2024

• Vibratory insertion of press-fit acetabular components requires less force than a single blow technique
  Niki, Yasaman; Huber, Gerd; Behzadi, Kambiz; Morlock, Michael
  Bone and Joint Research 13 (6): 272-278 (2024-06-05)
  Open Access | Verlags DOI
• The force at the implant cannot be assessed by the mallet force - unless supported by a model
  Schlieker, Peter; Morlock, Michael; Huber, Gerd
  PLoS ONE 19: e0303682 (2024-05-01)
  Open Access | Verlags DOI
• Small design modifications can improve the primary stability of a fully coated tapered wedge hip stem
  Glismann, Katja; Konow, Tobias; Lampe, Frank; Ondruschka, Benjamin; Huber, Gerd; Morlock, Michael
  PLoS ONE 19: e0300956 (2024)
  Open Access | Verlags DOI
• Stem size and stem alignment affects periprosthetic fracture risk and primary stability in cementless total hip arthroplasty
  Konow, Tobias; Glismann, Katja; Lampe, Frank; Ondruschka, Benjamin; Morlock, Michael; Huber, Gerd
  Journal of Orthopaedic Research 42 (4): 829-836 (2024-04)
  Open Access | Verlags DOI
• Influence of the type of stem and its fixation on revision and immediate postoperative mortality in elective total hip arthroplasty
  Morlock, Michael; Kirschbaum, Stephanie Maria; Perka, Carsten; Melsheimer, Oliver
  Bone and Joint Journal 106 B (3): 130-136 (2024)
  Open Access | Verlags DOI
• Festigkeit der Konusverbindung modularer Revisionshüftschäfte : Einfluss der Verunreinigung der Konusverbindung und der Fügebedingung auf die Relativbewegung und Abzugskraft zwischen Schaft und Halsteil der MRP-Prothese
  Böttcher, Julius M.; Sellenschloh, Kay; Strube, Anna; Huber, Gerd; Morlock, Michael M.
  Die Orthopadie 53: 47–55 (2024)
  Open Access | Verlags DOI

2023

• Understanding error patterns : an analysis of alignment errors in rigid 3D body scans
  Meißner, Julian; Kisiel, Michael; Thoppey Muthuraman Nagarajan; Morlock, Michael; Bannwarth, Sebastian
  Journal of Imaging 9 (12): 255 (2023)
  Open Access | Verlags DOI
• Design of a flexible mechatronic system for mechanical impedance measurement of the wrist as one step towards robotic rehabilitation
  Abbasimoshaei, Alireza; Tortorici, Ornella; Schilling, Arndt F.; Kern, Thorsten Alexander
  57th DGBMT Annual Conference on Biomedical Engineering (2023)
  
• The influence of hip revision stem spline design on the torsional stability in the presence of major proximal bone defects
  Böttcher, Julius; Sellenschloh, Kay; Huber, Gerd; Ondruschka, Benjamin; Morlock, Michael
  PLoS ONE 18 (9): e0291599 (2023-09-14)
  Open Access | Verlags DOI
• Design of a flexible mechatronic system for mechanical impedance measurement of the wrist as one step towards robotic rehabilitation
  Tortorici, Ornella; Abbasimoshaei, Alireza; Kern, Thorsten Alexander; Schilling, Arndt F.
  Current Directions in Biomedical Engineering 9 (1): 654-657 (2023-09-01)
  Open Access | Verlags DOI
• Biomechanical principles of a permanently durable abdominal wall reconstruction: current status and potential future development
  Nessel, Regine; Lesch, Carolin; Vollmer, Matthias; Kallinowski, Friedrich
  Mini-invasive Surgery 7: 21 (2023)
  Open Access | Verlags DOI
• Cyclic pulse loads pave the road to the GRIP concept in abdominal wall reconstruction
  Lesch, Carolin; Ludwig, Yannique; Kugel, Fabio; Uhr, Katharina; Vollmer, Matthias; Nessel, Regine; Kallinowski, Friedrich
  Mini-invasive Surgery 7: 25 (2023)
  Open Access | Verlags DOI
• Quantification of mechanical properties in long-term in vivo used silicone catheter lines according to DIN 10555-3
  Guerreiro, H.; Schröder, H.; Huber, Gerd; Busch, F.; Sellenschloh, Kay; Adam, Gerhard; Ittrich, Harald; Busch, Jasmin D.
  Clinical Biomechanics 107: 106015 (2023-07)
  Verlags DOI
• Influence of bone morphology and femur preparation method on the primary stability of hip revision stems
  Konow, Tobias; Schlieker, Peter; Lampe, Frank; Ondruschka, Benjamin; Morlock, Michael; Huber, Gerd
  Journal of Orthopaedic Research 41 (6): 1283-1290 (2023-06)
  Open Access | Verlags DOI
• Clinical assessment of the in vivo behaviour of interfaces between non-articulating implant components concerning the consequences of micro motion or corrosion processes
  Traina, Francesco; Morlock, Michael; Mayer, Richard T.; Hart, Alister
  1st EFORT European Consensus Medical & Scientific Research Requirements for the Clinical Introduction of Artificial Joint Arthroplasty Devices (2023)
  
• Detection of wear/debris complications in total hip and knee arthroplasty at an early follow-up with regard to complementary tests for “silent bone loss” detection and risky modular implants
  Garcia-Rey, Eduardo; Cordero-Ampuero, José; Babis, George; Benazzo, Francesco; Morlock, Michael
  1st EFORT European Consensus Medical & Scientific Research Requirements for the Clinical Introduction of Artificial Joint Arthroplasty Devices (2023)
  
• Endurance habitual and peak loads in hip and knee arthroplasty : review and summary of aspects to be considered
  Morlock, Michael; Kretzer, Jan Philippe; Schierjott, Ronja A.; Traina, Francesco; Larrainzar-Garijo, Ricardo; Duda, Georg; Kaddick, Christian
  1st EFORT European Consensus Medical & Scientific Research Requirements for the Clinical Introduction of Artificial Joint Arthroplasty Devices (2023)
  
• Pre-Clinical Testing in the Field of Arthroplasty: Potentials, Limitations and Demands Regarding Test Methodology
  Cristofolini, Luca; Grupp, Thomas M.; Kaddick, Christian; Morlock, Michael; Ruspi, Maria Luisa; Janssen, Dennis
  1st EFORT European Consensus Medical & Scientific Research Requirements for the Clinical Introduction of Artificial Joint Arthroplasty Devices (2023)
  
• Pre-clinical assessment of the in vivo behaviour of non-articulating Interfaces between implant components concerning the consequences of micro motion or corrosion processes : test methodology, and requirements for testing and characterization of implant modularities
  Kretzer, Jan Philippe; Grupp, Thomas M.; Kaddick, Christian; Mayer, Richard T.; Morlock, Michael
  1st EFORT European Consensus Medical & Scientific Research Requirements for the Clinical Introduction of Artificial Joint Arthroplasty Devices (2023)
  
• Grundlagen des Hüftgelenkersatzes : Biomechanik des Hüftgelenkersatzes
  Morlock, Michael; Claes, Lutz; Decking, Ralf
  In: Carsten Perka, Karl-Dieter Heller (Eds.): AE-Manual der Endoprothetik.- Heidelberg : Springer, 2023
  Verlags DOI
• Impaction procedure influences primary stability of acetabular press-fit components
  Ruhr, Miriam; Huber, Gerd; Niki, Yasaman; Lohner, Larissa; Ondruschka, Benjamin; Morlock, Michael
  The bone & joint journal 105-B (3): 261-268 (2023-03-01)
  Verlags DOI
• Biomechanisch stabile Bauchwand-Rekonstruktion : Schritt für Schritt zum Erfolg
  Kallinowski, Friedrich; Löffler, Thorsten; Rinn, Johannes; Vollmer, Matthias; Görich, Johannes; Wielpütz, Mark Oliver; Nessel, Regine
  Chirurgische Allgemeine Zeitung 24 (Sonderausgabe digital): 12-17 (2023)
  
• Patient-specific miniplates versus patient-specific reconstruction plate: a biomechanical comparison with 3D-printed plates in mandibular reconstruction
  Steffen, Claudius; Sellenschloh, Kay; Willsch, Magdalena; Soares, Ana Prates; Morlock, Michael; Heiland, Max; Kreutzer, Kilian; Huber, Gerd; Rendenbach, Carsten
  Journal of the Mechanical Behavior of Biomedical Materials 140: 105742 (2023-04-01)
  Verlags DOI
• Standard- und Spezialinlays in primärer Hüftendoprothetik : Aktuelle Studien- und Umfrageergebnisse aus dem Endoprothesenregister Deutschland (EPRD)
  Krull, Paula; Steinbrück, Arnd; Grimberg, Alexander W.; Melsheimer, Oliver; Morlock, Michael; Perka, Carsten
  Die Orthopädie 52 (3): 222-232 (2023)
  Verlags DOI
• Acromioclavicular joint suture button repair leads to coracoclavicular tunnel widening
  Ntalos, Dimitris; Huber, Gerd; Wichern, Y.; Sellenschloh, Kay; Püschel, Klaus; Mader, Konrad; Morlock, Michael; Frosch, Karl-Heinz; Klatte, Till Orla
  Knee Surgery, Sports Traumatology, Arthroscopy 31 (1): 161-168 (2023-01)
  Open Access | Verlags DOI
• Cyclic pulse loads generate the new concept in abdominal wall reconstruction: suture closure
  Lesch, Carolin; Kugel, Fabio; Uhr, Katharina; Vollmer, Matthias; Nessel, Regine; Kallinowski, Friedrich; Fortelny, René
  Mini-invasive Surgery 7: 20 (2023)
  Open Access | Verlags DOI
• Die Rolle von Knochenpartikeln für die Verankerung zementfreier Endoprothesen
  Zobel, Sebastian Manuel
  Shaker 978-3-8440-8914-1: (2023)
  
• Endoprothesenregister Deutschland (EPRD) : Jahresbericht 2023
  Grimberg, Alexander W.; Lützner, Jörg; Melsheimer, Oliver; Morlock, Michael; Steinbrück, Arnd
  Jahresbericht / Endoprothesenregister Deutschland EPRD. Patienteninformation. - Berlin : EPRD Deutsche Endoprothesenregister gGmbH (2023)
  Verlags DOI
• Patientenorientierte Implantatwahl in der Revisionsknieendoprothetik
  Polster, Valerie-Sophie Amber
  Shaker 978-3-8440-9040-6: (2023)
  
• Robuste Implantationsprozesse in der zementfreien Hüftendoprothetik
  Konow, Tobias
  Shaker 978-3-8440-9021-5: (2023)
  

2022

• Influence of acetabular cup thickness on seating and primary stability in total hip arthroplasty
  Ruhr, Miriam; Bätz, Johanna; Püschel, Klaus; Morlock, Michael
  Journal of Orthopaedic Research 40 (9): 2139-2146 (2022-09)
  Open Access | Verlags DOI
• Standardized suturing can prevent slackening or bursting suture lines in midline abdominal incisions and defects
  Lesch, Carolin; Uhr, Katharina; Vollmer, Matthias; Raschidi, R.; Nessel, Regine; Kallinowski, Friedrich
  Hernia 26 (6): 1611-1623 (2022)
  Open Access | Verlags DOI
• Modified acetabular component liner designs are not superior to standard liners at reducing the risk of revision : an analysis of 151,096 cementless total hip arthroplasties from the German Arthroplasty Registry
  Krull, Paula; Steinbrück, Arnd; Grimberg, Alexander W.; Melsheimer, Oliver; Morlock, Michael; Perka, Carsten
  The bone & joint journal 104-B (7): 801-810 (2022-07-01)
  Verlags DOI
• Densification of cancellous bone with autologous particles can enhance the primary stability of uncemented implants by increasing the interface friction coefficient
  Zobel, Sebastian Manuel; Ruhr, Miriam; Neumann, Fenna; Huber, Gerd; Morlock, Michael
  Journal of biomechanics 139: 111149 (2022-06-01)
  Verlags DOI
• Explant analysis and implant registries are both needed to further improve patient safety
  Morlock, Michael; Gomez-Barrena, Enrique; Wirtz, Dieter Christian; Hart, Alister; Kretzer, Jan Philippe
  EFORT Open Reviews 7 (6): 344-348 (2022)
  Open Access | Verlags DOI
• Which length should the neck segment of modular revision stems have?
  Huber, Gerd; Morlock, Michael
  Clinical Biomechanics 94: 105286 (2022-04)
  Verlags DOI
• Variability in femoral preparation and implantation between surgeons using manual and powered impaction in total hip arthroplasty
  Konow, Tobias; Bätz, Johanna; Beverland, David E.; Board, Tim N.; Lampe, Frank; Püschel, Klaus; Morlock, Michael
  Arthroplasty Today 14: 14-21 (2022-04-01)
  Open Access | Verlags DOI
• Fixation in Joint Arthroplasty
  Morlock, Michael; Fischer, Sarah; Lieb, Elke
  n: Hansen, E., Kühn, KD. (eds) Essentials of Cemented Knee Arthroplasty. Springer, Berlin, Heidelberg (2022)
  Verlags DOI

