of print] PMID: 25913266 [PubMed - as supplied by publisher]

Koper, M.C., Mathijssen, N.M.C., van Ravenswaay Claasen, H.H., Witt, F., Morlock, M.M., Vehmeijer, S.B.W.

Severe wear and pseudotumor formation due to taper mismatch in a total hip arthroplasty

JBJS Case Connect, 2015 Apr 08; 5 (2): e29, (accepted)

Reichl, M., Kueny, R.A., Danyali, R,. Obid, P., Übeyli, H., Püschel, K., Morlock, M.M., Huber, G., Niemeyer, T., Richter, A.Biomechanical Effects of a Dynamic Topping off Instrumentation in a Long Rigid Pedicle Screw ConstructJ Spinal Disord Tech. 2015 Jan 21 [Epub ahead of print]

2014

Weiser, L., Korecki, M.A., Sellenschloh, K., Fensky, F., Püschel, K., Morlock, M.M., Rueger, J.M., Lehmann, W.The role of inter-prosthetic distance, cortical thickness and bone mineral density in the development of inter-prosthetic fractures of the femur: a biomechanical cadaver studyBone Joint J. 2014 Oct;96-B(10):1378-84
Schlegel, U.J., Püschel, K., Morlock, M.M., Nagel, K.Effect of tibial tray design on cement morphology in total knee arthroplastyJ Orthop Surg Res. 2014 Nov 29;9:123
Maquer, G., Schwiedrzik, J., Huber, G., Morlock, M.M., Zysset, P.K.Compressive strength of elderly vertebrae is reduced by disc degeneration and additional flexionJ Mech Behav Biomed Mater. 2015 Feb;42:54-66, Epub 2014 Nov 11
Werner, P.H. Ettema, H.B., Witt, F., Morlock, M.M., Verheyen, C.C.Basic principles and uniform terminology for the head-neck junction in hip replacementHip Int. 2015 Mar-Apr;25(2):115-9, Epub 2014 Nov 1
Pokorny, S., Huenges, K., Engel, A., Gross, J., Frank, D., Morlock, M.M., Cremer, J., Lutter, G.In Vivo Quantification of the Apical Fixation Forces of Different Mitral Valved Stent Designs in the Beating HeartAnn Biomed Eng. 2015 May;43(5):1201-9, Epub 2014 Oct 29
Lu, Y., Engelke, K., Glueer, C., Morlock, M., Huber, G.The effect of in situ/in vivo 3D QCT image voxel size on the finite element model of human vertebral cancellous boneProc Inst Mech Eng H. 2014 Nov;228(11):1208-13
Morlock, M.M., Witt, F., Bishop, N., Behn, R., Dalla Pria, P., Barrow, R., Dymond, I.Wear of a composite ceramic head caused by liner fractureOrthopedics. 2014 Jul;37(7):e653-6
Krause, M., Soltau, M., Zimmermann, E.A., Hahn, M., Kornet, J., Hapfelmeier, A., Breer, S., Morlock, M., Wulff, B., Püschel, K., Glueer, C.C., Amling, M., Busse, B.Effects of long-term alendronate treatment on bone mineralisation, resorption parameters and biomechanics of single human vertebral trabeculaeEur Cell Mater. 2014 Sep 22;28:152-65
Lu, Y., Krause, M., Bishop, N., Sellenschloh, K., Glüer, C.C., Püschel, K., Amling, M., Morlock, M.M., Huber, GThe role of patient-mode high-resolution peripheral quantitative computed tomography indices in the prediction of failure strength of the elderly women's thoracic vertebral bodyOsteoporos Int. 2015 Jan;26(1):237-44, Epub 2014 Aug 19
Siassi, M., Mahn, A., Baumann, E., Vollmer, M., Huber, G., Morlock, M., Kallinowski, F.Development of a dynamic model for ventral hernia mesh repairLangenbecks Arch Surg. 2014 Oct;399(7):857-62, Epub 2014 Aug 21
Schlegel, U.J., Bishop, N.,E., Püschel, K., Morlock, M.M., Nagel, K.Comparison of different cement application techniques for tibial component fixation in TKAInt Orthop. 2015 Jan;39(1):47-54
Witt, F., Bosker, B.H., Bishop, N.E., Ettema, H.B., Verheyen, C.C., Morlock,  M.M.The Relation Between Titanium Taper Corrosion and Cobalt-Chromium Bearing Wear in Large-Head Metal-on-Metal Total Hip Prostheses: A Retrieval StudyJ Bone Joint Surg Am. 2014 Sep 17;96(18):e157
Koper, M.C., Mathijssen, N.M.C., van Ravenswaay Claasen, H.H., Witt, F., Morlock, M.M., Vehmeijer, S.B.W.Pseudotumor After Bilateral Ceramic-on-Metal Total Hip Arthroplasty  A Case ReportJBJS Case connector, Volume 4, Number 1, March 12, 2014
Kueny, R.A., Kolb, J.P., Lehmann, W., Püschel, K.,  Morlock, M.M., Huber, G.Influence of the Screw Augmentation Technique and a Diameter Increase on Pedicle Screw Fixation in the Osteoporotic Spine: Pullout versus Fatigue TestingEur Spine J. 2014 Oct;23(10):2196-202
Rupprecht, M., Schlickewei, C., Fensky, F., Morlock, M., Püschel, K., Rueger, J.M., Lehmann, W.Periprosthetic and interimplant femoral fractures : Biomechanical analysisUnfallchirurg. 2014 Jun 5;. German. PMID: 24893727
Pokorny, S., Huenges, K., Bähr, T., Hansen, J.H., Fischer, G., Gross, J., Morlock, M., Cremer, J., Lutter, G.Transapical mitral valved stent implantation: enhanced survival and decreased paravaluvlar leakagesInternational Journal of Cardiology, Epub 2014 Jun 19
Lu, Y., Maquer, G., Museyko, O., Püschel, K., Engelke, K., Zysset, P., Morlock, M., Huber, G.Finite element analyses of human vertebral bodies embedded in polymethylmethalcrylate or loaded via the hyperelastic intervertebral disc models provide equivalent predictions of experimental strengthJ Biomech. 2014 Apr 16;. [Epub ahead of print], PMID: 24818795 [PubMed - as supplied by publisher]
Lu, Y., Engelke, K., Püschel, K., Morlock, M.M., Huber, G.Influence of 3D QCT scan protocol on the QCT-based finite element models of human vertebral cancellous boneMed Eng Phys. 2014 May 31;. [Epub ahead of print] PMID: 24894031
Ivicsics, M.F., Bishop, N.E., Püschel, K., Morlock, M.M., Huber, G.Increase in facet joint loading after nucleotomy in the human lumbar spineJ Biomechanics 47 (2014) 1712-1717, 2014
Schlegel, U.J., Püschel, K., Morlock, M.M., Nagel, K.An in vitro comparison of tibial tray cementation using gun pressurization or pulsed lavageInt Orthop. (2014)38:967-971, 2014
Berteau, J.P., Mielke, G., Morlock, M.M., Huber, G.Morphological and biomechanical analyses of the subchondral mineralized zone in human sacral facet joints: Application to improved diagnosis of osteoarthritisClin Anat. 2015 May;28(4):538-44,  Epub 2015 Feb 26 
Pokorny, S., Heinig, A., Hettich, H., Bähr, T., Marczynski-Bühlow, M., Morlock, M.M., Sattler, B., Schöttler, J., Lutter, G.Transapical mitral valved stent implantation: computed tomographic evaluation of different prototype designsEuroIntervention. 2014 Aug 30. pii: 20131008-03. doi: 10.4244/EIJY14M08_14. [Epub ahead of print]
Bishop, N.E., Höhn, J.C., Rothstock, S., Damm, N.B., Morlock, M.M.The influence of bone damage on press-fit mechanicsJ Biomech. 2014 Jan 20;. [Epub ahead of print] PMID: 24503049 [PubMed - as supplied by publisher]
Winkler, T., Dai, X.Y., Mielke, G., Vogt, S., Buechner, H., Schantz, J.T., Harder, Y., Machens, H.G., Morlock, M.M., Schilling, A.F.Three-dimensional quantification of calcium salt-composite resorption (CSC) in vitro by micro-computed tomography (micro-CT)JOM, Vol. 66, No. 4, pp 559-565, 2014
Hamann, C., Picke, A.K., Campbell, G.M., Balyura, M., Rauner, M., Bernhardt, R., Huber, G., Morlock, M.M., Günther, K.P., Bornstein, S.R., Glüer, C.-C., Ludwig, B., Hofbauer, L.C.Effects of Parathyroid Hormone on Bone Mass, Bone Strength, and Bone Regeneration in Male Rats with Type 2 Diabetes MellitusEndocrinology, 2014 Apr;155(4):1197-206
Weiss, C., Morlock, M.M., Hoffmann, N.P.Friction induced dynamics of ball joints: instability and post bifurcation behaviorEuropean Journal of Mechanics A/Solids 45 (2014) 161-173

Nüchtern, J., V., Ruecker, A.H., Sellenschloh, K., Rupprecht, M., Pueschel, K., Rueger, J.M., Morlock, M.M., Lehmann, W.