2021

• Primary and recurrent repair of incisional hernia based on biomechanical considerations to avoid mesh-related complications
  Nessel, Regine; Löffler, Thorsten; Rinn, Johannes; Lösel, Philipp; Voß, Samuel; Heuveline, Vincent; Vollmer, Matthias; Görich, Johannes; Ludwig, Yannique; Al-Hileh, Luai; Kallinowski, Friedrich
  Frontiers in Surgery 8 : 764470 (2021-12-15)
  Open Access | Verlags DOI
• Spongiosaplastik in der Endoprothetik: Einfluss von Knochenpartikeln auf die Primärstabilität zementfreier Implantate
  Stiller, Fenja
  Technische Universität Hamburg (2021)
  Open Access
• Biomechanical Influences on mesh-related complications in incisional hernia repair
  Kallinowski, Friedrich; Ludwig, Yannique; Gutjahr, Dominik; Gerhard, Christian; Schulte-Hörmann, Hannah; Krimmel, Lena; Lesch, Carolin; Uhr, Katharina; Lösel, Philipp; Voß, Samuel; Heuveline, Vincent; Vollmer, Matthias; Görich, Johannes; Nessel, Regine
  Frontiers in Surgery 8: 763957 (2021-10-29)
  Open Access | Verlags DOI
• Osteolysis following PE wear of a Hastings head on a monoblock hip stem
  Fischer, Sarah; Polster, Valerie-Sophie Amber; Ruhr, Miriam; Hube, Robert; Morlock, Michael
  Case Reports in Orthopedics : 9989395 (2021)
  Open Access | Verlags DOI
• Experimental validation of the abrasive wear stage of the gross taper failure mechanism in total hip arthroplasty
  Polster, Valerie-Sophie Amber; Fischer, Sarah; Steffens, Jason; Morlock, Michael; Kaddick, Christian
  Medical Engineering and Physics 95: 25-29 (2021-09)
  Verlags DOI
• Lag-screw osteosynthesis in thoracolumbar pincer fractures
  Auerswald, Marc; Messer-Hannemann, Philipp; Sellenschloh, Kay; Wahlefeld, Jan; Püschel, Klaus; Hirschfeld Araujo, Sven; Morlock, Michael; Schulz, Arndt-Peter; Huber, Gerd
  Global Spine Journal 11 (7): 1089-1098 (2021-09)
  Open Access | Verlags DOI
• Impact of Screw Diameter on Pedicle Screw Fatigue Strength - A Biomechanical Evaluation
  Viezens, Lennart; Sellenschloh, Kay; Püschel, Klaus; Morlock, Michael; Lehmann, Wolfgang; Huber, Gerd; Weiser, Lukas
  World Neurosurgery 152: e369-e376 (2021-08)
  Verlags DOI
• All-suture anchor pullout results in decreased bone damage and depends on cortical thickness
  Ntalos, Dimitris; Huber, Gerd; Sellenschloh, Kay; Saito, Hiroaki; Püschel, Klaus; Morlock, Michael; Frosch, Karl-Heinz; Klatte, Till Orla
  Knee Surgery, Sports Traumatology, Arthroscopy 29 (7): 2212-2219 (2021-07)
  Open Access | Verlags DOI
• Rescue augmentation: increased stability in augmentation after initial loosening of pedicle screws
  Weiser, Lukas; Huber, Gerd; Sellenschloh, Kay; Püschel, Klaus; Morlock, Michael; Viezens, Lennart; Lehmann, Wolfgang
  Global Spine Journal 11 (5): 679-685 (2021-06)
  Open Access | Verlags DOI
• The grip concept of incisional hernia repair - dynamic bench test, CT abdomen with valsalva and 1-year clinical results
  Kallinowski, Friedrich; Gutjahr, Dominik; Harder, Felix; Sabagh, Mohammad; Ludwig, Yannique; Lozanovski, Vladimir J.; Löffler, Thorsten; Rinn, Johannes; Görich, Johannes; Grimm, Annette; Vollmer, Matthias; Nessel, Regine
  Frontiers in Surgery 8: 602181 (2021-04-14)
  Open Access | Verlags DOI
• Factors influencing periprosthetic femoral fracture risk
  Konow, Tobias; Bätz, Johanna; Melsheimer, Oliver; Grimberg, Alexander W.; Morlock, Michael
  The bone & joint journal 103-B (4): 650-658 (2021-04-01)
  Verlags DOI
• Diskrete-Elemente-Methode in der Endoprothetik - eine Pilotstudie zur numerischen Simulation von Knochenpartikeln
  Glismann, Katja
  Technische Universität Hamburg (2021)
  Open Access
• Automated age estimation of young individuals based on 3D knee MRI using deep learning
  Auf der Mauer, Markus; Jopp-van Well, Eilin; Herrmann, Jochen; Groth, Michael; Morlock, Michael; Maas, Rainer; Säring, Dennis
  International Journal of Legal Medicine 135 (2): 649-663 (2021-03)
  Open Access | Verlags DOI
• Biomechanical analysis of anterior pelvic ring fractures with intact peripelvic soft tissues: a cadaveric study
  Fensky, Florian; Weiser, Lukas; Sellenschloh, Kay; Vollmer, Matthias; Hartel, Maximilian; Morlock, Michael; Püschel, Klaus; Rueger, Johannes M.; Lehmann, Wolfgang
  European Journal of Trauma and Emergency Surgery 1 (47): 187-193 (2021-02)
  Verlags DOI
• Biomechanics applied to incisional hernia repair – Considering the critical and the gained resistance towards impacts related to pressure
  Kallinowski, Friedrich; Ludwig, Y.; Löffler, Thorsten; Vollmer, Matthias; Lösel, Philipp; Voß, S.; Görich, Johannes; Heuveline, Vincent; Nessel, Regine
  Clinical Biomechanics (82): 105253 (2021-02)
  Verlags DOI
• Cortical threaded pedicle screw improves fatigue strength in decreased bone quality
  Weiser, Lukas; Sellenschloh, Kay; Püschel, Klaus; Morlock, Michael; Viezens, Lennart; Lehmann, Wolfgang; Huber, Gerd
  European Spine Journal 1 (30): 128-135 (2021-01)
  Open Access | Verlags DOI
• Sicherheit bei der Implantation keramischer Endoprothesenkomponenten
  Gührs, Julian
  Shaker 978-3-8440-7786-5: (2021)
  

2020

• Taper corrosion: a complication of total hip arthroplasty
  Morlock, Michael; Hube, Robert; Wassilew, Georgi Iwan; Prange, Felix; Huber, Gerd; Perka, Carsten
  EFORT Open Reviews 11 (5): 776-784 (2020)
  Open Access | Verlags DOI
• Biomechanical comparison of titanium miniplates versus a variety of CAD/CAM plates in mandibular reconstruction
  Steffen, Claudius; Sellenschloh, Kay; Vollmer, Matthias; Morlock, Michael; Heiland, Max; Huber, Gerd; Rendenbach, Carsten
  Journal of the Mechanical Behavior of Biomedical Materials (111): 104007 (2020-11)
  Verlags DOI
• Ausriss von All-suture-Ankern verursacht geringere Knochenschäden und ist von der Kortikalisdicke abhängig [All-suture anchor pullout results in decreased bone damage and depends on cortical thickness]
  Ntalos, Dimitris; Huber, Gerd; Sellenschloh, Kay; Saito, Hiroaki; Püschel, Klaus; Morlock, Michael; Frosch, Karl-Heinz; Klatte, Till Orla
  Arthroskopie 5 (33): 378-385 (2020-09-01)
  Verlags DOI
• Do SiNx coatings bear the potential to reduce the risk of micromotion in modular taper junctions?
  Haschke, Henning; Falkenberg, Adrian; Morlock, Michael; Huber, Gerd
  Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 9 (234): 897-908 (2020-09-01)
  Verlags DOI
• Biomechanical comparison of polylactide-based versus titanium miniplates in mandible reconstruction in vitro
  Steffen, Claudius; Sellenschloh, Kay; Polster, Valerie-Sophie Amber; Heyland, Mark; Vollmer, Matthias; Morlock, Michael; Heiland, Max; Huber, Gerd; Rendenbach, Carsten
  Journal of Stomatology, Oral and Maxillofacial Surgery 121 (4): 377-382 (2020-09)
  Verlags DOI
• Metallionenfreisetzung nach Hüft- und Kniegelenkendoprothetik – Mechanismen, biologische Wirkungen und notwendige Diagnostik
  Lützner, Jörg; Günther, Klaus-Peter; Postler, Anne; Morlock, Michael
  Zeitschrift fur Orthopadie und Unfallchirurgie 4 (158): 369-382 (2020-08-01)
  Verlags DOI
• Gross Stem Taper Failure with Head Dissociation in a Very Active Patient with an Uncemented Femoral Stem
  Polster, Valerie-Sophie Amber; Hube, Robert; Morlock, Michael
  JBJS Case Connector 3 (10): e19.00662 (2020-07-01)
  Verlags DOI
• Fatigue strength reduction of Ti–6Al–4V titanium alloy after contact with high-frequency cauterising instruments
  Zobel, Sebastian Manuel; Morlock, Michael; Huber, Gerd
  Medical Engineering and Physics (81): 58-67 (2020-07)
  Verlags DOI
• Time-dependent Viscoelastic Response of Acetabular Bone and Implant Seating during Dynamic Implantation of Press-fit Cups
  Messer-Hannemann, Philipp; Weyer, Hannah; Campbell, Graeme Michael; Morlock, Michael
  Medical Engineering and Physics (81): 68-76 (2020-07)
  Verlags DOI
• Comparative biomechanical in vitro study of different modular total knee arthroplasty revision stems with bone defects
  Guttowski, Dario; Polster, Valerie-Sophie Amber; Huber, Gerd; Morlock, Michael; Püschel, Klaus; Nüchtern, Jakob Valentin
  Journal of Arthroplasty 11 (35): 3318-3325 (2020)
  Verlags DOI
• Towards automated age estimation of young individuals : a new computer-based approach using 3D knee MRI
  Auf der Mauer, Markus
  Zuerst veröff.: ISBN 978-3-8440-7400-0 (2020)
  Open Access | Verlags DOI
• Competitive binding of Bilirubin and Fatty Acid on Serum Albumin Affects Wear of UHMWPE
  Fullam, Spencer; He, Jade; Scholl, Caroline S.; Schmid, Thomas M.; Wimmer, Markus A.
  Lubricants 8 (5): 53 (2020)
  Open Access | Verlags DOI
• Machine learning in cardiac CT image reconstruction
  Loßau, Tanja
  Zuerst veröff.: ISBN 978-3-8440-7353-9, Shaker, 2020
  Open Access
• Contact conditions for total hip head-neck modular taper junctions with microgrooved stem tapers
  Bechstedt, Maren; Gustafson, Jonathan A.; Mell, Steven P.; Gührs, Julian; Morlock, Michael; Levine, Brett R.; Lundberg, Hannah J.
  Journal of Biomechanics (103): 109689 (2020-04-16)
  Verlags DOI
• Osteoidosis leads to altered differentiation and function of osteoclasts
  Grünherz, Lisanne; Prein, Carina; Winkler, Thomas; Kirsch, Manuela; Hopfner, Ursula; Streichert, Thomas; Clausen-Schaumann, Hauke; Zustin, Jozef; Kirchhof, Kristin; Morlock, Michael M.; Machens, Hans-Günther; Schilling, Arndt Friedrich
  Journal of Cellular and Molecular Medicine 10 (24): 5665-5674 (2020)
  Open Access | Verlags DOI
• Learning metal artifact reduction in cardiac CT images with moving pacemakers
  Lossau, Tanja; Nickisch, Hannes; Wissel, Tobias; Morlock, Michael; Grass, Michael
  Medical Image Analysis (61): 101655 (2020-04)
  Verlags DOI
• Reduced cement volume does not affect screw stability in augmented pedicle screws
  Weiser, Lukas; Sellenschloh, Kay; Püschel, Klaus; Morlock, Michael; Viezens, Lennart; Lehmann, Wolfgang; Huber, Gerd
  European Spine Journal 6 (29): 1297-1303 (2020-06-01)
  Open Access | Verlags DOI
• How to proceed with asymptomatic modular dual taper hip stems in the case of acetabular revision
  Grupp, Thomas M.; Baxmann, Marc; Jansson, Volkmar; Windhagen, Henning; Heller, Karl-Dieter; Morlock, Michael M.; Knaebel, Hanns-Peter
  Materials 13 (5): 1098 (2020)
  Open Access | Verlags DOI
• The influence of broach design on bone friction and osseodensification in total hip arthroplasty
  Bätz, Johanna; Syrigos, Stefan; Vorbeck, Marius; Prüch, Elena; Campbell, Graeme Michael; Morlock, Michael
  Clinical Biomechanics (73): 234-240 (2020-03)
  Verlags DOI
• Micromotion at the head-stem taper junction of total hip prostheses is influenced by prosthesis design-, patient- and surgeon-related factors
  Falkenberg, Adrian; Biller, Sara; Morlock, Michael; Huber, Gerd
  Journal of Biomechanics (98): 109424 (2020-01-02)
  Verlags DOI
• Adapter sleeves are essential for ceramic heads in hip revision surgery
  Falkenberg, Adrian; Dickinson, Emilie; Morlock, Michael
  Clinical Biomechanics (71): 1-4 (2020-01)
  Verlags DOI
• Initiale Verankerungsfestigkeit zementfreier Hüftpfannen
  Messer-Hannemann, Philipp
  Shaker Verlag (2020)
  
• Kompromiss Konusverbindung : eine mehrachsige Betrachtung modularer Hüftendoprothesen
  Haschke, Henning
  Shaker 978-3-8440-7634-9: (2020)
  
• Patientenorientierte Implantation zementfreier Hüftendoprothesen
  Bätz, Johanna
  Shaker Verlag (2020)
  

2019

• The hammer: instrument of Thor (and orthopaedic surgeons)
  Matar, Hosam E.; Kay, Peter; Morlock, Michael; Board, Tim N.
  BMJ (Clinical research ed.) (367): l6648 (2019-12-16)
  Verlags DOI
• Biomechanical analysis of conventional anchor revision after all-suture anchor pullout: a human cadaveric shoulder model
  Ntalos, Dimitris; Huber, Gerd; Sellenschloh, Kay; Briem, Daniel; Püschel, Klaus; Morlock, Michael; Frosch, Karl-Heinz; Thiesen, Darius M.; Klatte, Till Orla
  Journal of Shoulder and Elbow Surgery 12 (28): 2433-2437 (2019-12)
  Verlags DOI
• Conventional rotator cuff versus all-suture anchors — a biomechanical study focusing on the insertion angle in an unlimited cyclic model
  Ntalos, Dimitris; Sellenschloh, Kay; Huber, Gerd; Briem, Daniel; Püschel, Klaus; Morlock, Michael; Frosch, Karl-Heinz; Fensky, Florian; Klatte, Till Orla
  PLoS ONE 11 (14): e0225648 (2019)
  Open Access | Verlags DOI
• Motion estimation and correction in cardiac CT angiography images using convolutional neural networks
  Lossau, Tanja; Nickisch, Hannes; Wissel, Tobias; Bippus, Rolf; Schmitt, Holger; Morlock, Michael; Grass, Michael
  Computerized Medical Imaging and Graphics (76): 101640 (2019-09)
  Verlags DOI
• Deformation of acetabular press-fit cups: influence of design and surgical factors
  Messer-Hannemann, Philipp; Campbell, Graeme Michael; Morlock, Michael
  Clinical Biomechanics (69): 96-103 (2019-10)
  Open Access | Verlags DOI
• Automated segmentation of the knee for age assessment in 3D MR images using convolutional neural networks
  Pröve, Paul Louis; Jopp-van Well, Eilin; Stanczus, Ben; Morlock, Michael; Herrmann, Jochen; Groth, Michael; Säring, Dennis; Maur, Matthias auf der
  International Journal of Legal Medicine 4 (133): 1191-1205 (2019-07-01)
  Verlags DOI
• Evaluation of the capability of the simulated dual energy X-ray absorptiometry-based two-dimensional finite element models for predicting vertebral failure loads
  Lu, Yongtao; Zhu, Yifan; Krause, Matthias; Huber, Gerd; Li, Junyan
  Medical Engineering and Physics (69): 43-49 (2019-07)
  Verlags DOI
• Influence of flexural rigidity on micromotion at the head-stem taper interface of modular hip prostheses
  Haschke, Henning; Konow, Tobias; Huber, Gerd; Morlock, Michael
  Medical engineering & physics (68): 1-10 (2019-06)
  Open Access | Verlags DOI
• Increasing hernia size requires higher GRIP values for a biomechanically stable ventral hernia repair
  Kallinowski, Friedrich; Gutjahr, Dominik; Vollmer, Matthias; Harder, Felix; Nessel, Regine
  Annals of Medicine and Surgery (42): 1-6 (2019-06)
  Open Access | Verlags DOI
• Total hip arthroplasty in young patients : Bearings and custom-made prostheses
  Benignus, Christian; Morlock, Michael; Beckmann, Johannes
  Der Orthopäde 4 (48): 292-299 (2019-04)
  Verlags DOI
• Effect of cavity preparation and bone mineral density on bone-interface densification and bone-implant contact during press-fit implantation of hip stems
  Bätz, Johanna; Messer-Hannemann, Philipp; Lampe, Frank; Klein, Anke; Püschel, Klaus; Morlock, Michael; Campbell, Graeme Michael
  Journal of orthopaedic research 7 (37) : 1580-1589 (2019-03-25)
  Open Access | Verlags DOI
• Impact of stem taper damage on the fracture strength of ceramic heads with adapter sleeves
  Dickinson, Emilie; Sellenschloh, Kay; Morlock, Michael
  Clinical biomechanics (Bristol, Avon) (63): 193-200 (2019-03-20)
  Verlags DOI
• The influence of cavity preparation and press-fit cup implantation on restoring the hip rotation center
  Messer-Hannemann, Philipp; Bätz, Johanna; Lampe, Frank; Klein, Anke; Püschel, Klaus; Campbell, Graeme Michael; Morlock, Michael
  Clinical biomechanics (Bristol, Avon) (63): 185-192 (2019-03-20)
  Verlags DOI
• Determination of local micromotion at the stem-neck taper junction of a bi-modular total hip prosthesis design
  Falkenberg, Adrian; Drummen, Paul; Morlock, Michael; Huber, Gerd
  Medical engineering & physics (65): 31-38 (2019-03)
  Verlags DOI
• Patient specific glass fiber reinforced composite versus titanium plate: A comparative biomechanical analysis under cyclic dynamic loading
  Rendenbach, Carsten; Steffen, Claudius; Sellenschloh, Kay; Heyland, Mark; Morlock, Michael; Toivonen, Joonas; Moritz, Niko; Smeets, Ralf; Heiland, Max; Vallittu, Pekka K; Huber, Gerd
  Journal of the mechanical behavior of biomedical materials (91): 212-219 (2019-03)
  Verlags DOI
• Update on the impact of type 2 diabetes mellitus on bone metabolism and material properties
  Picke, Ann-Kristin; Campbell, Graeme Michael; Napoli, Nicola; Hofbauer, Lorenz C.; Rauner, Martina
  Endocrine Connections 3 (8): R55-R70 (2019-01-03)
  Open Access | Verlags DOI
• Developmental transformation and reduction of connective cavities within the subchondral bone
  Taheri, Shahed; Winkler, Thomas; Schenk, Lia Sabrina; Neuerburg, Carl; Baumbach, Sebastian Felix; Zustin, Jozef; Lehmann, Wolfgang; Schilling, Arndt Friedrich
  International Journal of Molecular Sciences 3 (20): 770 (2019)
  Open Access | Verlags DOI
• Motion artifact recognition and quantification in coronary CT angiography using convolutional neural networks
  Lossau, Tanja; Nickisch, Hannes; Wissel, Tobias; Bippus, Rolf; Schmitt, Holger; Morlock, Michael; Grass, Michael
  Medical image analysis (52): 68-79 (2019-02)
  Verlags DOI
• Transferrin receptor 2 controls bone mass and pathological bone formation via BMP and Wnt signalling
  Rauner, Martina; Baschant, Ulrike; Roetto, Antonella; Pellegrino, Rosa Maria; Rother, Sandra; Salbach-Hirsch, Juliane; Weidner, Heike; Hintze, Vera; Campbell, Graeme Michael; Petzold, Andreas; Lemaitre, Regis; Henry, Ian; Bellido, Teresita; Theurl, Igor; Altamura, Sandro; Colucci, Silvia; Muckenthaler, Martina U.; Schett, Georg; Komla-Ebri, Davide S. K.; Bassett, J. H. Duncan; Williams, Graham R.; Platzbecker, Uwe; Hofbauer, Lorenz C.
  Nature Metabolism 1 (1): 111-124 (2019-01-01)
  Verlags DOI
• Biomechanical evaluation of location and mode of failure in three screw fixations for a comminuted transforaminal sacral fracture model
  Crist, Brett D.; Pfeiffer, Ferris M.; Khazzam, Michael S.; Kueny, Rebecca A.; Della Rocca, Gregory J.; Carson, William L.
  Journal of Orthopaedic Translation (16): 102-111 (2019-01)
  Open Access | Verlags DOI
• A calcar collar is protective against early periprosthetic femoral fracture around cementless femoral components in primary total hip arthroplasty: A registry study with biomechanical validation
  Lamb, Jonathan; van Duren, Bernard H.; Redmond, Anthony C.; Pandit, Hemant G.; Bätz, Johanna; Messer-Hannemann, Philipp; Morlock, Michael; Adekanmbi, Isaiah; West, Robert M.
  Bone and Joint Journal 7 (101 B): 779-786 (2019)
  Verlags DOI
• Dynamic pacemaker artifact removal (DyPAR) from CT data using CNNs
  Loßau, Tanja; Nickisch, Hannes; Wissel, Tobias; Hakmi, Samer; Spink, Clemens; Morlock, Michael; Graß, Michael
  Proceedings of Machine Learning Research 102: 347-357 (2019)
  
• Einblick in die Konusverbindung : ein Beitrag zur Vermeidung lokaler Mikrobewegungen bei modularen Hüftendoprothesen
  Falkenberg, Adrian
  Shaker, Düren (2019)
  
• Versagensanalyse modularer Revisionsendoprothesen
  Krull, Annika
  Shaker Verlag, Düren (2019)
  

2018

• Thy-1 deficiency augments bone loss in obesity by affecting bone formation and resorption
  Picke, Ann-Kristin; Campbell, Graeme Michael; Schmidt, Felix N.; Busse, Björn; Rauner, Martina; Simon, Jan C.; Anderegg, Ulf; Hofbauer, Lorenz C.; Saalbach, Anja
  Frontiers in cell and developmental biology OCT (6): 127 (2018-10-02)
  Open Access | Verlags DOI
• Influence of application parameters of ultrasonic-assisted bone instruments on the tear force of a substitute material for spinal dura mater
  Foelkel, Marie C.; Herzog, Vitali; Meier, Markus; Morlock, Michael
  Current Directions in Biomedical Engineering 1 (4): 611-614 (2018-09)
  Open Access | Verlags DOI
• Variogram-based evaluations of DXA correlate with vertebral strength, but do not enhance the prediction compared to aBMD alone
  Dong, Xuanliang Neil; Lu, Yongtao; Krause, Matthias; Huber, Gerd; Chevalier, Yan; Leng, Huijie; Maquer, Ghislain
  Journal of Biomechanics (77): 223-227 (2018-08-22)
  Verlags DOI
• Thy-1 (CD90) promotes bone formation and protects against obesity
  Picke, Ann-Kristin; Campbell, Graeme Michael; Blüher, Matthias; Krügel, Ute; Schmidt, Felix N.; Tsourdi, Elena; Winzer, Maria; Rauner, Martina; Vukicevic, Vladimir; Busse, Björn; Salbach-Hirsch, Juliane; Tuckermann, Jan P.; Simon, Jan C.; Anderegg, Ulf; Hofbauer, Lorenz C.; Saalbach, Anja
  Science Translational Medicine 453 (10): eaao6806 (2018-08-08)
  Verlags DOI
• Time to augment?! Impact of cement augmentation on pedicle screw fixation strength depending on bone mineral density
  Weiser, Lukas; Huber, Gerd; Sellenschloh, Kay; Viezens, Lennart; Püschel, Klaus; Morlock, Michael; Lehmann, Wolfgang
  European spine journal 8 (27): 1964-1971 (2018)
  Verlags DOI
• Vibro-acoustic and nonlinear analysis of cadavric femoral bone impaction in cavity preparations
  Oberst, Sebastian; Bätz, Johanna; Campbell, Graeme Michael; Lampe, Frank; Lai, Joseph C. S.; Hoffmann, Norbert; Morlock, Michael
  International Journal of Mechanical Sciences 144 (): 739-745 (2018-08)
  Verlags DOI
• Analysis of surface-to-surface distance mapping during three-dimensional motion at the ankle and subtalar joints
  Siegler, Sorin; Konow, Tobias; Belvedere, Claudio; Ensini, Andrea; Kulkarni, Rewati; Leardini, Alberto
  Journal of Biomechanics (76): 204-211 (2018-07-25)
  Verlags DOI
• Head taper corrosion causing head bottoming out and consecutive gross stem taper failure in total hip arthroplasty
  Morlock, Michael; Dickinson, Emilie C.; Günther, Klaus-Peter; Bünte, Dennis; Polster, Valerie
  The Journal of arthroplasty 11 (33): 3581-3590 (2018-11)
  Open Access | Verlags DOI
• Transcatheter mitral valve implantation: supra-annular and subvalvular fixation techniques
  Loger, Klaas; Lutter, Georg; Huenges, Katharina; Frank, Derk; Groß, Justus; Cremer, Jochen; Attmann, Tim; Morlock, Michael; Pokorny, Saskia
  European Journal of Cardio-thoracic Surgery 6 (54): 1013-1021 (2018)
  Verlags DOI
• Test method for mechanical properties of implantable catheters according to DIN 10555-3
  Busch, Jasmin D.; Schröder, Henning; Sellenschloh, Kay; Adam, Gerhard; Ittrich, Harald; Huber, Gerd
  Journal of the Mechanical Behavior of Biomedical Materials (82): 183-186 (2018-06)
  Verlags DOI
• Factors influencing taper failure of modular revision hip stems
  Krull, Annika; Morlock, Michael; Bishop, Nicholas
  Medical engineering & physics (54): 65-73 (2018-04)
  Open Access | Verlags DOI
• Automated segmentation of bones for the age assessment in 3D MR images using convolutional neural networks
  Auf der Mauer, Markus; Pröve, Paul Louis; Jopp-van Well, Eilin; Herrmann, Jochen; Groth, Michael; Morlock, Michael; Stanczus, Ben; Säring, Dennis
  Workshop on Bildverarbeitung fur die Medizin (2018)
  Verlags DOI
• Maximizing the fixation strength of modular components by impaction without tissue damage
  Krull, Annika; Morlock, Michael; Bishop, Nicholas
  Bone & joint research 2 (7): 196-204 (2018-02-24)
  Open Access | Verlags DOI
• Vibro-acoustic and nonlinear analysis of cadavric femoral bone impaction in cavity preparations
  Oberst, Sebastian; Bätz, Johanna; Campbell, Graeme Michael; Lampe, Frank; Lai, Joseph C. S.; Hoffmann, Norbert; Morlock, Michael
  International Conference on Engineering Vibration (ICoEV 2017)
  Open Access | Verlags DOI
• Novel stent design for transcatheter mitral valve implantation
  Loger, Klaas; Pokorny, Saskia; Schaller, Tim; Haben, Irma; Frank, Derk; Lutter, Georg
  Interactive Cardiovascular and Thoracic Surgery 2 (26): 190-195 (2018-02-01)
  Verlags DOI
• Assessing the GRIP of Ventral Hernia Repair: How to Securely Fasten DIS Classified Meshes
  Kallinowski, Friedrich; Harder, Felix; Gutjahr, Dominik; Raschidi, R.; Silva, T. G.; Vollmer, Matthias; Nessel, Regine
  Frontiers in surgery (4): 78 (2018-01-19)
  Open Access | Verlags DOI
• Deep-learning-based CT motion artifact recognition in coronary arteries
  Elss, Tanja; Nickisch, Hannes; Wissel, T.; Schmitt, H.; Vembar, M.; Morlock, Michael; Grass, Michael
  Progress in Biomedical Optics and Imaging - Proceedings of SPIE (10574): 1057416 (2018)
  Verlags DOI
• Entwicklung von Mitralklappenstents zur katheterbasierten Implantation in das schlagende Herz und in vivo Evaluation im porcinen Großtiermodell
  Pokorny, Saskia
  Düren: Shaker Verlag (2018)
  