Malpositioning of the lag-screws by one- or two-screw nailing systems for pertrochanteric femoral fractures: a biomechanical comparison of Gamma3 and Intertan

J Orthop Trauma, 2014 Mar 3 [Epub ahead of print]

2013

Glüer, C.C., , Krause, M., Museyko, O., Wulff, B.,  , Campbell, G.,  , Damm, T., Daugschies, M., Huber, G., Lu, Y., Peña, J., Waldhausen, S., Bastgen, J., Rohde, K., Breer, S., Steinebach, I., Thomsen, F., Amling, M., Barkmann, R., Engelke, K., Morlock, M., Pfeilschifter, J., Püschel, K.Neue Horizonte für die In-vivo-Bestimmung wesentlicher Aspekte der Knochenqualität ; Mikrostruktur und Materialeigenschaften, bestimmt mit Quantitativer Computertomografie und Quantitativen Ultraschallmethoden, entwickelt durch das BioAsset KonsortiumOsteologie 2013; Vol.22:223-233
Nagel, K., Klein, A., Püschel, K., Morlock, M., Huber, G.Dependence of spinal segment mechanics on load direction, age and genderResearch Project F2059, Federal Institute for Occupational Safety and Health, Dortmund/Berlin/Dresden, 2013
Fensky, F., Kueny, R.A., Sellenschloh, K., Püschel, K., Morlock, M.M., Rueger, J.M., Lehmann, W., Huber, G., Hansen-Algenstaedt, N.Biomechanical advantage of C1 pedicle screws over C1 lateral mass screws: a cadaveric studyEur Spine J. 2013 Dec 31. [Epub ahead of print] PMID: 24378628 [PubMed - as supplied by publisher]
Pokorny, S., Dai, H., Bähr, T., Huenges, K., Marczynski-Bühlow, M., Morlock, M.M., Cremer, J., Lutter, G.Transapical mitral valved stent implantation: comparison between circular and D-shaped designEuroIntervention. 2013 Nov 25;. [Epub ahead of print] PMID: 24273248 [PubMed - as supplied by publisher]
Ivicsics, M.F., Bishop, N.E., Sellenschloh, K., Berteau, J.P., Morlock, M.M., Huber, G.The effect of nucleotomy on facet joint loading - a porcine in vitro studyClin Biomech (Bristol, Avon). 2013 Oct; 28(8):853-9, 2013
Ivicsics, M.F., Bishop, N.E., Sellenschloh, K., Berteau, J.P., Morlock, M,M,, Huber, G.The effect of nucleotomy on facet joint loading in the porcine lumbar spineComput Methods Biomech Biomed Engin. 2013 Jul;16 Suppl 1:222-3
Höfemann, M., Berteau, J.P., Lu, Y.T., Morlock, M.M., Huber, G.Necessary precision levels for the subchondral mineralised zone thickness of the facet joint to optimise finite-element modelComput Methods Biomech Biomed Engin. 2013 Jul;16 Suppl 1:224-5
Berteau, J.P., Nover, L., Mielke, G., Ivicsics, M., Morlock, M.M., Huber, G.In vitro characterisation of the biomechanical properties of the subchondral mineralised zone of lumbosacral facet jointsComput Methods Biomech Biomed Engin. 2013 Jul;16 Suppl 1:226-7
Stemmer, P., Pourzal, R., Liao, Y., Marks, L., Morlock, M., Jacobs, J., Wimmer, M., Fischer, A.Microstructure of Retrievals Made from Standard Cast HC-CoCrMo AlloysASTM Metal-On-Metal Total Hip Replacement Devices, p 1-17, 2013
Lu, Y., Rosenau, E., Paetzold, H., Klein, A., Püschel, K., Morlock, M., Huber, G.Strain changes on the cortical shell of vertebral bodies due to spine ageing: A parametric study using a finite element model evaluated by strain measurementsProc Inst Mech Eng H. 2013 Aug 29;. [Epub ahead of print]Proc Inst Mech Eng H. 2013 Aug 29;. [Epub ahead of print]
Fan, N., Morlock, M.M., Bishop, N.E., Huber, G., Hoffmann, N., Ciavarella, M., Chen, G.X., Hothan, A., Witt, F.The influence of stem design on critical squeaking friction with ceramic bearingsJ Orthop Res. 2013 Jun 27;. [Epub ahead of print] PMID: 23813771 [PubMed - as supplied by publisher]
Hothan, A., Lewerenz, K., Weiss, C., Hoffmann, N., Morlock, M., Huber, G.Vibration transfer in the ball-stem contact interface of artificial hipsMed Eng Phys. 2013 May 23;. [Epub ahead of print]
Kolb, J.P., Kueny, R.A., Püschel, K., Boger, A., Rueger, J.M., Morlock, M.M., Huber, G., Lehmann, W.Does the cement stiffness affect fatigue fracture strength of vertebrae after cement augmentation in osteoporotic patients?Eur Spine J. 2013 May 16;. [Epub ahead of print]
Friesecke, Ch., Morlock, M.Myokaditis durch MetalloseHamburger Ärzteblatt 4, S. 28.-30, 2013
Nüchtern, J.V., Sellenschloh, K., Bishop, N., Jauch, S., Briem, D., Hoffmann, M., Lehmann, W., Pueschel, K., Morlock, M.M., Rueger, J.M., Großterlinden , L.G.Biomechanical Evaluation of 3 Stabilization Methods on Acromioclavicular Joint DislocationsAm J Sports Med. 2013 Apr 25; [Epub ahead of print]
Hannemann, F., Hartmann, A., Schmitt, J., Lützner, J., Seidler, A., Campbell, P., Delaunay, C.P., Drexler, H., Ettema, H.B., García-Cimbrelo, E., Huberti, H., Knahr, K., Kunze, J., Langton, D.J., Lauer, W., Learmonth, I., Lohmann, C.H., Morlock, M., Wimmer, M.A., Zagra, L., Günther, K.P.European multidisciplinary consensus statement on the use and monitoring of metal-on-metal bearings for total hip replacement and hip resurfacingOrthop Traumatol Surg Res. 2013 Mar 15. doi:pii: S1877-0568(13)00027-3. 10.1016/j.otsr.2013.01.005. [Epub ahead of print]
Rothstock, S., Saadatmand, M., Vollmer, M.,  Paech, A., Jürgens, C., Nassutt, R., Morlock, M.M.Influence of Cooling on Curing Temperature Distribution During Cementing of Modular Cobalt-Chromium and Monoblock Polyethylene Acetabular CupsSurgical Invovation, 2013
Jauch, S.Y., Huber, G., Sellenschloh, K., Haschke, H., Baxmann, M., Grupp, T.M., Morlock, M.M.Micromotions at the Taper Interface Between Stem and Neck Adapter of a Bimodular Hip Prosthesis During Activities of Daily LivingJoR, DOI: 10.1002/jor.22354, 2013
Fensky, F., Nüchtern, J.V., Kolb, J.P., Huber, S., Rupprecht, M., Jauch, S., Sellenschloh, K., Püschel, K., Morlock, M.M., Rueger, J.M., Lehmann, W.Cement augmentation of the Proximal Femoral Nail Antirotation for the treatment of osteoporotic pertrochanteric fractures - a biomechanical cadaver studyInjury, 2013 Jun;44(6):802-7, 2013
Günther, K,P,, Schmitt, J., Campbell, P., Delaunay, C.P., Drexler, H., Ettema, H.B., García-Cimbrelo, E., Hannemann, F., Hartmann, A., Huberti, H., Knahr, K., Kunze, J., Langton, D.J., Lauer, W., Learmonth, I., Lohmann, C.H., Lätzner, J., Morlock, M., Seidler, A., Wimmer, M.A., Zagra, L.Consensus statement "Current evidence on the management of metal-on-metal bearings"Hip Int. 2013 Feb 21;23(1):2-5
Hoenig, E., Leicht, U., Winkler, T., Mielke, G., Beck, K., Peters, F., Schilling, A.F., Morlock, M.M.Mechanical Properties of Native and Tissue-Engineered Cartilage depend on Carrier Permeability: A Bioreactor StudyTissue Eng Part A. 2013 Feb 7;. [Epub ahead of print]

Skrzypiec, D.M., Bishop, N.E., Klein, A., Püschel, K., Morlock, M.M., Huber, G.

Estimation of shear load sharing in moderately degenerated human lumbar spine

J Biomech. 2013 Jan 9;. [Epub ahead of print]

Bishop, N., Witt, F., Pourzal, R., Fischer, A., Rütschi, M., Michael, M., Morlock, M.Wear patterns of taper connections in retrieved large diameter metal-on-metal bearingsJ Orthop Res. 2013 Jul;31(7):1116-22,  Epub 2013 Feb 25

2012

Bishop, N.E., Hothan, A., Morlock, M.M.High friction moments in large hard-on-hard hip replace-ment bearings in conditions of poor lubrication J Orthop Res. 2013 May;31(5):807-13, Epub 2012 Dec 13
Lehmann, W., Rupprecht, M., Rücker, A.,  Hoffmann, M., Morlock, M., Püschel, K., Rueger, J.M.Interprothetische Frakturen am FemurTrauma Berufskrankh 2012 • 14:190–195, 2012
Rehmer, A., Bishop, N.E., Morlock, M.M.Influence of assembly procedure and material combination on the strength of the taper connection at the head-neck junction of modular hip endoprosthesesClin Biomech (Bristol, Avon), 2012 Jan;27(1): 77-83, 2012
Paetzold, H., Goepfert, C., Huber, G., Hoenig, E., Pörtner, R., Schilling, A.F., Meenen, N.M., Morlock, M.M.The development of the collagen fibre network in tissue-engineered cartilage constructs in vivo. Engineered cartilage reorganises fibre networkEur Cell Mater. 2012 Apr 5;23: 209-21, 2012
Krause, M., Breer, S., Hahn, M., Rüther, W., Morlock, M.M., Amling, M., Zustin, J.Cementation and interface analysis of early failure cases after hip-resurfacing arthroplastyInt Orthop. 2012 Jul;36(7): 1333-40, 2012
Lehmann, W., Rupprecht, M., Nuechtern, J., Melzner, D., Sellenschloh, K., Kolb, J., Fensky, F., Hoffmann, M., Püschel, K., Morlock, M., Rueger, J.M.What is the risk of stress risers for interprosthetic fractures of the femur? A biomechanical analysisInternational Orthopaedics, 2012 Dec; 36(12):2441-6, 2012
Gebert de Uhlenbrock, A., Püschel, V., Püschel, K., Morlock, M.M., Bishop, N.E.Influence of time in-situ and implant type on fixation strength of cemented tibial trays - A post mortem retrieval analysisClin Biomech (Bristol, Avon),07/2012;27(9): 929-35, 2012
Skrzypiec, D.M., Klein, A., Bishop, N.E., Stahmer, F., Püschel, K., Seidel, H., Morlock, M.M., Huber, G.Shear strength of the human lumbar spineClin Biomech (Bristol, Avon), 2012 Aug; 27(7): 646-51, 2012
Weiss, C., Hothan, A., Huber, G., Morlock, M.M., Hoffmann, N.P.Friction-induced whirl vibration: Root cause of squeaking in total hip arthroplastyJ Biomech. 45(2):297-303, 2012
Breer, S., Krause, M., Busse, B., Hahn, M., Rüther, W., Morlock, M.M., Amling, M., Zustin, J.Analysis of retrieved hip resurfacing arthroplasties reveals the interrelationship between interface hyperosteoidosis and demineralization of viable bone trabeculaeJ Orthop Res. 2012 Jul;30(7):1155-61, 2012

Krause M, Breer S, Hahn M, Rüther W, Morlock MM, Amling M, Zustin J.