• Motion compensated reconstruction of the aortic valve for computed tomography
  Elss, Tanja; Bippus, R.; Schmitt, H.; Ivanc, T.; Morlock, Michael; Grass, Michael
  Progress in Biomedical Optics and Imaging - Proceedings of SPIE (10573): 1057331 (2018)
  Verlags DOI

2017

• Biomechanical Evaluation of the Fatigue Performance, the Taper Corrosion and the Metal Ion Release of a Dual Taper Hip Prosthesis under Physiological Environmental Conditions
  Baxmann, Marc; Pfaff, A. M.; Schilling, C.; Grupp, Thomas M.; Morlock, Michael
  Biotribology (12): 1-7 (2017-12)
  Verlags DOI
• Insufficient stability of pedicle screws in osteoporotic vertebrae: biomechanical correlation of bone mineral density and pedicle screw fixation strength
  Weiser, Lukas; Huber, Gerd; Sellenschloh, Kay; Viezens, Lennart; Püschel, Klaus; Morlock, Michael; Lehmann, Wolfgang
  European Spine Journal 11 (26): 2891-2897 (2017-11-01)
  Verlags DOI
• CAD–CAM plates versus conventional fixation plates for primary mandibular reconstruction: A biomechanical in vitro analysis
  Rendenbach, Carsten; Sellenschloh, Kay; Gerbig, Lucca; Morlock, Michael; Beck-Broichsitter, Benedicta; Smeets, Ralf; Heiland, Max; Huber, Gerd; Hanken, Henning
  Journal of Cranio-Maxillofacial Surgery 11 (45): 1878-1883 (2017-11)
  Verlags DOI
• The Influence of Contamination and Cleaning on the Strength of Modular Head Taper Fixation in Total Hip Arthroplasty
  Krull, Annika; Morlock, Michael; Bishop, Nicholas
  Journal of Arthroplasty 10 (32): 3200-3205 (2017-10)
  Verlags DOI
• Mechanical Stability of the Taper Connection of Large Metal Femoral Heads With Adapter Sleeves in Total Hip Arthroplasty Analyzed Using Explicit Finite Element Simulations
  Vogel, Danny; Falkenberg, Adrian; Bierbaum, Sarah; Schulze, Christian; Bader, Rainer; Kluess, Daniel
  Journal of Arthroplasty 8 (32): 2580-2586 (2017-08)
  Verlags DOI
• The taper corrosion pattern observed for one bi-modular stem design is related to geometry-determined taper mechanics
  Bünte, Dennis; Bryant, Michael; Ward, Michael; Neville, Anne; Morlock, Michael; Huber, Gerd
  Medical Engineering and Physics (46): 79-88 (2017-08)
  Verlags DOI
• Acromioclavicular joint dislocations: coracoclavicular reconstruction with and without additional direct acromioclavicular repair
  Weiser, Lukas; Nüchtern, Jakob Valentin; Sellenschloh, Kay; Püschel, Klaus; Morlock, Michael; Rueger, Johannes M.; Hoffmann, Michael; Lehmann, Wolfgang; Großterlinden, Lars Gerhard
  Knee Surgery, Sports Traumatology, Arthroscopy 7 (25): 2025-2031 (2017-07-01)
  Verlags DOI
• Influence of the compliance of a patient's body on the head taper fixation strength of modular hip implants
  Krull, Annika; Bishop, Nicholas; Steffen, Niels M.; Lampe, Frank; Püschel, Klaus; Morlock, Michael
  Clinical Biomechanics (46): 1-5 (2017-07-01)
  Verlags DOI
• Skeletal assessment with finite element analysis: Relevance, pitfalls and interpretation
  Campbell, Graeme Michael; Glüer, Claus Christian
  Current Opinion in Rheumatology 4 (29): 402-409 (2017-07-01)
  Verlags DOI
• Bridging with reduced overlap: fixation and peritoneal grip can prevent slippage of DIS class A meshes
  Kallinowski, Friedrich; Harder, Felix; Silva, T. G.; Mahn, Axel; Vollmer, Matthias
  Hernia 3 (21): 455-467 (2017-06-01)
  Verlags DOI
• Wirbelkörperfrakturen und Osteopenie: Augmentieren oder langstreckig? Vertebral body fractures and osteopenia: augmentation or lengthening?
  Weiser, Lukas; Viezens, Lennart; Huber, Gerd; Lehmann, Wolfgang
  Trauma und Berufskrankheit 2 (19): 80-85 (2017-06-01)
  Verlags DOI
• Surface and subsurface changes as a result of tribocorrosion at the stem-neck interface of bi-modular prosthesis
  Bryant, Michael; Bünte, Dennis; Oladokun, A.; Ward, Michael; Huber, Gerd; Morlock, Michael; Neville, Anne
  Biotribology (10): 1-16 (2017-06)
  Verlags DOI
• Multiscale modeling of bone healing : toward a systems biology approach
  Borgiani, Edoardo; Duda, Georg; Checa Esteban, Sara
  Frontiers in Physiology 8 (5): 287 (2017)
  Verlags DOI
• Hybrid instrumentation in lumbar spinal fusion : a biomechanical evaluation of three different Instrumentation techniques
  Obid, Peter; Danyali, Reza; Kueny, Rebecca; Huber, Gerd; Reichl, Michael; Richter, Alexander; Niemeyer, Thomas; Morlock, Michael; Püschel, Klaus; Übeyli, Hüseyin
  Global spine journal 1 (7): 47-53 (2017)
  Open Access | Verlags DOI
• Cemented tibial tray fixation
  Nagel, Katrin
  Open Access
• Tracking the progression of osteolytic and osteosclerotic lesions in mice using serial in vivo μCT: applications to the assessment of bisphosphonate treatment efficacy
  Campbell, Graeme Michael; Tower, Robert J.; Damm, Timo; Kneissl, Philipp; Rambow, Anna C.; Schem, Christian; Tiwari, Sanjay; Glüer, Claus Christian
  Journal of Bone and Mineral Research 3 (33): 410-418 (2018-03)
  Verlags DOI
• Parallel N- and C-Terminal Truncations Facilitate Purification and Analysis of a 155-kDa Cold-Adapted Type-I Pullulanase
  Elleuche, Skander; Krull, Annika; Lorenz, Ute; Antranikian, Garabed
  Protein Journal 1 (36): 56-63 (2017)
  Verlags DOI
• Corrosion of the Head-Stem Taper Junction—Are We on the Verge of an Epidemic?: Review Article
  Morlock, Michael; Bünte, Dennis; Gührs, Julian; Bishop, Nicholas
  HSS Journal 1 (13): 42-49 (2017-02-01)
  Verlags DOI
• The Influence of Cement Morphology Parameters on the Strength of the Cement-Bone Interface in Tibial Tray Fixation
  Nagel, Katrin; Bishop, Nicholas; Schlegel, Ulf J.; Püschel, Klaus; Morlock, Michael
  Journal of Arthroplasty 2 (32): 563-569.e1 (2017-02-01)
  Verlags DOI
• Assessment of Bone Fragility in Patients With Multiple Myeloma Using QCT-Based Finite Element Modeling
  Campbell, Graeme Michael; Peña, Jaime A.; Giravent, Sarah; Thomsen, Felix Sebastian Leo; Damm, Timo; Glüer, Claus Christian; Borggrefe, Jan
  Journal of Bone and Mineral Research 1 (32): 151-156 (2017-01-01)
  Verlags DOI
• Endoprostheses in the elderly : biomaterials, implant selection and fixation technique
  Morlock, Michael; Jäger, M.
  Orthopäde 1 (46): 4-17 (2017-01-01)
  Verlags DOI
• Off-pump mitral valved stent implantation: comparison of apical and subannular fixation techniques
  Pokorny, Saskia; Huenges, Katharina; Hansen, Jan Hinnerk; Schadow, Yannik; Fischer, Gunther; Morlock, Michael; Cremer, Jochen; Lutter, Georg
  European journal of cardio-thoracic surgery 1 (51): 112-118 (2017-01)
  Verlags DOI
• Stem taper mismatch has a critical effect on ceramic head fracture risk in modular hip arthroplasty
  Gührs, Julian; Körner, Mandy; Bechstedt, Maren; Krull, Annika; Morlock, Michael
  Clinical Biomechanics (41): 106-110 (2017-01)
  Verlags DOI
• Biomechanical Effects of a Dynamic Topping off Instrumentation in a Long Rigid Pedicle Screw Construct
  Reichl, Michael; Kueny, Rebecca A.; Danyali, Reza; Obid, Peter; Übeyli, Hüseyin; Püschel, Klaus; Morlock, Michael; Huber, Gerd; Niemeyer, Thomas; Richter, Alexander
  Clinical Spine Surgery 4 (30): E440-E447 (2017)
  Verlags DOI
• Ein Weg zur sicheren Versorgung der Narbenhernie : das GRIP-Konzept
  Kallinowski, Friedrich; Vollmer, Matthias; Nessel, Regine
  CHAZ 18 (5): 2017
  
• Fretting-Korrosion modularer Hüftendoprothesen
  Bünte, Dennis
  Open Access
• Influence of trabecular bone quality and implantation direction on press-fit mechanics
  Damm, Niklas; Morlock, Michael; Bishop, Nicholas
  Journal of orthopaedic research 2 (35): 224-233 (2017)
  Verlags DOI
• Mikromechanik am Knochen-Implantat-Interface zementfreier Implantatbeschichtungen
  Damm, Niklas
  Shaker Verlag, Berichte aus der Biomechanik: (2017)
  
• Ringvorlesung „Tissue Engineering – Regenerative Medizin“ WiSe 16/17
  Pörtner, Ralf; Morlock, Michael
  Open Access

2016

• A new algorithm for estimating the rod volume fraction and the trabecular thickness from in vivo computed tomography
  Thomsen, Felix Sebastian Leo; Peña, Jaime Andrés; Lu, Yongtao; Huber, Gerd; Morlock, Michael; Glüer, Claus Christian; Delrieux, Claudio Augusto
  Medical Physics 12 (43): 6598-6607 (2016-12)
  Verlags DOI
• Primary hip replacement stem taper fracture due to corrosion in 3 patients
  Morlock, Michael; Bünte, Dennis; Ettema, Harmen; Verheyen, Cees C.; Hamberg, Åke; Gilbert, Jeremy
  Acta orthopaedica 2 (87): 189-192 (2016)
  Open Access | Verlags DOI
• A 1-D model of the nonlinear dynamics of the human lumbar intervertebral disc
  Marini, Giacomo; Huber, Gerd; Pueschel, Klaus; Ferguson, Stephen J.
  Journal of Sound and Vibration (387): 194-206 (2017)
  Verlags DOI
• Pharmacologically inactive bisphosphonates as an alternative strategy for targeting osteoclasts: in vivo assessment of 5-fluorodeoxyuridine-alendronate in a preclinical model of breast cancer bone metastases
  Schem, Christian; Tower, Robert J.; Kneissl, Philipp; Rambow, Anna C.; Campbell, Graeme Michael; Desel, Christine; Damm, Timo; Heilmann, Thorsten; Fuchs, Sabine; Zuhayra, Maaz; Trauzold, Anna; Glüer, Claus Christian; Schott, Sarah; Tiwari, Sanjay
  Journal of Bone and Mineral Research 3 (32): 536-548 (2017-03-01)
  Verlags DOI
• Clinical and wear analyses of 9 large metal-on-metal total hip prostheses
  Koper, Maarten C.; Mathijssen, Nina M. C.; Witt, Florian; Morlock, Michael; Vehmeijer, Stephan B. W.
  PloS one 10 (11): 0163438- (2016)
  Open Access | Verlags DOI
• The effect of six degree of freedom loading sequence on the in-vitro compressive properties of human lumbar spine segments
  Amin, Dhara B.; Lawless, Isaac M.; Sommerfeld, Dana; Stanley, Richard M.; Ding, Boyin; Costi, John J.
  Journal of Biomechanics 14 (49): 3407-3414 (2016-10-03)
  Verlags DOI
• Effects of insulin therapy on porosity, non-enzymatic glycation and mechanical competence in the bone of rats with type 2 diabetes mellitus
  Campbell, Graeme Michael; Tiwari, Sanjay; Picke, Ann-Kristin; Hofbauer, Christine; Rauner, Martina; Morlock, Michael; Hofbauer, Lorenz C.; Glüer, Claus Christian
  Bone (91): 186-193 (2016-10-01)
  Verlags DOI
• Towards the understanding of hip squeak in total hip arthroplasty using analytical contact models with uncertainty
  Oberst, Sebastian; Zhang, Zhi; Campbell, Graeme Michael; Morlock, Michael; Lai, Joseph C. S.; Hoffmann, Norbert
  International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, INTER-NOISE: 5539-5549 (2016-08-21)
  
• The initial slope of the variogram, foundation of the trabecular bone score, is not or is poorly associated with vertebral strength
  Maquer, Ghislain; Lu, Yongtao; Dall'Ara, Enrico; Chevalier, Yan; Krause, Matthias; Yang, Lang; Eastell, Richard; Lippuner, Kurt; Zysset, Philippe K.
  Journal of Bone and Mineral Research 2 (31): 341-346 (2016-02-01)
  Verlags DOI
• Bone-marrow densitometry: Assessment of marrow space of human vertebrae by single energy high resolution-quantitative computed tomography
  Peña, Jaime Andrés; Thomsen, Felix Sebastian Leo; Damm, Timo; Campbell, Graeme Michael; Bastgen, Jan; Barkmann, Reinhard; Glüer, Claus Christian
  Medical Physics 7 (43): 4174-4183 (2016-07-01)
  Verlags DOI
• Assembly force and taper angle difference influence the relative motion at the stem-neck interface of bi-modular hip prostheses
  Haschke, Henning; Jauch-Matt, Sabrina Y.; Sellenschloh, Kay; Huber, Gerd; Morlock, Michael
  Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine 7 (230): pp. 690-699 (2016)
  Open Access | Verlags DOI
• Effect of degeneration on the six degree of freedom mechanical properties of human lumbar spine segments
  Amin, Dhara B.; Sommerfeld, Dana; Lawless, Isaac M.; Stanley, Richard M.; Ding, Boyin; Costi, John J.
  Journal of Orthopaedic Research 8 (34): 1399-1409 (2016-08-01)
  Verlags DOI
• Geometrical aspects of patient-specific modelling of the intervertebral disc: collagen fibre orientation and residual stress distribution
  Marini, Giacomo; Studer, Harald; Huber, Gerd; Püschel, Klaus; Ferguson, Stephen J.
  Biomechanics and Modeling in Mechanobiology 3 (15): 543-560 (2016-06-01)
  Verlags DOI
• Contamination of modular hip taper interfaces increases post-assembly interface seating
  Haschke, Henning; Bishop, Nicholas; Witt, Florian; Eicke, Y.; Morlock, Michael
  Journal of bone and joint surgery - BRITISH VOLUME: (2016-05-01)
  
• A description of spinal fatigue strength
  Huber, Gerd; Nagel, Katrin; Skrzypiec, Daniel M.; Klein, Anke; Püschel, Klaus; Morlock, Michael
  Journal of Biomechanics 6 (49): 875-880 (2016-04-11)
  Verlags DOI
• Failure of the human lumbar motion-segments resulting from anterior shear fatigue loading
  Skrzypiec, Daniel M.; Nagel, Katrin; Sellenschloh, Kay; Klein, Anke; Püschel, Klaus; Morlock, Michael; Huber, Gerd
  Industrial Health 4 (54): 308-314 (2016)
  Verlags DOI
• Effects of parathyroid hormone on cortical porosity, non-enzymatic glycation and bone tissue mechanics in rats with type 2 diabetes mellitus
  Campbell, Graeme Michael; Tiwari, Sanjay; Hofbauer, Christine; Picke, Ann-Kristin; Rauner, Martina; Huber, Gerd; Peña, Jaime Andrés; Damm, Timo; Barkmann, Reinhard; Morlock, Michael; Hofbauer, Lorenz C.; Glüer, Claus Christian
  Bone (82): 116-121 (2016-01-01)
  Verlags DOI

2015

• Transapical mitral valved stent implantation: Computed tomographic evaluation of different prototype designs
  Pokorny, Saskia; Heinig, Alin; Hettich, Holger; Bähr, Telse; Marczynski-Bühlow, Martin; Morlock, Michael; Sattler, Benjamin; Schöttler, Jan; Lutter, Georg
  EuroIntervention 8 (11): 948-955 (2015-12)
  Verlags DOI
• Dynamic intermittent strain can rapidly impair ventral hernia repair
  Kallinowski, Friedrich; Baumann, Elena; Harder, Felix; Siassi, Michael; Mahn, Axel; Vollmer, Matthias; Morlock, Michael
  Journal of Biomechanics 15 (48): 4026-4036 (2015-11-26)
  Verlags DOI
• Biomechanical modelling of impact-related fracture characteristics and injury patterns of the cervical spine associated with riding accidents
  Jauch, Sabrina; Wallstabe, S.; Sellenschloh, Kay; Rundt, D.; Püschel, Klaus; Morlock, Michael; Meenen, Norbert M.; Huber, Gerd
  Clinical Biomechanics 8 (30): 795-801 (2015-10-01)
  Verlags DOI
• Interposition sleeve as treatment option for interprosthetic fractures of the femur: a biomechanical in vitro assessment
  Weiser, Lukas; Korecki, Michael A.; Sellenschloh, Kay; Fensky, Florian; Püschel, Klaus; Morlock, Michael; Rueger, Johannes M.; Lehmann, Wolfgang
  International Orthopaedics 9 (39): 1743-1747 (2015-10-01)
  Verlags DOI
• Quantification of material loss from the neck piece taper junctions of a bimodular primary hip prosthesis. A retrieval study from 27 failed Rejuvenate bimodular hip arthroplasties
  Bünte, Dennis; Huber, Gerd; Bishop, Nicholas; Morlock, Michael
  The bone & joint journal 10 (97-B): 1350-1357 (2015-10)
  Verlags DOI
• Friction coefficient and effective interference at the implant-bone interface
  Damm, Niklas; Morlock, Michael; Bishop, Nicholas
  Journal of Biomechanics 12 (48): 3517-3521 (2015-09-18)
  Verlags DOI
• Extra- vs. intramedullary treatment of pertrochanteric fractures: a biomechanical in vitro study comparing dynamic hip screw and intramedullary nail
  Weiser, Lukas; Ruppel, Andreas A.; Nüchtern, Jakob Valentin; Sellenschloh, Kay; Zeichen, Johannes; Püschel, Klaus; Morlock, Michael; Lehmann, Wolfgang
  Archives of Orthopaedic and Trauma Surgery 8 (135): 1101-1106 (2015-08-27)
  Verlags DOI
• Quantification of the contact area at the head-stem taper interface of modular hip prostheses
  Witt, Florian; Gührs, Julian; Morlock, Michael; Bishop, Nicholas
  PLOS ONE 8 (10): e0135517 (2015)
  Open Access | Verlags DOI
• Sensing Cardiac Electrical Activity With a Cardiac Myocyte--Targeted Optogenetic Voltage Indicator
  Chang Liao, Mei-Ling; Boer, Teun P. de; Mutoh, Hiroki; Raad, Nour; Richter, Claudia; Wagner, Eva; Downie, Bryan R.; Unsöld, Bernhard; Arooj, Iqra; Streckfuss-Bömeke, Katrin; Döker, Stephan; Luther, Stefan; Guan, Kaomei; Wagner, Stefan; Lehnart, Stephan E.; Maier, Lars S.; Stühmer, Walter; Wettwer, Erich; Veen, Toon van; Morlock, Michael; Knöpfel, Thomas; Zimmermann, Wolfram-Hubertus
  Circulation research 5 (117): 401-412 (2015-08-14)
  Verlags DOI
• Administration of romosozumab improves vertebral trabecular and cortical bone as assessed with quantitative computed tomography and finite element analysis
  Graeff, Christian; Campbell, Graeme Michael; Peña, Jaime Andrés; Borggrefe, Jan; Padhi, Desmond; Kaufman, Allegra; Chang, Sung; Libanati, Cesar; Glüer, Claus Christian
  Bone 81: 364-369 (2015-12-01)
  Verlags DOI
• Influence of the specimen scan condition on the finite element voxel model of human vertebral cancellous bone
  Lu, Yongtao
  Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization 3 (3): 172-176 (2015-07-03)
  Verlags DOI
• The taper disaster - How could it happen?
  Morlock, Michael
  HIP International 4 (25): 339-346 (2015-07-01)
  Verlags DOI
• The influence of stem taper re-use upon the failure load of ceramic heads
  Gührs, Julian; Krull, Annika; Witt, Florian; Morlock, Michael
  Medical Engineering and Physics 6 (37): 545-552 (2015-06-01)
  Verlags DOI
• In Vivo Quantification of the Apical Fixation Forces of Different Mitral Valved Stent Designs in the Beating Heart
  Pokorny, Saskia; Huenges, Katharina; Engel, A.; Groß, Justus; Frank, Derk; Morlock, Michael; Cremer, Jochen; Lutter, Georg
  Annals of Biomedical Engineering 5 (43): 1201-1209 (2015-05-01)
  Verlags DOI
• Morphological and biomechanical analyses of the subchondral mineralized zone in human sacral facet joints: Application to improved diagnosis of osteoarthritis
  Berteau, Jean Philippe; Mielke, Gabriela; Morlock, Michael; Huber, Gerd
  Clinical Anatomy 4 (28): 538-544 (2015-05-01)
  Verlags DOI
• Effect of potting technique on the measurement of six degree-of-freedom viscoelastic properties of human lumbar spine segments
  Amin, Dhara B.; Lawless, Isaac M.; Sommerfeld, Dana; Stanley, Richard M.; Ding, Boyin; Costi, John J.
  Journal of Biomechanical Engineering 137 (5): 054501 (2015-05-01)
  Verlags DOI
• Severe wear and pseudotumor formation due to taper mismatch in a total hip arthroplasty
  Koper, Maarten C.; Mathijssen, Nina M. C.; Witt, Florian; Morlock, Michael; Vehmeijer, Stephan B. W.
  JBJS Case Connector 2 (5): e29- (2015-04-08)
  Verlags DOI
• Compressive strength of elderly vertebrae is reduced by disc degeneration and additional flexion
  Maquer, Ghislain; Schwiedrzik, Jakob; Huber, Gerd; Morlock, Michael; Zysset, Philippe K.
  Journal of the Mechanical Behavior of Biomedical Materials (42): 54-66 (2015-02-01)
  Verlags DOI
• Basic principles and uniform terminology for the head-neck juncton in hip replacement
  Werner, Paul H.; Ettema, Harmen; Witt, Florian; Morlock, Michael; Verheyen, Cees C.
  HIP International 2 (25): 115-119 (2015-01-11)
  Verlags DOI
• Basic principles and uniform terminology for the head-neck junction in hip replacement
  Werner, Paul H.; Ettema, Harmen; Witt, Florian; Morlock, Michael; Verheyen, Cees C.
  Hip International 25 (2): 115-119 (2015)
  
• Comparison of different cement application techniques for tibial component fixation in TKA
  Schlegel, Ulf J.; Bishop, Nicholas; Püschel, Klaus; Morlock, Michael; Nagel, Katrin
  International Orthopaedics 39 (1): 47-54 (2015)
  Verlags DOI
• Matrix demineralisation leads to altered differentiation and function of osteoclasts
  Grünherz, Lisanne; Prein, Carina; Winkler, Thomas; Kirsch, Manuela; Hopfner, Ursula; Streichert, Thomas; Clausen-Schaumann, Hauke; Zustin, Jozef; Kirchhof, Kristin; Morlock, Michael; Machens, Hans-Günther; Schilling, Arndt F.
  PLOS one (submitted)
  
• Nonlinear dynamics of the human lumbar intervertebral disc
  Marini, Giacomo; Huber, Gerd; Püschel, Klaus; Ferguson, Stephen J.
  Journal of Biomechanics 3 (48): 479-488 (2015)
  Verlags DOI
• On the relationship between stature and anthropometric measurements of lumbar vertebrae
  Klein, Anke; Nagel, Katrin; Gührs, Julian; Poodendaen, Chanasorn; Püschel, Klaus; Morlock, Michael; Huber, Gerd
  Science and Justice 6 (55): 383-387 (2015)
  Verlags DOI
• The role of patient-mode high-resolution peripheral quantitative computed tomography indices in the prediction of failure strength of the elderly women’s thoracic vertebral body
  Lu, Yongtao; Krause, Michael; Bishop, Nicholas; Sellenschloh, Kay; Glüer, Claus Christian; Püschel, Klaus; Amling, Michael; Morlock, Michael; Huber, Gerd
  Osteoporosis International 26 (1): 237-244 (2015)
  Verlags DOI