Cementation and interface analysis of early failure cases after hip-resurfacing arthroplasty

Int Orthop. 2012 Jan 11. [Epub ahead of print]

2011

Jauch, S.Y., Huber, G., Hoenig, E., Baxmann, M., Grupp, T.M., Morlock, M.M.Influence of material coupling and assembly condition on the magnitude of micromotion at the stem-neck interface of a modular hip endoprosthesisJ Biomech. 44 (2011) 1747-1751, 2011
Morlock, M.M., Bishop, N., Kaddick, C.Welche Hüftgelenkgleitpaarung für welchen Patienten? Tribologie der Zukunft (“Which hip articulation bearing for which patient? Tribology of the futureDer Orthopäde 2011 Vol40(12):1061-1067, e-pub Nov 16.7, 2011
Morlock, M., Huber, G., Kaddick, Ch., Bishop, N.Welchen Beitrag kann die Schadensanalyse zur Qualitätssicherung leisten?Orthopädische Nachrichten 20.2011, DKOU Kongressausgabe 1, S.2, 2011
Hinsch, A., Vettorazzi, E., Morlock, M.M., Rüther, W., Amling, M., Zustin, J.Sex differences in the morphological failure patterns following hip resurfacing arthroplastyBMC Med. 2011 Oct 13;9(1):113. [Epub ahead of print]
Das, D., Zhang, Z., Winkler, T., Mour, M., Günter, C.I., Morlock, M.M., Machens, H.G., Schilling, A.F.Bioresorption and Degradation of BiomaterialsAdv Biochem Eng Biotechnol. 2011 Oct 6; [Epub ahead of print]
Gradl, G., Stedtfeld, H.W., Morlock, M., Sellenschloh, K., Püschel, K., Mittlmeier, T., Gradl, G.Locking plate fixation of humeral head fractures with a telescoping screw. A comparative biomechanical study versus a standard plateInjury. 2012 Jun;43(6): 734-8, Epub 2011 Sep 25
Morlock, M., Hothan, A., Weiss, C., Hoffmann, N.Noises originating from artificial hip replacements: where do they come from and how can they be prevented?Orthopädie im Profil, Nr. 2, S. 12-14, 2011
Rehmer, A., Bishop, N.E., Morlock, M.M.Influence of assembly procedure and material combination on the strength of the taper connection at the head-neck junction of modular hip endoprosthesesClin Biomech (Bristol, Avon). 2012 Jan; 27(1):77-83, Epub 2011 Sep 8, 2011
Rupprecht, M., Sellenschloh, K., Grossterlinden, L., Püschel, K., Morlock, M., Amling, M., Rueger, J.M., Lehmann, W.Biomechanical evaluation for mechanisms of periprosthetic femoral fracturesJ Trauma. 2011 Apr;70(4):E62-6, 2011
Riecke, B., Heiland, M., Hothan, A., Morlock, M., Amling, M., Blake, F.A.Primary implant stability after maxillary sinus augmentation with autogenous mesenchymal stem cells: a biomechanical evaluation in rabbitsClin Oral Implants Res. 2011 Nov;22(11):1242-6. EpubApr 19, 2011
Rothstock, S., Uhlenbrock, A., Bishop, N., Laird, L., Nassutt, R., Morlock, M.Influence of interface condition and implant design on bone remodelling and failure risk for the resurfaced femoral headJ Biomech. 44(9):1646-1653, 2011
Morlock, M., Bishop, N.Zur Biomechanik von KurzschaftprothesenOrthopädie im Profil, Nr. 1, S. 10-11, 2011
Hothan, A., Huber, G., Weiss, C., Hoffmann, N., Morlock, M.The influence of component design, bearing clearance and axial load on the squeaking characteristics of ceramic hip articulationsJ Biomech. 44(5):837-41. Epub 2011 Feb 4
Rupprecht, M., Grossterlinden, L., Ruecker, A.H., de Oliveira, A.N., Sellenschloh, K., Nüchtern, J., Püschel, K., Morlock, M., Rueger, J.M., Lehmann, W.A Comparative Biomechanical Analysis of Fixation Devices for Unstable Femoral Neck Fractures: The Intertan Versus Cannulated Screws or a Dynamic Hip ScrewJ Trauma. 2011 Sep;71(3):625-34, 2011
Rupprecht, M., Grossterlinden, L., Sellenschloh, K., Hoffmann, M., Püschel, K., Morlock, M., Rueger, J.M., Lehmann, W.Internal fixation of femoral neck fractures with posterior comminution: A biomechanical comparison of DHS® and Intertan nail®Int Orthop. 2011 Feb 1. [Epub ahead of print]

Hoenig, E., Winkler, T., Goepfert, C., Mielke, G., Paetzold, H., Schuettler, D., Machens, H.G., Morlock, M.M., Schilling, A.F.

High amplitude direct compressive strain enhances mechanical properties of scaffold-free tissue-engineered cartilage

Tissue Eng Part A. 2011 Feb 27. [Epub ahead of print]

Schlegel, U.J., Knifka, J., Röllinghoff, M., Koebke, J., Eysel, P., Morlock, M.M.Influence of Cementing the Pin on Resistance to Fracture in Hip ResurfacingClinical Biomechanics 26 (2011) 136–140, 2011
Schlegel, U.J., Siewe, J., Delank, K.S., Eysel, P., Püschel, K., Morlock, M.M., Gebert de Uhlenbrock., A.Pulsed lavage improves fixation strength of cemented tibial componentsInt Orthop.35, 1165-1169, 2011

2010

Mour, M., Das, D., Winkler, T., Hoenig, E., Mielke, G., Morlock, M.M., Schilling A.F..Advances in porous biomaterials for dental and orthopaedic applicationsMaterials 2010, 3, 2947-2974.
Huber, G., Skrzypiec, D.M., Klein, A., Püschel, K., Morlock, M.M.High cycle fatigue behaviour of functional spinal unitsInd Health. 2010;48(5):550-6.
Hothan, A., Huber, G., Weiss, C., Hoffmann, N., Morlock, M.Deformation characteristics and eigenfrequencies of press-fit acetabular cupsClin Biomech Bristol Avon. 2011 Jan;26(1):46-51. Epub 2010 Sep 30.
Gebert de Uhlenbrock, A., Wintzer, C., Imig, H., Morlock, M.M.Fluid transfer as a mechanism leading to endotensionMed Eng Phys. 2010 Oct;32(8):914-20. Epub 2010 Aug 1.
Schlegel, U.J., Knifka, J., Röllinghoff, M., Koebke, J., Eysel, P., Morlock, M.M.Effects of impaction on cement mantle and trabecular bone in hip resurfacingArch Orthop Trauma Surg. (Ausgabe 00004/2011), S.459-464, 2011. Epub 2010 Jul 15.
Schlegel, U.J., Rothstock, S., Siewe, J., Schiwy-Bochat, K.H., Eysel, P., Morlock, M.M.Does Impaction Matter in Hip Resurfacing? A Cadaveric StudyJ Arthroplasty., 2011 Feb;26(2): 296-302. Epub 2010 May 31.
Winkler, T., Hoenig, E., Gildenhaar, R., Berger, G., Fritsch, D., Janssen, R., Morlock, M.M., Schilling, A.F.Volumetric analysis of osteoclastic bioresorption of calcium phosphate ceramics with different solubilitiesActa Biomater. 2010 Oct;6(10):4127-35. Epub 2010 May 7.
Winkler, T., Hoenig, E., Huber, G., Janssen, R., Fritsch, D., Gildenhaar, R., Berger, G., Morlock, M.M., Schilling, A.F.Osteoclastic bioresorption of biomaterials: Two- and three-dimensional imaging and quantificationInt J Artif Organs. 2010 Apr;33(4):198-203.
Rothstock, S., Uhlenbrock, A., Bishop, N., Morlock, M.Primary stability of uncemented femoral resurfacing implants for varying interface parameters and material formulations during walking and stair climbingJ Biomech. 2010 Feb 10;43(3):521-6, 2010.
Weiss, C., Gdaniec, P., Hoffmann, N.P., Hothan, A., Huber, G., Morlock, M.M.Squeak in hip endoprosthesis systems: An experimental study and a numerical technique to analyze design variantsMedical Engineering & Physics 32 (6): 604-609 JUL 2010.
Zustin, J., Hahn, M., Morlock, M.M., Rüther, W., Amling, M., Sauter, G.Femoral component loosening after hip resurfacing arthroplastySkeletal Radiology 39 (8): 747-756 Aug 2010.
Bergmann, G., Graichen, F., Rohlmann, A., Bender, A., Heinlein, B., Duda, G.N., Heller, M.O., Morlock, M.M.Realistic loads for testing hip implantsBio-medical Materials and Engineering 20 (2): 65-75 2010.
Zustin, J., Sauter, G., Morlock, M.M., Rüther, W., Amling, M.Association of Osteonecrosis and Failure of Hip Resurfacing ArthroplastyClin Orthop Relat Res. (2010) 468: 756-761, 2010.
Lehmann, W., Rupprecht, M., Hellmers, N., Sellenschloh, K., Briem, D., Püschel, K., Amling, M., Morlock, M., Rueger, J.MBiomechanical evaluation of peri- and interprosthetic fractures of the femur<u1:p></u1:p>The Journal of Trauma, Injury, Infection and Critical Care 2010 Jun;68(6):1459-63.