2014

• Effect of tibial tray design on cement morphology in total knee arthroplasty
  Schlegel, Ulf Jens; Püschel, Klaus; Nagel, Katrin; Morlock, Michael
  Journal of orthopaedic surgery and research 9: 123 (2014)
  Open Access | Verlags DOI
• Significance of clinical examination, CT and MRI scan in the diagnosis of posterior pelvic ring fractures
  Nüchtern, Jakob Valentin; Hartel, Maximilian; Henes, Frank Oliver; Groth, Michael; Jauch, Sabrina Yvonne; Hägele, Julian; Briem, Daniel; Hoffmann, Michael; Lehmann, Wolfgang; Rueger, Johannes M.; Großterlinden, Lars Gerhard
  Injury 46 (2): 315-319 (2015-02)
  Verlags DOI
• The role of inter-prosthetic distance, cortical thickness and bone mineral density in the development of inter-prosthetic fractures of the femur
  Weiser, Lukas; Korecki, Michael A.; Fensky, Florian; Püschel, Klaus; Rueger, Johannes M.; Lehmann, Wolfgang; Sellenschloh, Kay; Morlock, Michael
  Bone and Joint Journal 96B (10): 1378-1384 (2014)
  Verlags DOI
• Influence of the screw augmentation technique and a diameter increase on pedicle screw fixation in the osteoporotic spine : pullout versus fatigue testing
  Kueny, Rebecca A.; Kolb, Jan Philipp; Lehmann, Wolfgang; Püschel, Klaus; Morlock, Michael; Huber, Gerd
  European Spine Journal 23 (10): 2196-2202 (2014)
  Verlags DOI
• The relation between titanium taper corrosion and cobalt-chromium bearing wear in large-head metal-on-metal total hip prostheses : a retrieval study
  Witt, Florian; Bosker, B.H.; Bishop, Nicholas; Ettema, Harmen; Verheyen, Cees C.; Morlock, Michael
  Journal of Bone and Joint Surgery - American Volume 96 (18): e157(1) (2014)
  Verlags DOI
• Development of a dynamic model for ventral hernia mesh repair
  Siassi, Michael; Mahn, Axel; Baumann, Elena; Vollmer, Matthias; Huber, Gerd; Morlock, Michael; Kallinowski, Friedrich
  Langenbeck's Archives of Surgery 399 (7): 857-862 (2014)
  Open Access | Verlags DOI
• Transapical mitral valved stent implantation : enhanced survival and decreased paravalvular leakages
  Pokorny, Saskia; Huenges, Katharina; Bähr, Telse; Hansen, Jan Hinnerk; Fischer, Gunther; Groß, Justus; Morlock, Michael; Cremer, Jochen; Lutter, Georg
  International Journal of Cardiology 175 (3): 418-424 (2014)
  Verlags DOI
• Influence of 3D QCT scan protocol on the QCT-based finite element models of human vertebral cancellous bone
  Lu, Yongtao; Engelke, Klaus; Püschel, Klaus; Morlock, Michael; Huber, Gerd
  Medical Engineering and Physics 36 (8): 1069-1073 (2014)
  Verlags DOI
• Transapical mitral valved stent implantation : comparison between circular and D-shaped design
  Pokorny, Saskia; Dai, Huangdong; Bähr, Telse; Huenges, Katharina; Marczynski-Bühlow, Martin; Morlock, Michael; Cremer, Jochen; Lutter, Georg
  EuroIntervention 10 (3): 372-380 (2014)
  Verlags DOI
• Wear of a composite ceramic head caused by liner fracture
  Morlock, Michael; Witt, Florian; Bishop, Nicholas; Behn, Rainer; Dalla Pria, Paolo; Barrow, Rob; Dymond, Ian
  Orthopedics 37 (7): e653–e656 (2014)
  Verlags DOI
• Periprosthetic and interimplant femoral fractures: Biomechanical analysis
  Rupprecht, Martin; Schlickewei, Carsten; Fensky, Florian; Morlock, Michael; Püschel, Klaus; Rueger, Johannes M.; Lehmann, Wolfgang
  Unfallchirurg 12 (118): 1025-1032 (2015)
  Verlags DOI
• Increase in facet joint loading after nucleotomy in the human lumbar spine
  Ivicsics, Miklós F.; Bishop, Nicholas; Püschel, Klaus; Morlock, Michael; Huber, Gerd
  Journal of Biomechanics 47 (7): 1712-1717 (2014)
  Verlags DOI
• Malpositioning of the lag screws by 1- or 2-screw nailing systems for pertrochanteric femoral fractures : a biomechanical comparison of gamma 3 and intertan
  Nüchtern, Jakob Valentin; Ruecker, Andreas Hermann; Sellenschloh, Kay; Rupprecht, Martin; Püschel, Klaus; Rueger, Johannes M.; Morlock, Michael; Lehmann, Wolfgang
  Journal of Orthopaedic Trauma 28 (5): 276-282 (2014)
  Verlags DOI
• Finite element analyses of human vertebral bodies embedded in polymethylmethalcrylate or loaded via the hyperelastic intervertebral disc models provide equivalent predictions of experimental strength
  Lu, Yongtao; Maquer, Ghislain; Museyko, Oleg; Püschel, Klaus; Engelke, Klaus; Zysset, Philippe K.; Morlock, Michael; Huber, Gerd
  Journal of Biomechanics 47 (10): 2512-2516 (2014)
  Verlags DOI
• The influence of bone damage on press-fit mechanics
  Bishop, Nicholas; Höhn, Jan Christian; Rothstock, Stephan; Damm, Niklas; Morlock, Michael
  Journal of Biomechanics 47 (6): 1472-1478 (2014)
  Verlags DOI
• Effects of parathyroid hormone on bone mass, bone strength, and bone regeneration in male rats with type 2 diabetes mellitus
  Hamann, Christine; Picke, Ann-Kristin; Campbell, Graeme Michael; Balyura, Mariya; Rauner, Martina; Bernhardt, Ricardo; Huber, Gerd; Morlock, Michael; Günther, Klaus-Peter; Bornstein, Stefan R.; Glüer, Claus Christian; Ludwig, Barbara; Hofbauer, Lorenz C.
  Endocrinology 155 (4): 1197-1206 (2014)
  Verlags DOI
• Three-dimensional quantification of calcium salt-composite resorption (CSC) in vitro by micro-computed tomography (Micro-CT)
  Winkler, Thomas; Dai, Xinyi; Mielke, Gabriela; Vogt, Sebastian; Buechner, H.; Schantz, Jan Thorsten; Harder, Yves; Machens, Hans-Günther; Morlock, Michael; Schilling, Arndt F.
  JOM 66 (4): 559-565 (2014)
  Verlags DOI
• Arthroprosthetic cobaltism and pseudotumour also occur in patients with small diameter femoral ball head metal-on-metal total hip arthroplasties
  Rößler, Philip Peter; Witt, Florian; Efe, Turgay; Schmitt, Jan
  BMJ Case Reports 2014 (mar28 1): 203362 (2014)
  Verlags DOI
• An in vitro comparison of tibial tray cementation using gun pressurization or pulsed lavage
  Schlegel, Ulf J.; Püschel, Klaus; Morlock, Michael; Nagel, Katrin
  International Orthopaedics 38 (5): 967-971 (2014)
  Verlags DOI
• Pseudotumor after bilateral ceramic-on-metal total hip arthroplasty : a case report
  Koper, Maarten C.; Mathijssen, Nina M. C.; Van Ravenswaay Claasen, H. H.; Witt, Florian; Vehmeijer, S.B.W.; Morlock, Michael
  JBJS Case Connector 4 (1): e25 (2014)
  Verlags DOI
• Malpositioning of the lag-screws by one- or two-screw nailing systems for pertrochanteric femoral fractures : a biomechanical comparison of Gamma3 and Intertan
  Nüchtern, Jakob Valentin; Ruecker, Andreas Hermann; Sellenschloh, Kay; Rupprecht, Martin; Püschel, Klaus; Rueger, Johannes M.; Morlock, Michael; Lehmann, Wolfgang
  Journal of orthopaedic trauma 3: 2014
  
• Design parameters and the material coupling are decisive for the micromotion magnitude at the stem-neck interface of bi-modular hip implants
  Jauch-Matt, Sabrina Yvonne; Huber, Gerd; Haschke, Henning; Sellenschloh, Kay; Morlock, Michael
  Medical Engineering and Physics 36 (3): 300-307 (2014)
  Verlags DOI
• Large-diameter total hip replacement bearings
  Morlock, Michael; Huber, Gerd; Bishop, Nicholas
  Tribology in total hip and knee arthroplasty : potential drawbacks and benefits of commonly used materials / Karl Knahr ed. - Heidelberg [u.a.] : Springer, 2013. - Seite 3-14
  Verlags DOI
• The effect of body weight on the choice of material for the bearing couple in artificial hip joints
  Hothan, Arne; Morlock, Michael; Hoenig, Elisa
  Seminars in Arthroplasty 4 (24): 218-239 (2013)
  Verlags DOI
• Nonlinear dynamic behaviour of the intervertebral disc
  Marini, Giacomo; Huber, Gerd; Ferguson, Stephen J.
  Proceedings of the ASME Summer Bioengineering Conference - 2013 : presented at ASME 2013 Summer Bioengineering Conference, June 26 - 29, 2013, Sunriver, Oregon, USA / sponsored by the Bioengineering Division, ASME. [Charles Y. Lee, conference chair]. - New York, NY : ASME. - Vol. B (2013), Paper No: SBC2013-14641, V01BT55A022; 2 pages
  Verlags DOI
• Effects of long-term alendronate treatment on bone mineralisation, resorption parameters and biomechanics of single human vertebral trabeculae
  Krause, Matthias; Soltau, M.; Zimmermann, Elizabeth A.; Hahn, Michael; Kornet, Jacob Jan; Hapfelmeier, A.; Breer, Stefan; Morlock, Michael; Wulff, Birgit; Püschel, Klaus; Glüer, Claus Christian; Amling, Michael; Busse, Björn
  European Cells and Materials 28: 152-165 (2014)
  Verlags DOI
• Friction induced dynamics of ball joints : instability and post bifurcation behavior
  Weiß, Cornelius; Morlock, Michael; Hoffmann, Norbert
  European Journal of Mechanics, A/Solids 45: 161-173 (2014)
  Verlags DOI
• Implementation of optogenetic voltage sensor VSFP2.3 to visualize cardiac excitation
  Chang Liao, Mei-Ling
  Open Access
• Pedicle screw fixation
  Murray, Rebecca Anne
  Open Access
• The effect of in situ/in vitro three-dimensional quantitative computed tomography image voxel size on the finite element model of human vertebral cancellous bone
  Lu, Yongtao; Engelke, Klaus; Glüer, Claus Christian; Morlock, Michael; Huber, Gerd
  Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine 11 (228): 1208-13-1213 (2014-11)
  Open Access | Verlags DOI