2009

Weiss, C., Hothan, A., Morlock M., Hoffmann, N.Friction-Induced Vibration of Artificial Hip JointsGAMM-Mitt. 32, No. 2, 193 – 204 (2009), 2009.
Lange,T., Schilling, A.F., Peters, F., Haag, F., Morlock, M.M., Rueger, J.M., Amling, M.Proinflammatory and osteoclastogenic effects of beta-tricalcium­phosphate and hydroxyapatite particles on human mononuclear cells in vitroBiomaterials. 2009 Jul 2. [Epub ahead of print]
Röhl, K., Ullrich, B., Huber, G., Morlock, M.M.Biomechanical analysis of expansion screws and cortical screws used for ventral plate fixation on the cervical spineEur Spine J. 2009 Jul 9. [Epub ahead of print]
Learmonth, I.D., Morlock, M.M.Towards understanding polyethylene wear; a clinical viewTribologyin Orthopaedics Newsletter, No. 7, March, p.16-17., 2009
Huber, G., Weik, T., Morlock, MSchädigung eines Hüftendoprothesenschaftes durch Einsatz eines HochfrequenzmessersOrthopäde 2009 [Epub ahead of print].
Graeff, C., Chevalier, Y., Charlebois, M., Varga, P., Pahr, D., Nickelsen, T.N., Morlock, M.M., Glüer, C.C., Zysset P.K.Improvements in vertebral body strength under teriparatide treatment assessed in vivo by finite element analysis: results from the EUROFORS studyJ Bone Miner Res., Vol 24, Issue 10, p1672-1680, 2009
Bergmann, G., Graichen, F., Rohlmann, A., Bender, A., Heinlein, B., Duda, G.N., Heller, M.O., Morlock, M.M.Realistic loads for testing hip implantsBio-Medical Materials and Engineering 2009 (in press).
Pörtner, R., Goepfert, C., Wiegandt, K., Janssen, R., Ilinich, E., Paetzold, H., Eisenbarth, E., Morlock, M.Technical Strategies to Improve Tissue Engineering of Cartilage-Carrier-ConstructsAdv Biochem Eng Biotechnol. 2009;112:145-81.
Pourzal, R., Theissmann, R., Morlock, M., Fischer, A.Micro-structural alterations within different areas of articulating surfaces of a metal-on-metal hip resurfacing system17th International Conference on Wear of Materials (WOM), Las Vegas, 2009.
Gebert, A., Peters, J., Bishop, N.E., Westphal, F., Morlock, M.M.Influence of press-fit parameters on the primary stability of uncemented femoral resurfacing implantsMedical  Engineering & Physics,  31(1):160-4, 2009.
Bishop, N.E., Schoenwald, M., Schultz, P., Pueschel, K., Morlock M.M.The condition of the cement mantle in femoral hip prosthesis implantations - a post mortem retrieval studyHip International, 19(2):87-95, 2009.

2008

Renkawitz, T., Santori, F.S., Grifka, J., Valverde, C., Morlock, M.M., Learmonth, I.D.A new short uncemented, proximally fixed anatomic femoral implant with a prominent lateral flare: design rationals and study design of an international clinical trialBMC Musculoskeletal Disorders 2008, 9:147, 2008.

Morlock, M.M., Bishop, N., Zustin, J., Hahn, M., Rüther, W., Amling, M.

Modes of implant failure after hip resurfacing: morphological and wear analysis of 267 retrieval specimens

="" style="vertical-align: top;" class="align_left">

JBJS-Am. 2008;90 Suppl 3:89-95, 2008.

Windolf, M., Götzen, N., Morlock, M.

Systematic accuracy and precision analysis of video motion capturing systems - exemplified on the Vicon-460 system

="" rowspan="1" style="vertical-align: top;" class="align_left">

Journal of Biomechanics, 2008 Jul 29. [Epub ahead of print]

Morlock, M.M., Bishop, N., Stahmer, F., Zustin, J., Sauter, G., Hahn, M., Krause, M., Rüther, W., und Amling, M.

Versagensgründe von Oberflächenersatzimplantaten der Hüfte - Eine Analyse von 250 Revisionspräparaten

="" rowspan="1" style="vertical-align: top;" class="align_left">

DerOrthopäde 2008 (E-pub ahead of print).

Bergmann, G., Graichen, F., Rohlmann, A., Heinlein, B., Duda, G., Heller, M.,
Morlock, M.

Realistic loads for testing hip implants

="" rowspan="1" style="vertical-align: top;" class="align_left">

J. Biomech. Engineering (submitted).

Morlock, MM.

Editorial

="" rowspan="1" style="vertical-align: top;" class="align_left">ClinBiomech (Bristol, Avon). 2008 Apr 4.

Simon, L.C., Schultz, A.P., Morlock, M., Jürgens, C.

"Basketball Foot"-Prognose nach medialer subtalar Luxation

="" rowspan="1" style="vertical-align: top;" class="align_left">

Sportverletzung - Sportschaden, Vol 22:p. 31-37, 2008.

Seidel, H., Pöpplau, B., Morlock, M., Püschel, K., Huber, G.

The size of lumbar vertebral endplate areas - Prediction by anthropometric characteristics and significance for fatigue failure due to whole-body vibration

="" rowspan="1" style="vertical-align: top;" class="align_left">

International Journal of Industrial Ergonomics, p. 1-12, 2008

Eisenbarth, E., Paetzold, H., Morlock, M.

Veränderung der biochemischen und biomechanischen Eigenschaften von Knorpel durch unconfined compression Tests in phosphatgepufferter Salzlösung (Alteration of biochemical and biomechanical cartilage properties by means of unconfined compression tests in phosphate buffered saline solution)

="" rowspan="1" style="vertical-align: top;" class="align_left">

Biomedical Engineering (accepted).

Gebauer, M., Goetzen, N., Barvencik, F., Rupprecht, M., Rueger, J., Püschel, K., Morlock, M. and Amling, M.

Biomechanical analysis of atlas fractures. A study on 40 human atlas specimens

="" rowspan="1" style="vertical-align: top;" class="align_left">

Spine. 2008 Apr 1;33(7):p. 766-70.

Bishop, N., Waldow, F., Morlock, M.M.

Friction moments of large metal-on-metal hip joint bearings and other modern designs

="" rowspan="1" style="vertical-align: top;" class="align_left">

Med Eng Phys. 2008 Feb 19;. [Epub ahead of print]

2007

Morlock, M., Bishop, N.

Tribologie unterschiedlicher Gleitpaarungen: Ein wesentlicher Aspekt in der Revisionsendoprothetik (Tribology in Revision Arthroplasty)

in: Revisionsendoprothetik der Hüftpfanne Hsg. Wirtz, Rader, Reichel, Springer Verlag, S. 201-229, 2007.

Grant, J.A., Bishop, N., Götzen, N., Sprecher, C., Honl, M., Morlock, M.

Artificial composite bone as a model of human trabecular bone: The implant-bone interface

="" style="vertical-align: top;" class="align_left">

Journal of Biomechanics, Vol. 40 (5), p. 1158-1164, 2007.

Rikli, D., Honigmann, P., Babst, R., Cristalli, A., Morlock, M., Mittlmeier, T.

Intra-articular pressure measurement in the radioulnocarpal joint using a novel sensor: in vitro and in vivo results

="" rowspan="1" style="vertical-align: top;" class="align_left">

J Hand Surg [Am]. Vol.32(1):p.67-75, 2007.

Huber, G., Morlock, M., Ito,

Consistent hydration of intervertebral discs during in vitro testing

="" rowspan="1" style="vertical-align: top;" class="align_left">

Medical Engineering & Physics, Vol. 29, Issue 7, p. 808-813, 2007

2006

Morlock, M., Rüther, W., Hahn, M., Delling, G.

Wunsch und Wirklichkeit - Tribologie und Implantationstechnik des Oberflächenersatzes

Orthopädie im Profil, Vol. 2, Nr. 1, S. 16-17, 2006.

Honl, M., Schwieger, K., Salineros, M., Jacobs, J., Morlock, M., Wimmer, M.

Orientation of the acetabular component: a comparison of five navigation systems with conventional surgical technique

="" style="width: 35%; vertical-align: top;" class="align_left">

JBJS-Br, Vol. 88 Nr. 10, p. 1401-1405, 2006.

Hornez NC., Chai F., Eisenbarth E., Traisnel M., Breme J., Hildebrand H.

Cytocompatibility and biocorrosion of implant alloys in different cell culture systems

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Biomaterialien 7 (2), 2006, 82-89

Eisenbarth E., Velten D., Müller M., Thull R., Breme J.

Nanostructured niobium oxide coatings influence osteoblast adhesion

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

J Biomed Mater Res A. 2006 Oct; 79(1): 166-75.

Eisenbarth E., Velten D., Breme J.

Biomimetic Implant Coatings

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Biomolecular Engineering 24 (2007) 27-32

Morlock, M.

Gleitpaarung heute und morgen

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

MedReport, Nr. 19, Vol. 30, S. 5, 2006.

Morlock, M.

Die Biomechanik des Fußes

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Wintertagung der österreichischen gesellschaft für Fußchirurgie, Wien, Jatros Orthopädie, Vol. 11, Nr. 1, p. 12-14, 2006.

Westphal, F., Bishop, N., Honl, M., Hille, E., Püschel, K., Morlock, M.

Migration and cyclic motion of a new short-stemmed hip prothesis – a biomechanical in-vitro study

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Clin Biomech 21(8):834-40, 2006.

Westphal, F., Bishop, N., Püschel, K., Morlock, M.

Biomechanics of a new short-stemmed uncemented hip prothesis: an in-vitro study in human bone

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Hip International, Vol. 16 S-3, p. 22-29, 2006.

Klestil, T., Morlock, M., Schwieger, K., Sellenschloh, K., Curda, B., Biedermann, R., Hennerbichler, A., Schmoelz, W., Rabl, W., Blauth, M.

Migration of two different cementless hip arthoplasty stems in combination with two different heads: a biomechanical in vitro study

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Arch Orthop Trauma Surg. 126 (6): 387-93, 2006.

Siebel, T., Maubach, S., Morlock, M.

Lessons learned from early clinical experience and results of 300 ASR® hip resurfacing implantations

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p 345-353, 2006.

Morlock, M., Bishop, N., Rüther, W., Delling, G., Hahn, M.