2013

• Biomechanical advantage of C1 pedicle screws over C1 lateral mass screws : a cadaveric study
  Fensky, Florian; Kueny, Rebecca A.; Sellenschloh, Kay; Püschel, Klaus; Morlock, Michael M.; Rueger, Johannes M.; Lehmann, Wolfgang; Huber, Gerd; Hansen-Algenstaedt, Nils
  European Spine Journal 23 (4): 724-731 (2014)
  Verlags DOI
• Influence of cooling on curing temperature distribution during cementing of modular cobalt-chromium and monoblock polyethylene acetabular cups
  Rothstock, Stephan; Saadatmand, Mahnaz; Vollmer, Matthias; Paech, Andreas; Jürgens, Christian; Nassutt, Roman; Morlock, Michael
  Surgical innovation 6 (20): 607-613 (2013-12)
  Open Access | Verlags DOI
• Präklinische Testung - klinische Anwendung - Schadensanalyse [Preclinical testing - clinical application - risk assessment : example using hip arthroplasty]
  Morlock, Michael; Huber, Gerd; Kaddick, Christian; Bishop, Nicholas
  Trauma und Berufskrankheit 4 (15): 221-225 (2013)
  Verlags DOI
• La biomécanique de l’os de l’enfant en croissance, une aide à la prise en charge kinésithérapique
  Berteau, Jean Philippe
  Kinesitherapie 143 (13): 16-21 (2013)
  Verlags DOI
• The influence of contact conditions and micromotions on the fretting behavior of modular titanium alloy taper connections
  Baxmann, Marc; Jauch, Sabrina Yvonne; Schilling, Christoph; Blömer, Wilhelm; Grupp, Thomas M.; Morlock, Michael
  Medical Engineering and Physics 5 (35): 676-683 (2013)
  Verlags DOI
• The effect of nucleotomy on facet joint loading : a porcine in vitro study
  Ivicsics, Miklós F.; Bishop, Nicholas; Sellenschloh, Kay; Berteau, Jean Philippe; Morlock, Michael; Huber, Gerd
  Clinical Biomechanics 8 (28): 853-859 (2013)
  Verlags DOI
• In vitro characterisation of the biomechanical properties of the subchondral mineralised zone of lumbosacral facet joints
  Berteau, Jean Philippe; Nover, L.; Mielke, Gabriela; Ivicsics, Miklós F.; Morlock, Michael; Huber, Gerd
  Computer Methods in Biomechanics and Biomedical Engineering SUPPL 1 (16): 226-227 (2013)
  Verlags DOI
• Necessary precision levels for the subchondral mineralised zone thickness of the facet joint to optimise finite-element model
  Höfemann, Maike; Berteau, Jean Philippe; Lu, Yongtao; Morlock, Michael; Huber, Gerd
  Computer Methods in Biomechanics and Biomedical Engineering SUPPL 1 (16): 224-225 (2013)
  Verlags DOI
• The effect of nucleotomy on facet joint loading in the porcine lumbar spine
  Ivicsics, Miklós F.; Bishop, Nicholas; Sellenschloh, Kay; Berteau, Jean Philippe; Morlock, Michael; Huber, Gerd
  Computer Methods in Biomechanics and Biomedical Engineering SUPPL 1 (16): 222-223 (2013)
  Verlags DOI
• The influence of stem design on critical squeaking friction with ceramic bearings
  Fan, Na; Morlock, Michael; Bishop, Nicholas; Huber, Gerd; Hoffmann, Norbert; Ciavarella, Michele; Chen, Guang X.; Hothan, Arne; Witt, Florian
  Journal of Orthopaedic Research 10 (31): 1627-1632 (2013)
  Verlags DOI
• Damage due to rolling in total knee replacement : the influence of tractive force
  Wimmer, Markus A.; Birken, Lars; Sellenschloh, Kay; Schneider, Erich
  Friction 2 (1): 178-185 (2013)
  Open Access | Verlags DOI
• Biomechanical evaluation of 3 stabilization methods on acromioclavicular joint dislocations
  Nüchtern, Jakob V.; Sellenschloh, Kay; Bishop, Nick; Jauch, Sabrina; Briem, Daniel; Hoffmann, Michael; Lehmann, Wolfgang; Pueschel, Klaus; Morlock, Michael; Rueger, Johannes M.; Großterlinden, Lars G.
  The American journal of sports medicine 6 (41): 1387-1394 (2013)
  Open Access | Verlags DOI
• Vibration transfer in the ball-stem contact interface of artificial hips
  Hothan, Arne; Lewerenz, Kathrin; Weiss, Cornelius; Hoffmann, Norbert; Morlock, Michael; Huber, Gerd
  Medical Engineering and Physics 10 (35): 1513-1517 (2013)
  Verlags DOI
• Does the cement stiffness affect fatigue fracture strength of vertebrae after cement augmentation in osteoporotic patients?
  Kolb, Jan Philipp; Kueny, Rebecca A.; Püschel, Klaus; Boger, Andreas; Rueger, Johannes M.; Morlock, Michael; Huber, Gerd; Lehmann, Wolfgang
  European Spine Journal 7 (22): 1650-1656 (2013)
  Verlags DOI
• Micromotions at the taper interface between stem and neck adapter of a bimodular hip prosthesis during activities of daily living
  Jauch, Sabrina Yvonne; Huber, Gerd; Sellenschloh, Kay; Haschke, Henning; Baxmann, Marc; Grupp, Thomas M.; Morlock, Michael
  Journal of Orthopaedic Research 8 (31): 1165-1171 (2013)
  Verlags DOI
• Cement augmentation of the proximal femoral nail antirotation for the treatment of osteoporotic pertrochanteric fractures : a biomechanical cadaver study
  Fensky, Florian; Nüchtern, Jakob Valentin; Kolb, Jan Philipp; Huber, Stephan; Rupprecht, Martin; Jauch, Sabrina Yvonne; Sellenschloh, Kay; Püschel, Klaus; Morlock, Michael; Rueger, Johannes M.; Lehmann, Wolfgang
  Injury 6 (44): 802-807 (2013)
  Verlags DOI
• Mechanical properties of native and tissue-engineered cartilage depend on carrier permeability : a bioreactor study
  Hoenig, Elisa; Leicht, Uta; Winkler, Thomas; Mielke, Gabriela; Beck, Katharina; Peters, Fabian; Schilling, Arndt F.; Morlock, Michael
  Tissue Engineering - Part A 13-14 (19): 1534-1542 (2013)
  Verlags DOI
• European multidisciplinary consensus statement on the use and monitoring of metal-on-metal bearings for total hip replacement and hip resurfacing
  Hannemann, Franziska; Hartmann, Albrecht; Schmitt, Jochen; Lützner, Jörg; Seidler, Andreas; Campbell, Patricia; Delaunay, Christian P.; Drexler, Hans; Ettema, Harmen; García-Cimbrelo, Eduardo; Huberti, Helmut; Knahr, Karl; Kunze, Joachim; Langton, David J.; Lauer, Wolfgang; Learmonth, Ian D.; Lohmann, Christoph H.; Morlock, Michael; Wimmer, Markus A.; Zagra, Luigi; Günther, Klaus-Peter
  Orthopaedics and Traumatology: Surgery and Research 3 (99): 263-271 (2013)
  Verlags DOI
• Wear patterns of taper connections in retrieved large diameter metal-on-metal bearings
  Bishop, Nicholas; Witt, Florian; Pourzal, Robin; Fischer, Alfons; Rütschi, Marcel; Michel, Markus; Morlock, Michael
  Journal of Orthopaedic Research 7 (31): 1116-1122 (2013)
  Verlags DOI
• Estimation of shear load sharing in moderately degenerated human lumbar spine
  Skrzypiec, Daniel M.; Bishop, Nicholas; Klein, Anke; Püschel, Klaus; Morlock, Michael; Huber, Gerd
  Journal of Biomechanics 4 (46): 651-657 (2013)
  Verlags DOI
• Consensus statement "Current evidence on the management of metal-on-metal bearings" April 16, 2012
  Ettema, Harmen; Günther, Klaus-Peter; Schmitt, Jochen; Campbell, Patricia; Delaunay, Christian P.; Drexler, Hans; García-Cimbrelo, Eduardo; Hannemann, Franziska; Hartmann, Albrecht; Huberti, Helmut; Knahr, Karl; Kunze, Joachim; Langton, David J.; Lauer, Wolfgang; Learmonth, Ian D.; Lohmann, Christoph H.; Lützner, Jörg; Morlock, Michael; Seidler, Andreas; Wimmer, Markus A.; Zagra, Luigi
  HIP International 23 (1): 2-5 (2013)
  Verlags DOI
• Technology and handling of ceramic implants
  Morlock, Michael; Huber, Gerd; Bishop, Nicholas
  Total hip arthroplasty : tribological considerations and clinical consequences / Karl Knahr, ed.. - Heidelberg : Springer, 2013. - Seite 3-16
  Verlags DOI
• Dependence of spinal segment mechanics on load direction, age and gender : Research project F 2059 ; final report of the project
  Nagel, Katrin; Klein, Anke; Püschel, Klaus; Morlock, Michael; Huber, Gerd
  Dependence on spinal segment mechanics on load direction, age and gender : Research project F 2059 ; [final report of the project] / K. Nagel ... [Federal Institute for Occupational Safety and Health]. - Dortmund ; Berlin ; Dresden : Federal Institute for Occupational Safety and Health, 2013
  
• Microstructure of retrievals made from standard cast HC-CoCrMo alloys
  Stemmer, Priska; Pourzal, Robin; Liao, Yifeng; Marks, Lawrence; Morlock, Michael; Jacobs, Joshua J.; Wimmer, Markus A.; Fischer, Alfons
  Metal-on-metal total hip replacement devices : [outgrowth of an ASTM symposium held on May 8, 2012 in Phoenix, Arizona] / editors: Steven M. Kurtz; A. Seth Greenwald; William M. Mihalko; Jack E. Lemons. - West Conshohocken, Pa. . ASTM International, 2013. - (ASTM Special Technical Publication ; 1560 STP). - Seite 251-267
  Verlags DOI
• Myokarditis durch Metallose
  Morlock, Michael; Friesecke, Ch.
  Hamburger Ärzteblatt 4: 28-30 (2013)
  
• New horizons for the in vivo assessment of major aspects of bone quality : microstructure and material properties assessed by Quantitative Computed Tomography and Quantitative Ultrasound methods developed by the BioAsset consortium
  Glüer, Claus Christian; Krause, Matthias; Museyko, Oleg; Wulff, Birgit; Campbell, Graeme Michael; Damm, Timo; Daugschies, Melanie; Huber, Gerd; Lu, Yongtao; Peña, Jaime Andrés; Waldhausen, Sonja; Bastgen, Jan; Rohde, Kerstin; Breer, Stefan; Steinebach, Inga; Thomsen, Felix Sebastian Leo; Amling, Michael; Barkmann, Reinhard; Engelke, Klaus; Morlock, Michael; Pfeilschifter, Johannes; Püschel, Klaus
  Osteologie 3 (22): 223-233 (2013)
  
• Periprosthetic tissue metal content but not serum metal content predicts the type of tissue response in failed small-diameter metal-on-metal total hip arthroplasties
  Lohmann, C. H.; Meyer, H.; Nüchtern, J. V.; Singh, G.; Junk-Jantsch, S.; Schmotzer, H.; Morlock, M.; Pflüger, G.
  Journal of Bone and Joint Surgery - Series A 17 (95): 1561-1568 (2013)
  Verlags DOI
• Properties of recycled high density polyethylene and coffee dregs composites
  Cestari, Sibele; Mendes, Luis Claudio; Silva, Daniela Franc̜a da; Chimanowsky, Jorge Pereira; Altstädt, Volker; Demchuk, Vitaly; Lang, Anneliese; Leonhardt, Rodrigo Gheno; Keller, Jan-Hendrik
  Polimeros 6 (23): 733-737 (2013)
  Verlags DOI
• Schadensanalyse
  Morlock, Michael; Huber, Gerd; Kaddick, Christian; Bishop, Nicholas
  In: Forschung in Orthopädie und Unfallchirurgie - Bestandsaufnahme und Ausblick : Weißbuch Forschung in Orthopädie und Unfallchirurgie / Herausgeber: Deutsche Gesellschaft für Orthopädie und Unfallchirurgie ; Redaktion W. Mittelmeier [und 5 weitere] ; Mitwirkende V. Alt [und viele weitere]. - 1. Auflage. - Aachen : Shaker Verlag, [2013]. - S.127-130
  
• Silent
  Morlock, Michael; Heisel, Christian
  In: Kurzschaftendoprothesen : wo liegen die Unterschiede? ; mit Tabellen / J. Jerosch (Hrsg.). Unter Mitarb. von J. Babisch .... - Köln : Deutscher Ärzte-Verl., 2013. - S. 15-22
  
• Strain changes on the cortical shell of vertebral bodies due to spine ageing: a parametric study using a finite element model evaluated by strain measurements
  Lu, Yongtao; Rosenau, Eike; Paetzold, Helge; Klein, Anke; Püschel, Klaus; Morlock, Michael; Huber, Gerd
  Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine 12 (227): 1265-1274 (2013-12)
  Open Access | Verlags DOI

2012

• High friction moments in large hard-on-hard hip replacement bearings in conditions of poor lubrication
  Bishop, Nicholas; Hothan, Arne; Morlock, Michael
  Journal of Orthopaedic Research 5 (31): 807-813 (2013)
  Verlags DOI
• What is the risk of stress risers for interprosthetic fractures of the femur? A biomechanical analysis
  Lehmann, Wolfgang; Rupprecht, Martin; Nuechtern, Jacob; Melzner, Daniel; Sellenschloh, Kay; Kolb, Jan Philipp; Fensky, Florian; Hoffmann, Michael; Püschel, Klaus; Morlock, Michael; Rueger, Johannes M.
  International Orthopaedics 36 (12): 2441-2446 (2012)
  Verlags DOI
• Influence of time in-situ and implant type on fixation strength of cemented tibial trays - a post mortem retrieval analysis
  Gebert de Uhlenbrock, Anne; Püschel, Vesna; Püschel, Klaus; Morlock, Michael; Bishop, Nicholas
  Clinical Biomechanics 27 (9): 929-935 (2012)
  Verlags DOI
• Interprosthetic fractures of the femur
  Lehmann, Wolfgang; Rupprecht, Martin; Ruecker, Andreas Hermann; Hoffmann, Michael; Morlock, Michael; Püschel, Klaus; Rueger, Johannes M.
  Trauma und Berufskrankheit 14 (3): 190-195 (2012)
  Verlags DOI
• Shear strength of the human lumbar spine
  Skrzypiec, Daniel M.; Klein, Anke; Bishop, Nicholas; Stahmer, Felix; Püschel, Klaus; Seidel, Helmut; Morlock, Michael; Huber, Gerd
  Clinical Biomechanics 27 (7): 646-651 (2012)
  Verlags DOI
• Locking plate fixation of humeral head fractures with a telescoping screw : a comparative biomechanical study versus a standard plate
  Gradl, Gertraud; Stedtfeld, Hans Werner; Morlock, Michael; Sellenschloh, Kay; Püschel, Klaus; Mittlmeier, Thomas; Gradl, Georg
  Injury 43 (6): 734-738 (2012)
  Verlags DOI
• The development of the collagen fibre network in tissue-engineered cartilage constructs in vivo : engineered cartilage reorganises fibre network
  Paetzold, Helge; Goepfert, Christiane; Huber, Gerd; Hoenig, Elisa; Pörtner, Ralf; Schilling, Arndt; Meenen, Norbert M.; Morlock, Michael
  European Cells and Materials (23): 209-221 (2012)
  Open Access | Verlags DOI
• Cementation and interface analysis of early failure cases after hip-resurfacing arthroplasty
  Krause, Matthias; Breer, Stefan; Hahn, Michael; Rüther, Wolfgang; Morlock, Michael; Amling, Michael; Zustin, Jozef
  International Orthopaedics 36 (7): 1333-1340 (2012)
  Verlags DOI
• Friction-induced whirl vibration : root cause of squeaking in total hip arthroplasty
  Weiß, Cornelius; Hothan, Arne; Huber, Gerd; Morlock, Michael; Hoffmann, Norbert
  Journal of Biomechanics 45 (2): 297-303 (2012)
  Verlags DOI
• Influence of assembly procedure and material combination on the strength of the taper connection at the head-neck junction of modular hip endoprostheses
  Rehmer, Annelie; Bishop, Nicholas; Morlock, Michael
  Clinical Biomechanics 27 (1): 77-83 (2012)
  Verlags DOI
• Analysis of retrieved hip resurfacing arthroplasties reveals the interrelationship between interface hyperosteoidosis and demineralisation of viable bone trabeculae
  Breer, Stefan; Krause, Matthias; Busse, Björn; Hahn, Michael; Rüther, Wolfgang; Morlock, Michael; Amling, Michael; Zustin, Jozef
  Journal of orthopaedic research 30 (7): 1155-1161 (2012)
  
• Bioresorption and degradation of biomaterials
  Das, Debarun; Zhang, Ziyang; Winkler, Thomas; Mour, Meenakshi; Gunter, Christina; Morlock, Michael; Machens, Hans-Günther; Schilling, Arndt F.
  Advances in biochemical engineering/biotechnology 126: 317-333 (2012)
  Verlags DOI
• High friction moments in large hard-on-hard hip replace-ment bearings in conditions of poor lubrication
  Bishop, Nicholas; Hothan, Arne; Morlock, Michael
  Journal of orthopaedic research 31 (5): 807-813 (2013)
  
• Improvements in the hip resurfacing surgical technique influence its failure pattern
  Krause, Matthias; Breer, Stefan; Morlock, Michael; Rüther, Wolfgang; Zustin, Jozef
  Global Journal of Surgery 3 (6): 2012
  
• Metal-on-metal : ion levels as an intervention strategy
  Morlock, Michael; Kunze, Joachim; Wimmer, Markus A.; Lohmann, Christoph H.
  Seminars in Arthroplasty 23 (4): 283-285 (2012)
  Verlags DOI