Biomechanical, morphological and histological analysis of early failures in hip resurfacing arthroplasty

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 333-344, 2006.

Yew, A., Jin, Z., Donn, A., Morlock, M., Isaac, G.

Deformation of press-fitted metallic resurfacing cups. Part 2: finite element simulation

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 311-319, 2006.

Jin, Z., Meakins, S., Morlock, M., Parsons, P., Hardaker, C., Flett, M., Isaac, G.

Deformation of press-fitted metallic resurfacing cups. Part 1: experimental simulation

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 299-309, 2006.

2005

Morlock, M., Spears, I., Pfleiderer, M., Schneider, E.

Micromotion at the bone-implant interface

Proceedings of the 1st GAMM Seminar on Continuum Biomechanics. Editors. W. Ehlers B. Markert. Report No. II-14, Glückauf Verlag, Essen, p.99-108, 2005.

Morlock, M.

Editorial

Clinical Biomechanics 20(9):S1, 2005.

Morlock, M., Bishop, N.

The bigger the better – Tribologie aus der Sicht des Großkopfes

Orthopaedic Dimensions 2 / 2005, p. 16-18, 2005.

Honl, M., Schwieger, K., Gauck, Ch., Lampe, F., Morlock, M.M., Wimmer, M., Hille, E.

Pfannenposition und Orientierung im Vergleich – Navigation vs. konventionelle Handimplantation von Hüftendoprothesen

Orthopäde 34(11):p. 1131-6, 2005.

Huber, G., Paetzold, H., Püschel, K., Morlock, M.

Verhalten von Wirbelsäulensegmenten bei dynamischer Belastung

Schriftenreihe der Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Fb 1062, Wirtschaftsverlag, Dresden, 2005.

Nagel-Heyer S., Goepfert C., Morlock M. and Pörtner, R.

Relationship between physical, biochemical and biomechanical properties of tissue-engineered cartilage-carrier-constructs

Biotechnology Letters (27):187-192, 2005.

Hoffmann B., Kokott A., Schafranska o., Detsch R., Winter S., Eisenbarth E., Peters K., Breme J., Kirkpatrick CJ., Ziegler G.

TiO2-Beschichtung auf Implantatlegierungen im Korrosions-, Auslaug- und Biokompatibilitätstest

Biomedizinische Technik Oktober 2005, Band 50, Heft 10, 320-329

Peters K., Unger R., Eisenbarth E., Hoffmann B., Detsch R., Schäfer J., Stumpf S., Breme J., Ziegler G., Kirkpatrick C.

The Intercellular Contact as an Indicator for Compatibility of Biomaterials in Endothelial Cells

="" style="vertical-align: top;">

Biomaterialien 6(1), 2005: 7-13

Velten D., Eisenbarth E., Schanne N., Breme J.

Biomedical Oxide Coatings on Ti-alloys prepared by means of the Sol-Gel Process

="" rowspan="1" style="vertical-align: top;">

Biomaterialien (6)1, 2005: 22-28

Seebeck J., Goldhahn J., Morlock M., Schneider E.

Mechanical behaviour of screws in normal and osteoporotic bone="" rowspan="1" style="vertical-align: top;">

Osteoporosis International 16 Suppl 2: p.107-11 2005.

Götzen, N., Nassutt, R., Lampe, F., Morlock, M.

Load-shift – numerical evaluation of a new design philosophy for uncemented hip prostheses

="" rowspan="1" style="vertical-align: top;">

Journal of Biomechanics 38(3):595-604, 2005.

2004

Morlock, M.

Biomechanik

In: Lendenwirbelsäule Ursachen, Diagnostik und Therapie von Rückenschmerzen. Hrsg.: Hildebrandt, Jan; Müller, Gerd; Pfingsten, Michael. Urban & Fischer. S.150-164, 2004, ISBN 3-437-23250-9.

Eisenbarth E., Velten D., Müller M., Breme J.

Biocompatibility of ß-stabilizing elements of titanium alloys

Biomaterials. 2004 Nov; 25 (26):5705-13

Tinschert J., Götzen N., Natt, G., Morlock M.M., Spiekermann H.

Vollkeramische Brücken aus Oxidkeramik – Ist die Lebensdauer vorhersagbar?

Biomaterialien 5, 50-51, 2004.

Honl M., Schwieger K., Dries S., Gauck Ch., Lampe F., Morlock M., Wimmer M.

COMPARISON OF THR-CUP-ORIENTATION USING DIFFERENT NAVIGATION SYSTEMS

CAOS International Meeting 2004.

Seebeck J., Goldhahn J., Städele H., Messmer P., Morlock M.M., Schneider, E.

Effect of cortical thickness and cancellous bone density on the holding strength of internal fixator screws

J Orthop Res. 2004 Nov;22(6):1237-42, 2004.

Niehoff, A., Kersting, U., Zaucke, F., Morlock, M., Brüggemann, G.-P.

Adaptation of mechanical, morphological, and biochemical properties of the rat growth plate to dose-dependent voluntary exercise

="" style="vertical-align: top;" class="align_left">

Bone 35(4):899-908, 2004.

Schwieger, K., Rentzsch, R., Carrero, V., Becker, A., Bishop, N., Hille, E., Louis, H., Morlock, M., Honl, M.

The abrasive water jet cutting as a new procedure for cutting cancellous bone – in vitro testing in comparison with the oscillating saw

="" rowspan="1" style="vertical-align: top;" class="align_left">Journal of Biomedical Materials Research, Nov 15, 71B(2):223-8, 2004.

2003

Wintzer, Ch., Birken, L., Kleinschmidt, D., Riepe, G., Morlock, M., Müller, J., Debus, E., Imig, H.

Systemdruck bei Typ III Endoleak – Untersuchungen im Kreislaufsimulator

Gefässchirurgie 8: 206-211, 2003.

Morlock, M., Lampe, F., Honl, M.

Biomechanik des GelenkersatzesMedizintechnik-Report Hamburg, TUHH-Technologie GmbH, S. 7-10, 2003.

Wening, J.V., Stegemann, J., Lechert, B., Morlock, M.M., Püschel, K.

Zertifiziertes Materialversagen

Mitteilungen der DGU Vol 25 Nr. 48 Oktober, S. 43-44, 2003.

Lampe, F., Nassutt, R., Götzen, N., Honl, M., Dries, S., Kokenge, T., Morlock, M. und Hille, E.

Die Load Shift-Hüftendoprothesenumerische und klinische Evaluation eines neuenKonzepts der adaptiven Stielverankerung [Load shift-total hip replacement - numerical and clinical evaluation of a new concept of adaptive stem fixation]

Z Orthop Ihre Grenzgeb 141(6):657-64, 2003, Zeitschrift für Orthopädie.

Honl, M., Carrero, V., Schwieger, K., Rentzsch, R., Dierk, O., Drie, S., Pude, F., Bluhm, A., Hille, E., Louis, H., und Morlock, M.

The pulsed water jet for selective removal of bone cement during revision arthroplasty

Biomed Tech 48(10):275-80, 2003.

Honl, M., Schwieger, K., Carrero, V., Rentzsch, R., Dries, S., Pude, F., Bluhm, A., Hille, E., Louis, H., Morlock, M.,

Der gepulste Wasserstrahl zur selektiven Knochenzement­entfernung in der Revisionsendoprothetik

Biomed Tech. 48, S. 275-280, 2003.

Honl, M., Rentzsch, R., Schwieger, K., Carrero, V., Dierk, O., Dries, S., Louis, H., Pude, F., Bishop, N., Hille, E., Morlock, M.

The water jet as a new tool for endoprosthesis revision surgery - an in vitro study on human bone and bone cement

Biomed Mater <st1:place w:st="on"><st1:country-region w:st="on">Eng.</st1:country-region></st1:place> 2003; 13(4): 317-25.

Wagner, J.F., Lippens, V., Nagel, V., Morlock, M., Vollmer, M.

An Instrument Quantifying Human Balance Skills: Attitude Reference System for an Ankle Exercise Board

International Journal of Computer Science in Sport, SE1, 96-110, 2003.

Honl, M., Uebeyli, H., Dierk, O., Schwieger, K., Rentzsch, R., Carrero, V., Dries, S., Betthäuser, A., Höpker, W., Hille, E., Morlock, M.

Der Druckwasserstrahl zum selektiven Abtrag der Synovialis– In-vitro-Studie zur Machbarkeit eines neuen Synovektomieverfahrens

Z Orthop; 141:322-327, 2003.

Huber, G., Linke, B., Morlock, M. M., and Ito, K.

The Influence of In Vitro Testing Method on Measured Intervertebral Disc Characteristics

Spinal Implants: Are We Evaluating Them Appropriately, ASTM STP 1431, M. N. Melkerson, S. L. Griffith, and J. S. Kirkpatrick, Eds., ASTM International, <st1:place w:st="on">West Conshohocken</st1:place>, PA, 2003.

Honl, M., Dierk, O., Gauck, C., Carrero, V., Lampe, F., Quante, M., Schwieger, C., Hille, E., Morlock, M.

Comparison of robotic-assisted and manual implantation of a primary total hip replacement – a prospective study

="" style="vertical-align: top;" class="align_left">

J Bone Joint Surg Am 85: 1470-1478, 2003.

v. Knoch, M., Bluhm, A., Morlock, M., von Foerster, G.

Absence of surface roughness changes after insertionof one type of matte cemented femoral component during 2 to 15 years

="" rowspan="1" style="vertical-align: top;" class="align_left">

J Arthroplasty;18(4):471-477, 2003.

Honl, M., Morlock, M., Mallwitz, J., Hille, E. and Delling, G.

Pelvic girdle reconstruction by spinal fusion in combination with ischial screw fixation in a case of Aneurysmal Bone Cyst

="" rowspan="1" style="vertical-align: top;" class="align_left">

Sarcoma, p.1-6, 2003.

2002

Neumann, H.G., Baumann, A., Wanke, G., Hamelynck, K.J., Morlock, M.

Ceramized articulating surfaces of metal-metal hip joint prosthesis

BIOCERAMICS 14 KEY ENGINEERING MATERIALS 218-2: 601-604, 2002

E. Reichle, M. Morlock, K. Sellenschloh, C. Eggers

Zur Definition der Pedikelfehllage Primärstabilität und Lockerungsverhalten von Pedikelschrauben in Abhängigkeit von ihrer Lage: spongiöse Verankerung, kortikale Verankerung, Perforation und Fehllage

Orthopäde 31 (4), 402-405, 2002

E. Reichle, K. Sellenschloh, M. Morlock, C. Eggers

Einbringung von Pedikelschrauben unter Einsatz unterschiedlicher Unterstützungsverfahren Ein Laborversuch an 12 Wirbelsäulenpräparaten

Orthopäde 31 (4), 368-371, 2002

Riepe, G., Heintz, C., Kaiser, E., Chakfe, Morlock M, Delling M, Imig,

What can we learn from explanted endovascular devices?

="" style="vertical-align: top;" class="align_left">

Orthopäde 31 (4), 368-371, 2002.

Morlock, M., Strandborg, J., Sellenschloh, K., Nassutt, R., Püschel, K., Eggers, Ch.

Vergleich unterschiedlicher Wirbelkörperersatzsysteme hinsichtlich Migration und Primär­stabilität bei dorso-ventraler Spondylodese nach Korporektomie mit und ohne Laminektomie

="" rowspan="1" style="vertical-align: top;" class="align_left">

European Journal of Vascular and Endovascular Surgery, Vol. 24, pp. 117-122, 2002.

Honl, M., Carrero, V., Hille, E., Schneider, E., Morlock, M.

Bone-Patellar-Tendon-Bone Grafts for ACL Reconstruction – An in-vitro investigation of the mechanical Beviour under Static ans Dynamic Loading Conditions

="" rowspan="1" style="vertical-align: top;" class="align_left">Orthopäde 31 (5):514-521, 2002

Riepe, G., Meincke, J., Nassutt, R., Morlock, M., Gross-Fengels, W., Imig, H.

Schädigung von Polyestergefäßprothesen durch Gefäßklemmen

="" rowspan="1" style="vertical-align: top;" class="align_left">

American Journal of Sports Medicine Jul-Aug 30(4): pp. 549-557, 2002.

Hahn, M., Nassutt, R., Delling, G., Mahrenholtz, O., Schneider, E., Morlock, M.

The Influence of Material and Design Features on the Mechanical Properties of Transpedicular Spinal Fixation Implants

="" rowspan="1" style="vertical-align: top;" class="align_left">

Zentralblatt für Chirurgie (Zentralbl Chir.) Mar; 127(2):89-94, 2002.

2001

Riepe G, Chakfe N, Meincke J, Nassutt R, Seemann D, Klinggraff G, Morlock M, Imig H.

Late complications after alloplastic vascular replacement

Kongressbd Dtsch Ges Chir Kongr. ;118:p.475-7, 2001.

Wimmer, M., Artelt, D., Kunze, J., Morlock, M., Schneider, E., Nassutt, R.

Friction and wear properties of metal/metal hip joints – application of a novel testing and analysis method

Zeitschr. Matwiss. 32: p. 891-896, 2001.

Morlock, M., Nassutt, R., Vollmer, M., Groß, E., Huber, G.

Schlagkräfte beim Boxen

SENSOR report, Vol. 16, No. 1, S. 20-21, 2001.
Honl, M., Dierk, O., Müller, V., Küster, J., Hille, E., Morlock, MDie Jet Cutting Diskotomier – ein neues mikroinvaives Verfahren="" rowspan="1" style="vertical-align: top;" class="align_left">

in: Siegert, R., Jurk, V., Magritz, R. (Hrsdg.) Wasserstrahldissektion in der Medizin, Books on Demand GmbH, S. 79-90, 2001.

Honl, M., Dierk, O., Küster, J.R., Müller, G., Müller, V., Hille, E., Morlock, M.

Die Wasserstrahldiskotomie im mikroinvasiven Zugang – In-vitro Testung und erste klinische Aspekte eines neuen Verfahrens

="" rowspan="1" style="vertical-align: top;" class="align_left">

Zeitschrift für Orthopädie und ihree Grenzgebiete, Vol. 139 Nr. 1, S. 45-51, 2001.

Heintz, C., Riepe, G., Birken, L., Kaiser, E., Chakfé, N., Morlock, M., Delling, G. and Imig, H.

Corroded nitinol wires in explanted aortic endografts: an important mechanism of failure?

="" rowspan="1" style="vertical-align: top;" class="align_left">J Endovasc Ther. 8(3):p. 248-53, 2001.

Morlock, M., Schneider, E., Bluhm, A., Vollmer, M., Bergmann, G., Müller, V., Honl, M.

Duration and Frequency of Every Day Activities in Total Hip Patients

="" style="vertical-align: top;" class="align_left">

Journal of Biomechanics Vol. 34 (7), p. 873-881, 2001.

Morlock, M., Nassutt, R., Janßen, R., Willmann, G., Honl ,M.

Mismatched Wear Couple Zirconium Oxide / Aluminium oxide in Total Hip Replacement: A Case Study

="" rowspan="1" style="vertical-align: top;" class="align_left">Journal of Arthroplasty 16 (8), pp.1071-1074, 2001.

Spears, Pfleiderer, M., Schneider, E., Morlock, M., and Hille, E.

The effect of interfacial parameters on cup-bone relative micromotions: A finite element investigation

="" rowspan="1" style="vertical-align: top;" class="align_left">Journal of Biomechanics Vol 34 No. 1, pp. 113-120, 2001.

Morlock, M. und Schneider, E.

Meßsystem zur Belastungsanalyse bei Pflegekräften am Arbeitsplatz und Ergebnisse

="" rowspan="1" style="vertical-align: top;" class="align_left">in: Low Back Pain in the Health care Profession, ISSA Prevention Series No. 1024, Hamburg, S. 76-81, 2001.

Lampe, F., Morlock, M., Pfleiderer,M., Wimmer, M., Nassutt, R. und Schneider,E.

Die Auswirkungen von Belastungen auf die Endoprothesen-Knochenverbindung - Konsequenzen für Design, Verweildauer und Rehabilitation

="" rowspan="1" style="vertical-align: top;" class="align_left">

in: Zschorlich, V. (Hrsg.) “Prävention und Rehabilitation des Haltungs- und Bewegungsapparates”, Schriftenreihe der Deutschen Vereinigung für Sportwissenschaft, Academia Verlag, St. Augustin, Bd. 103, pp. 49-66, 2001.

2000

Honl, M., Rentsch, R., Üebelyi, H., Hille, E., Morlock, M., Louis, H.

Water-jet cutting in medical use - an overview

in: Jetting Technology, BHR Group 2000, p. 183-196, 2000.

Morlock, M., Honl, M.

Biomechanik der Wirbelsäule - Belastung, Einfluss von Degeneration und operativer Verfahren auf das mechanische Verhalten

Materialien zum II. Wirbelsäulenkurs, BG Klinik Bergmannstrost, Halle, S. 15-22, 2000.

Meenen, N., Sarvary, A., Mühlenfeld, K., Sotonyi, P., Morlock, M., Baranyi, G., Rueger, J.

Behandlungsverfahren: Ruptur der Achillessehne - Argumente für die Nahtversorgung

="" style="width: 35%; vertical-align: top;" class="align_left">

Trauma und Berufskrankheit, Vol. 2, Nr. 5, S. 157-159, 2000.

Riepe, G., Chafke, N., Morlock, M., Schröder, A., Imig, H.

Langzeitverhalten von Gefäßprothesen im Menschen - Degeneration des Polyesters durch Hydrolyse

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">In: in: Meenen, N., Katzer, A., Rüger, J., (eds.) Zelluläre Interaktion mit Biomaterialien, Hefte zur Zeitschrift "der Unfallchirurg", Vol. 278, S.175-177, 2000.

Müller, V., Dierk, O., Morlock, M., Hille, E. und Honl, M.

Aneurysma spurium der Arteria poplitea nach vorderer Kreuzbandplastik="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Zeitschrift für Arthroskopie Vol. 13, p. 194-196, 2000.

Spears, Pfleiderer, M., Schneider, E., Hille, E., Bergmann, G., Morlock, M.

Interfacial conditions between a press-fit acetabular cup and bone during daily activities: Implications for achieving bone in-growth

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Journal of Biomechanics Vol 33, No. 11, p. 1471-1477, 2000.

Honl, M., Lampe, F., Gauck, CH., Müller, G., Morlock, M., und Hille, E.

Die robotergestützte Implantation von Hüftendoprothesen - Erfahrungen und Ergebnisse nach 100 Operationen

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">exracta orthopaedica, Heft 1, S. 1-6, 2000.

Honl, M., Rentzsch, R., Lampe, F., Müller, V., Dierk, O., Hille, E., Louis, H., Morlock, M.

Water Jet Cutting zur Bearbeitung von Knochen und Knochenzement - Parameterstudie zu Möglichkeit und Grenzen einer neue Methode

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Medizintechnik Vol. 45, Nr. 9, p. 222-227, 2000.

Riepe, G., Heintz, C., Chafké, N., Morlock, M., Groß-Fengels, W., Imig, H.

Stentdrahtbrüche und Maschenlockerungen explantierter, endovaskulärer Prothesen

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Zentralblatt für Chirurgie 125, S. 22-26, 2000.

Honl, M., Rentsch, R., Müller, G., Brandt, C., Hille, E., Louis, H., Morlock, M.

The use of water-jetting technology in prostheses revision Surgery – First results of parameter studies on bone and bone cement

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

J Biomed Mater Res., Vol. 53, No. 6, pp. 781-790, 2000.

Morlock, M., Bonin, V., Mueller G., Deuretzbacher, C. and Schneider E.

Determination of the In-vivo Loading of the Lumbar Spine with a new approach directly at the Workplace – first results for nurses="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">Clinical Biomechanics, Vol. 15, No. 8, pp. 549-558, 2000.

Honl, M., Lampe, F., Gauck, CH., Müller, G., Morlock, M., und Hille, E.

Die robotergestützte Implantation von Hüftendoprothesen - Erfahrungen und Ergebnisse nach 100 Operationen

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

extracta orthopaedica, Heft 1, S. 1-6, 2000.

1999 / 1998

Hahn, M., Nassutt, R., Morlock, M., Delling, G., Schneider, E.,

Ein vereinfachtes Verfahren zur mechanischen Prüfung von LWS-Implantaten

Biomedizinische Technik, Vo. 44, Nr.10, S. 283-289, 1999.

Honl, M., Müller, V., Morlock, M., Dierk, O., Betthäuser, A., Müller, G., Hille, E., Schneider, E.

Altersabhängigkeit der Fixationsfestigkeit der ACL-Plastik. Klinische Übertragung einer in-vitro Studie

Deutsche Zeitschrift für Sportmedizin, Vol. 49, Sonderheft 1, S. 233-237, 1998.

Morlock, M. und Nassutt, R.

Ermittlung der Eigenschaften und der Wirkung kohäsiver Stützbandagen

="" style="vertical-align: top;" class="align_left">

Orthopädietechnik, Vol. 50, Nr. 5, S. 400-412,. 1999.

Morlock, M., Schneider, E.

Die Bestimmung der Belastung von Krankenpflegekräften am Arbeitsplatz - Erste Ergebnisse="" rowspan="1" style="vertical-align: top;" class="align_left">

Sichere Arbeit Internationales Fachmagazin für Prävention in der Arbeitswelt, Nr. 4, S. 22-27, 1999.

Müller, G., Morlock, M., Vollmer, M., Honl, M., Hille, E. and Schneider, E.

Intramuscular Pressures in the Erector Spinae and Intraabdominal Pressure Related to Posture and Loading

="" rowspan="1" style="vertical-align: top;" class="align_left">

Spine, Vol. 23, No. 23, p. 2580-2590, 1998.

Nassutt, R., Morlock, M.,

Mechanische Überprüfung der Winkelstabilität von internen Fixateuren und winkelstabilen Plattensystemen

="" rowspan="1" style="vertical-align: top;" class="align_left">

Trauma und Berufskrankheit, Vol. 1, Nr. 4, S. 398-401, 1999.

Placzek, R., Birken, L., Morlock, M., Rüther, W., Schneider, E

Der Einfluss unterschiedlicher Zylinderdurchmesser von Implantaten zur lumbalen Wirbelsäulenfusion auf die Kompressionsfestigkeit im FSU-Modell

="" rowspan="1" style="vertical-align: top;" class="align_left">

Biomedizinische Technik, Band 43, Heft 9, S. 253-256, 1998.

Placzek, R., Kothe, R., Knopf, U., Morlock, M., Rüther, W., Schneider, E.

Mechanische Untersuchung potentieller keramischer Implantatmaterialien zur minimal-invasiven abterioren lumbalen interkorporellen Fusion

="" rowspan="1" style="vertical-align: top;" class="align_left">

Biomedizinische Technik, Band 44, Heft 7-8, S. 206-211, 1999.

Rehbein, P., Nassutt, R., Eggers, Ch. und Morlock, M.,

Mechanische Testungen von Implantaten für die 'Ventrale interkorporelle Spondylodese' für die untere Halswirbelsäule

="" rowspan="1" style="vertical-align: top;" class="align_left">

Trauma und Berufskrankheit, Vol. 1, Nr.4, S. 332-336, 1999.

Riepe, G., Heilberger, P., Umscheid, T., Chafke, N., Raithel, D., Stelter, W., Morlock, M., Kretz, J., Schröder, A. and Imig, H.

The Frame Dislocation of Body Middle Rings in Endovsacular Stent Tube Grafts

="" rowspan="1" style="vertical-align: top;" class="align_left">

European Journal of Vascular and Endovascular Surgery, Vol. 17, pp.28-34, 1999.

Seebeck, J., Morlock, M., und Schneider, E.,

Optimale Implantatverankerung in osteoporotischem Knochen mittels monokortikaler Schrauben

="" rowspan="1" style="vertical-align: top;" class="align_left">

Trauma und Berufskrankheit, Vol. 1, Nr.4, S . 411-414, 1999.

Seide, K., Morlock, M., Schümann, U., Wolter, D.,

Wirkprinzipien der winkelstabilen Plattenschraubenverbindung bei Fixateur interne-Osteosynthesen

="" rowspan="1" style="vertical-align: top;" class="align_left">uma und Berufskrankheit, Vol. 1, Nr.4, S. 320-325, 1999.

Spears, I., Morlock, M., Pfleiderer, M., Schneider, E., and Hille, E.

The influence of friction and interference on the seating of a press-fit cup: A finite element investigation

="" rowspan="1" style="vertical-align: top;" class="align_left">Journal of Biomechanics, Vol. 32, pp. 1183-1189, 1999.

Morlock, M., Bonin, V., Mueller G., Deuretzbacher, C. and Schneider E.

Determination of the In-vivo Loading of the Lumbar Spine with a new approach directly at the Workplace – first results for nurses

="" rowspan="1" style="vertical-align: top;" class="align_left">

Clinical Biomechanics (accepted).

Morlock, M., Schneider, E., Bluhm, A., Vollmer, M., Bergmann, G., Müller, V., Honl, M

Duration and Frequency of Every Day Activities in Total Hip Patients

="" rowspan="1" style="vertical-align: top;" class="align_left">

Journal of Biomechanics (accepted).

Riepe, G., Chakfe, N., Whiteley, M., Nassutt, R., Morlock, M. und Imig. H.

Die Notwendigkeit eines Gefäßchirurgischen Prüflabors

="" rowspan="1" style="vertical-align: top;" class="align_left">

Gefäßchirurgie (accepted).

Riepe, G., Heintz, C., Chafké, N., Morlock, M., Groß-Fengels, W., Imig, H

Stentdrahtbrüche und Maschenlockerungen explantierter, endovasculärer Prothesen

="" rowspan="1" style="vertical-align: top;" class="align_left">

Zentralblatt für Chirurgie (accepted).

Spears, I., Morlock, M., Pfleiderer, M., Schneider, E., and Hille, E

Relative Micromotion at the bone-implant interface during the gait-cycle: A finite element approach

="" rowspan="1" style="vertical-align: top;" class="align_left">

Journal of Biomechanics (accepted)

Honl, M., Morlock, M., Mallwitz, J., Hille, E. and Delling, G

Pelvic girdle reconstruction by spinal fusion in combination with ischial screw fixation in a case of Aneurysmal Bone Cyst

="" rowspan="1" style="vertical-align: top;" class="align_left">

JBJS (submitted).

Honl, M., Rentsch, R., Bluhm, A., Hille, E., Morlock, M., Louis, H.,

Waterjetting Technology in Prosthesis Revision Surgery – Cutting Experiments on Bone and Bone Cement

="" rowspan="1" style="vertical-align: top;" class="align_left">

Applied Biomaterials(submitted).

Honl, M., Rentzsch, R., Lampe, F., Müller, V., Dierk, O., Hille, E., Louis, H., Morlock, M.

Water Jet Cutting zur Bearbeitung von Knochen und Knochenzement - Parameterstudie zu Möglichkeit und Grenzen einer neue Methode

="" rowspan="1" style="vertical-align: top;" class="align_left">

Medizintechnik (submitted).

Meenen, N., Englert, C., Morlock, M

The use of hydoxyapatite-ceramic as bone substitute for subchondral critical size bone defects

="" rowspan="1" style="vertical-align: top;" class="align_left">

Clinical Orthopaedics and Related Research (submitted).

Müller, G., Morlock, M., Vollmer, M., Honl, M., Hille, E. and Schneider, E.

Intramuscular Pressure Measurements in the Erector Spinae as a Tool to Quantify Dynamic Muscular Activity in-vivo

="" rowspan="1" style="vertical-align: top;" class="align_left">

Spine (submitted).

Müller, V., Dierk, O., Morlock, M., Hille, E. und Honl, M.

Aneurysma spurium der Arteria poplitea nach vorderer Kreuzbandplastik

="" rowspan="1" style="vertical-align: top;" class="align_left">

Zeitschrift für Arthroskopie (submitted).

Spears, I., Pfleiderer, M., Schneider, E., Hille, E., Bergmann, G., Morlock, M.

Interfacial conditions between a press-fit acetabular cup and bone during daily activities: Implications for achieving bone in-growth="" rowspan="1" style="vertical-align: top;" class="align_left">

Journal of Biomechanics (submitted).

v. Knoch, M., Bluhm, A., Morlock, M., von Förster, G.

Surface roughness changes of non-polished femoral components of artificial hip joints during 2 to 15 years in service

="" rowspan="1" style="vertical-align: top;" class="align_left">

JBJS (B) (submitted).

1997

Brüggemann, G.-P., Morlock, M. and Zatsiorsky, V.M. (1997)

Analysis of the bob and luge events (men) at the XVII Olympic Winter Games in Lillehammer

Journal of Applied Biomechanics, Vol. 13, No. 1, pp. 98-109.

Duda, G., Schneider, E., Chao, E.Y.S. (1997)

Internal forces and moments in the femur during walking

J Biomech 30, No. 9, pp. 933-942.

Matter, H.-P., Morlock, M. und Gruber, G. (1997)

Wie wirkt ein Schockabsorbermaterial in der Einlagenversorgung?

="" style="width: 35%; vertical-align: top;" class="align_left">

Orthopädieschuhtechnik, No. 10, S. 20-25.

Morlock, M., Mittlmeier, Th. (1996)

Modern gait anylsis: a tool to improve shoes, insoles and the understanding of foot function

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Acta OrthopaedicaBegica, Vol. 62, S1, pp. 11-16, 1996.

Morlock, M., Bonin, V. and Schneider, E. (1997)

Trunk muscle fatigue and associated EMG changes during a dynamic iso-inertial test

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">Euopean Journal of Applied Physiology, Vol. 76, No. 1, pp. 75-80.

Morlock, M., Brüggemann, H.-P. und Schneider E. (1997)

Muskuläre Stabilisierung und Kreuzschmerz, Österreichische Zeitschrift für Physikalische Medizin und Rehabilitation

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Vol. 7, Supplement 2, S. 16-22.

Müller, G. (1997)

Trainingstherapie im Rahmen der Manuellen Medizin (Training Therapy in Manual Medicine)

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Manuelle Medizin, Vol. 35, Nr. 4, S. 210-219.

Riepe, G., Loos, J., Imig, H., Schröder, A., Schneider, E., Petermann, J., Rogge, A., Ludwig, M., Schenke, A., Nassutt, R., Chafke, N. and Morlock, M. (1997)

Long-term in-vivo alterations of polyester vascular grafts in humans

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

European Journal of Vascular and Endovascular Surgery, Vol. 13, pp. 540-548.

Schneider, E. (1997)

Res biomechanica (hamburgensis)="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">Hefte zu "Der Unfallchirurg" Vol. 261, S. 3-5

Seide, K., Wolter, D., Kortmann, H. (1997)

Klinische Ergebnisse der Behandlung von Frakturen und Fehlstellungen mit einem Software - gesteuerten Hexapod - Mechanismus im Ilizarow-Ringfixateur

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Hefte zu "Der Unfallchirurg", Vol. 263, S. 927 – 929.

Spears, I. (1997)

A finite element model of prismatic enamel: A reappraisal of data on Young’s modulus

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Journal of Dental Research, Vol. 76, No.10, pp. 1690-1697.

Wimmer, M.A. and Andriacchi, T.P. (1997)

Tractive forces during rolling motion in the evaluation of wear in total knee replacement

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Journal of Biomechanics, Vol. 30, No. 2, pp. 131-137.

Wolter D. und Seide K. (1997)

Das intelligente Implantat

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">Hefte zu "Der Unfallchirurg" Vol. 261, S. 236-240

Kunze, J., Wimmer, M., Koelling, S., Schneider, E.

Determination of titanium and zirconium wear debris in blood serum by means of HNO3/HF pressurised digestion using ICP-optical emission spectrometry

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Fresenius Journal of Analytical Chemestry (accepted).

Lampe, F., Grischke, M., Wimmer, M., Nassutt, R., Klages, C., Hille, E., Schneider, E

Einfluß der Oberflächenhärte der Gelenkkugel auf abraive Verschleißmechanismen in der Paarung mit Polyethylen für künstliche Hüftgelenke

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Biomedizinische Technik (accepted).

Müller, G., Heinold, M., Stiller, T., Schröder, J. und Pietrek, M

Der Hamburger Rumpfmuskeltest. Ein klinischer Test zur quantitativen Erfassung von Maximalkraft und Kraftausdauer der Rumpfmuskulatur.

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

(A Clinical Test for Quantification of Trunk Muscle Strength and Endurance). Z. f. Sportmedizin (accepted).

Lampe, F., Betthäuser, A., Hille, E., Heinold, M., Schröder, J.

Limited range of motion quadriceps training adapted to different types of knee joint instabilities

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Knee Surgery Sports Traumatology Arthroskopy (submitted).

Lampe, F., Grischke, M., Klages, C.P., Wimmer, M.A., Nassutt, R., Hille, E. und Schneider, E.

Verschleißverhalten experimenteller amorpher Kohlenwasserstoff-Beschichtungen auf Kobalt-Chrom-Hüftköpfen in der Paarung mit Polyethylen

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Z. Orthopädie (submitted).

Morlock, M., Bonin, V., Mueller G. and Schneider E.

Loading of the Lumbar Spine at the Workplace

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

A Combined Biomechanical and Epidemiological Approach, Spine (submitted).

Müller, G., Morlock, M., Vollmer, M., Honl, M., Hille, E. and Schneider

E. Intra-muscular pressures in the erector spinae and intraabdominal pressure related to posture and loading

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Spine (submitted).

Riepe, G., Chakfe, N., Whiteley, M., Nassutt, R., Morlock, M. und Imig. H.

Die Notwendigkeit eines Gefäßchirurgischen Prüflabors

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Zeitschrift der Deutschen Gesellschaft für Gefäßchirurgie 1997

Riepe, G., Heilberger, P., Umscheid, T., Chafke, N., Raithel, D., Stelter, W., Morlock, M., Kretz, J., Schröder, A. and Imig, H.

The frame dislocation of body middle rings in endovsacularstent tube grafts

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

European Journal of Vascular and Endovascular Surgery (submitted).

Spears, I.

Functional adaptations of human molars: implications for interpreting the fossil record

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

American Journal of Physical Anthroplogy (submitted).

Spears, I.

The effect of Young’s modulus of restorative material on the distribution of tensile stress at the surface of a restored molar,

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Dental Materials (submitted).

Wimmer, M., Andriacchi, T., Natarajan, R., Loos, J., Karlhuber, M., Petermann, J., Schn eider, E., Rosenberg A.

A striated pattern of wear in UHMWPE components of Miller-Galante total knee replacement

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

J. Arthroplasty (submitted).

Wimmer, M.A., Andriacchi, T.P., Natarajan, R.N., Loos, J., Karlhuber, M., Petermann, J., Schneider, E. and Galante, J.O.

Early patterns of wear in retrieved UHMWPE components of total knee replacement,

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

J. Arthroplasty (submitted).

1996

Brüggemann, G.-P., Morlock, M. and Zatsiorsky

V.M. (1997) Analysis of the bob and luge events (men) at the XVII olympic winter games in Lillehammer

Appl Biomech 13, No. 1, 98-108.

Duda, G., Brand, D., Freitag, S., Lierse, W., Schneider, E. (1996)

Variability of femoral muscle attachments.

J Biomech 29, No. 9, 1185-1190.

Müller, G. und Hille, E. (1996)

Muskuläre Dysbalancen im Rumpf. Möglichkeiten und Grenzen der klinischen und maschinellen Diagnostik in der Sportmedizin.
(Muscular Imbalance of the Trunk - Properties and Limitations of Clinical and Machine Testing)

Part 1. Z. f. Sportmedizin 47, Nr. 4, 285-293.

Müller, G. und Hille, E. (1996)

Muskuläre Dysbalancen im Rumpf. Möglichkeiten und Grenzen der klinischen und maschinellen Diagnostik in der Sportmedizin.
(Muscular Imbalance of the Trunk - Properties and Limitations of Clinical and Machine Testing)

="" style="width: 35%; vertical-align: top;" class="align_left">

rt 2. Z. f. Sportmedizin 47, Nr. 5, 312-318.

Schneider, E., Wimmer, M.A. and Nassutt, R. (1996)

Das Abriebverhalten von Prothesenoberflächen im Knochenlager

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">Trilogie und Schmierungstechnik 43, Nr. 5, 242-244.

Schneider, E. (1997)

Res biomechanica (hamburgensis)

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Hefte zu "Der Unfallchirurg" 261, 3-5

Seide, K. und Wolter, D. (1996)

Universelle dreidimensionale Korrektur und Reposition mit dem Ringfixateur unter Anwendung der Fixateur - Anordnung.

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Unfallchirurg 99, 422-424.

von Strempel, A., Krönauer, I, Morlock, M.and Schneider, E. (1996)

Stability of the instrumented spine: dynamic versus rigid instrumentation. ="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

SPINE: State of the Art Reviews 10, No. 3, 397-408.

Wimmer, M.A. and Andriacchi, T.P. (1997)

Tractive forces during rolling motion in the evaluation of wear in total knee replacement.

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Journal of Biomechanics 30, No. 2, 131-137.

Wolter D. und Seide K. (1977)

Das intelligente Implantat.

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Hefte zu "Der Unfallchirurg" 261, 236-240.

Duda, G., Schneider, E., Chao, E.Y.S. (1997)

Internal forces and moments in the femur during walking

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

J Biomech (in press)

Morlock, M., Mittlmeier, Th. (1997)

Modern gait anylsis: a tool to improve shoes, insoles and the understanding of foot function

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Acta OrthBelgica (in press).

Morlock M., Bonin V. and Schneider E.(1997)

Trunk muscle activity and trunk muscle performance during an isodynamic fatigue test.

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

European Journal of Applied Physiology (in press).

Müller, G., Heinold, M., Stiller, T., Schröder, J. und Pietrek, M. (1997)

Der Hamburger Rumpfmuskeltest. Ein klinischer Test zur quantitativen Erfassung von Maximalkraft und Kraftausdauer der Rumpfmuskulatur.
(A Clinical Test for Quantification of Trunk Muscle Strength and Endurance).

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Z. f. Sportmedizin (in press).

Riepe, G., Loos, J., Imig, H., Schröder, A., Schneider, E., Petermann, J., Rogge, A., Ludwig, M., Schenke, A., Nassutt, R., Chafke, N. and Morlock, M. (1997)

Long-Term in-vivo Alterations of Polyester Vascular Grafts in Humans.

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Europ. J. of Vascular and Endovascular Surg (in press).

Lampe, F., Grischke, M., Klages, C.P., Wimmer, M.A., Nassutt, R., Hille, E. und Schneider, E.

Verschleißverhalten experimenteller amorpher Kohlenwasserstoff-Beschichtungen auf Kobalt-Chrom-Hüftköpfen in der Paarung mit Polyethylen.

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Z. Orthopädie (submitted).

Morlock, M., Bonin, V., Meyer, K. and Schneider, E.

Subjective versus Objective Workplace Loading in Nurses with and without a history of Occupationally-Related Low Back Disability.

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Clinical Biomechanics (submitted).

Morlock, M., Bonin, V., Mueller G. and Schneider E.

Loading of the Lumbar Spine at the Workplace - A Combined Biomechanical and Epidemiological Approach.

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

VOLVO AWARD, Spine (submitted).

Pfleiderer, M., Knecht, M., Peters, C., Schneider, E.

Initial stability and pelvic deformation with noncementedacetabular components - The influence of adjuvant screw fixation.

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

Clin OrthopRel Res (submitted).

Smit, Th.H., Odgaard, A. and Schneider, E

Structure and function of vertebral trabecular bone.

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

VOLVO AWARD, Spine (submitted).

Wimmer, M.A., Andriacchi, T.P., Natarajan, R.N., Loos, J., Karlhuber, M., Petermann, J., Schneider, E. and Galante, J

Early patterns of wear in retrieved UHMWPE components of total knee replacement

="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">

J. Arthroplasty (submitted).