2011

• Analysis of retrieved hip resurfacing arthroplasties reveals the interrelationship between interface hyperosteoidosis and demineralization of viable bone trabeculae
  Breer, Stefan; Krause, Matthias; Busse, Björn; Hahn, Michael; Rüther, Wolfgang; Morlock, Michael; Amling, Michael; Zustin, Jozef
  Journal of Orthopaedic Research 7 (30): 1155-1161 (2012)
  Verlags DOI
• Welche Hüftgelenkgleitpaarung für welchen Patienten? : Tribologie der Zukunft [Which hip articulation bearing for which patient? Tribology of the future]
  Morlock, Michael; Bishop, Nicholas; Kaddick, Christian
  Der Orthopäde 40 (12): 1061-1067 (2011)
  Verlags DOI
• Internal fixation of femoral neck fractures with posterior comminution : a biomechanical comparison of DHS® and Intertan nail®
  Rupprecht, Martin; Großterlinden, Lars Gerhard; Sellenschloh, Kay; Püschel, Klaus; Hoffmann, Michael; Morlock, Michael; Rueger, Johannes M.; Lehmann, Wolfgang
  International Orthopaedics 35 (11): 1695-1701 (2011)
  Verlags DOI
• Sex differences in the morphological failure patterns following hip resurfacing arthroplasty
  Hinsch, Andrea; Vettorazzi, Eik; Morlock, Michael; Rüther, Wolfgang; Amling, Michael; Zustin, Jozef
  BMC Medicine 1 (9): - (2011)
  Open Access | Verlags DOI
• Squeaking as a cause for revision of a composite ceramic cup
  Schlegel, Ulf Jens; Bishop, Nicholas; Sobottke, Rolf; Perka, Carsten; Eysel, Peer; Morlock, Michael
  Orthopäde 40 (9): 812-816 (2011)
  Verlags DOI
• Pulsed lavage improves fixation strength of cemented tibial components
  Schlegel, Ulf Jens; Siewe, Jan; Delank, Karl S.; Eysel, Peer; Püschel, Klaus; Morlock, Michael; Gebert de Uhlenbrock, Anne
  International Orthopaedics 35 (8): 1165-1169 (2011)
  Verlags DOI
• Clinical Biomechanics : Editorial
  Morlock, Michael
  Clinical Biomechanics 26 (6): 641 (2011)
  Verlags DOI
• The 12th "emed Scientific Meeting ESM", Providence (RI), USA, 14 to 17 August 2010
  Morlock, Michael
  Clinical biomechanics 26 (6): 641 (2011)
  Verlags DOI
• Influence of material coupling and assembly condition on the magnitude of micromotion at the stem-neck interface of a modular hip endoprosthesis
  Jauch, Sabrina Yvonne; Huber, Gerd; Hoenig, Elisa; Baxmann, Marc; Grupp, Thomas M.; Morlock, Michael
  Journal of Biomechanics 44 (9): 1747-1751 (2011)
  Verlags DOI
• Influence of interface condition and implant design on bone remodelling and failure risk for the resurfaced femoral head
  Rothstock, Stephan; Gebert de Uhlenbrock, Anne; Bishop, Nicholas; Laird, Lindsay; Nassutt, Roman; Morlock, Michael
  Journal of Biomechanics 44 (9): 1646-1653 (2011)
  Verlags DOI
• Primary implant stability after maxillary sinus augmentation with autogenous mesenchymal stem cells : a biomechanical evaluation in rabbits
  Riecke, Björn; Heiland, Max; Hothan, Arne; Morlock, Michael; Amling, Michael; Blake, Felix
  Clinical Oral Implants Research 22 (11): 1242-1246 (2011)
  Verlags DOI
• Biomechanical evaluation for mechanisms of periprosthetic femoral fractures
  Rupprecht, Martin; Sellenschloh, Kay; Großterlinden, Lars Gerhard; Püschel, Klaus; Morlock, Michael; Amling, Michael; Rueger, Johannes M.; Lehmann, Wolfgang
  Journal of Trauma 70 (4): E62–E66 (2011)
  Verlags DOI
• The influence of component design, bearing clearance and axial load on the squeaking characteristics of ceramic hip articulations
  Hothan, Arne; Huber, Gerd; Weiß, Cornelius; Hoffmann, Norbert; Morlock, Michael
  Journal of Biomechanics 44 (5): 837-841 (2011)
  Verlags DOI
• Deformation characteristics and eigenfrequencies of press-fit acetabular cups
  Hothan, Arne; Huber, Gerd; Weiß, Cornelius; Hoffmann, Norbert; Morlock, Michael
  Clinical Biomechanics 26 (1): 46-51 (2011)
  Verlags DOI
• A comparative biomechanical analysis of fixation devices for unstable femoral neck fractures : the intertan versus cannulated screws or a dynamic hip screw
  Rupprecht, Martin; Großterlinden, Lars Gerhard; Ruecker, Andreas Hermann; Novo de Oliveira, Alexander; Sellenschloh, Kay; Nüchtern, Jakob Valentin; Püschel, Klaus; Morlock, Michael; Rueger, Johannes M.; Lehmann, Wolfgang
  Journal of Trauma: Injury, Infection & Critical Care 71 (3): 625-634 (2011)
  Verlags DOI
• Biomechanics of hip arthroplasty
  Morlock, Michael; Bishop, Nicholas; Huber, Gerd
  In: Tribology in total hip arthroplasty / Efort, European Federation of National Associations of Orthopaedics and Traumatology. Karl Knahr, ed.. - Heidelberg [u.a.] : Springer, 2011. - S.11-24
  
• Bone fragility and decline in stem cells in prematurely aging DNA repair deficient trichothiodystrophy mice
  Diderich, Karin E. M.; Nicolaije, Claudia; Priemel, Matthias; Waarsing, Jan H.; Day, Judd S.; Brandt, Renata M. C.; Schilling, Arndt; Botter, Sander M.; Weinans, Harrie; Horst, Gijsbertus T. J. van der; Hoeijmakers, Jan H. J.; Leeuwen, Johannes P. T. M. van
  AGE 4 (34): 845-861 (2012)
  Open Access | Verlags DOI
• Does impaction matter in hip resurfacing? A cadaveric study
  Schlegel, Ulf Jens; Rothstock, Stephan; Siewe, Jan Norbert; Schiwy-Bochat, Karl H.; Eysel, Peer; Morlock, Michael
  Journal of Arthroplasty 26 (2): 296-302 (2011)
  Verlags DOI
• Effects of impaction on cement mantle and trabecular bone in hip resurfacing
  Schlegel, Ulf J.; Knifka, Jutta; Röllinghoff, Marc; Koebke, Jürgen; Eysel, Peer; Morlock, Michael
  Archives of Orthopaedic and Trauma Surgery 131 (4): 459-464 (2011)
  
• High amplitude direct compressive strain enhances mechanical properties of scaffold-free tissue-engineered cartilage
  Hoenig, Elisa; Winkler, Thomas; Mielke, Gabriela; Paetzold, Helge; Schüttler, Daniel; Göpfert, Christiane; Machens, Hans-Günther; Morlock, Michael; Schilling, Arndt F.
  Tissue Engineering - Part A
  Verlags DOI
• Hochleistungsmaterialien brauchen Hochleistungsaufmerksamkeit
  Morlock, Michael
  directLINK 7 (2011)
  
• Influence of cementing the pin on resistance to fracture in hip resurfacing
  Schlegel, Ulf Jens; Siewe, Jan; Bitsch, Rudi G.; Koebke, Jürgen; Eysel, Peer; Morlock, Michael
  Clinical Biomechanics 26 (2): 136-140 (2011)
  Verlags DOI
• Internal fixation of femoral neck fractures by femoral locking plate : biomechanical comparison with the Intertan nail®, DHS® -and cannulated screws
  Rupprecht, Martin; Großterlinden, Lars Gerhard; Sellenschloh, Kay; Hoffmann, Michael; Püschel, Klaus; Morlock, Michael; Rueger, Johannes M.; Lehmann, Wolfgang
  International Orthopaedics 35 (11): 1695–1701 (2011)
  
• Noises originating from artificial hip replacements : where do they come from and how can they be prevented?
  Morlock, Michael; Hothan, Arne; Weiß, Cornelius; Hoffmann, N.
  Orthopädie im Profil 2: 12-14 (2011)
  
• Primärstabilität von unzementierten Press-FitImplantaten am Anwendungsfall des Oberflächenersatzes im Hüftgelenk
  Rothstock, Stephan
  Open Access
• Protesi rumorose, il punto dell'esperto
  Morlock, Michael
  Focus on: 16-17 (2011)
  
• Suitability and calibration of a rebound tonometer to measure IOP in rabbit and pig eyes
  Löbler, Marian; Rehmer, Annelie; Guthoff, Rudolf; Martin, Heiner; Sternberg, Katrin; Stachs, Oliver
  Veterinary Ophthalmology 14 (1): 66-68 (2011)
  Verlags DOI
• Welchen Beitrag kann die Schadensanalyse zur Qualitätssicherung leisten?
  Morlock, Michael; Huber, Gerd; Kaddick, Christian; Bishop, Nicholas
  Orthopädische Nachrichten 20: 2 (2011)
  
• Zur Biomechanik von Kurzschaftprothesen
  Morlock, Michael; Bishop, Nicholas; Hothan, Arne
  Orthopädie im Profil 7 (1): 10-11 (2011)
  

2010

• Erratum : Realistic loads for testing hip implants (Bio-Medical Materials and Engineering (2010) 20 (65-75) DOI: 10.3233/BME-2010-0616)
  Bergmann, Georg; Graichen, Friedmar; Rohlmann, Antonius; Bender, Alwina; Heinlein, Bernd; Duda, Georg; Heller, Markus O. W.; Morlock, Michael
  Bio-Medical Materials and Engineering 20 (6): 381 (2010)
  Verlags DOI
• High cycle fatigue behaviour of functional spinal units
  Huber, Gerd; Skrzypiec, Daniel M.; Klein, Anke; Püschel, Klaus; Morlock, Michael
  Industrial Health 48 (5): 550-556 (2010)
  Verlags DOI
• Fluid transfer as a mechanism leading to endotension
  Gebert de Uhlenbrock, Anne; Wintzer, C.; Imig, H.; Morlock, Michael
  Medical Engineering and Physics 32 (8): 914-920 (2010)
  Verlags DOI
• Volumetric analysis of osteoclastic bioresorption of calcium phosphate ceramics with different solubilities
  Winkler, Thomas; Hoenig, Elisa; Gildenhaar, Renate; Berger, Georg; Fritsch, Daniel; Janssen, Reinhard; Morlock, Michael; Schilling, Arndt F.
  Acta Biomaterialia 6 (10): 4127-4135 (2010)
  Verlags DOI
• Biomechanics of short hip endoprostheses - The risk of bone failure increases with decreasing implant size
  Bishop, Nicholas; Burton, Andrew; Maheson, Marci; Morlock, Michael
  Clinical Biomechanics 25 (7): 666-674 (2010)
  Verlags DOI
• Femoral component loosening after hip resurfacing arthroplasty
  Zustin, Jozef; Hahn, Michael; Morlock, Michael; Rüther, Wolfgang; Amling, Michael; Sauter, Guido
  Skeletal Radiology 39 (8): 747-756 (2010)
  Verlags DOI
• Squeak in hip endoprosthesis systems : an experimental study and a numerical technique to analyze design variants
  Weiß, Cornelius; Gdaniec , Przemyslaw; Hoffmann, Norbert; Hothan, Arne; Huber, Gerd; Morlock, Michael
  Medical Engineering and Physics 32 (6): 604-609 (2010)
  Verlags DOI
• Biomechanical evaluation of peri- and interprosthetic fractures of the femur
  Lehmann, Wolfgang; Rupprecht, Martin; Hellmers, Niels; Sellenschloh, Kay; Briem, Daniel; Püschel, Klaus; Amling, Michael; Morlock, Michael; Rueger, Johannes M.
  The journal of trauma : injury, infection, and critical care 68 (6): 1459-1463 (2010)
  Verlags DOI
• Advances in porous biomaterials for dental and orthopaedic applications
  Mour, Meenakshi; Das, Debarun; Winkler, Thomas; Hoenig, Elisa; Mielke, Gabriela; Morlock, Michael; Schilling, Arndt
  Materials 5 (3): 2947-2974 (2010-12-01)
  Open Access | Verlags DOI
• Osteoclastic bioresorption of biomaterials : two- and three-dimensional imaging and quantification
  Winkler, Thomas; Hoenig, Elisa; Gildenhaar, Renate; Janßen, Rolf; Berger, Georg; Fritsch, Daniel; Huber, Gerd; Morlock, Michael; Schilling, Arndt F.
  International Journal of Artificial Organs 33 (4): 198-203 (2010)
  Verlags DOI
• Primary stability of uncemented femoral resurfacing implants for varying interface parameters and material formulations during walking and stair climbing
  Rothstock, Stephan; Gebert de Uhlenbrock, Anne; Bishop, Nicholas; Morlock, Michael
  Journal of Biomechanics 43 (3): 521-526 (2010)
  Verlags DOI
• Morphologic analysis of periprosthetic fractures after hip resurfacing arthroplasty
  Zustin, Jozef; Krause, Matthias; Breer, Stefan; Hahn, Michael; Domarus, Christoph von; Rüther, Wolfgang; Sauter, Guido; Morlock, Michael; Amling, Michael
  Journal of Bone and Joint Surgery 92 (2): 404-410 (2010)
  Verlags DOI
• Audible vibrations in hip replacement systems
  Hothan, Arne; Huber, Gerd; Morlock, Michael; Weiß, Cornelius; Hoffmann, N.
  In: Modern trends in THA bearings : material and clinical performance; ... 38 tables / Justin P. Cobb, ed.. - Berlin ; Heidelberg : Springer, 2010. - S. 69-81
  
• Characterisation of specimens
  Huber, Gerd; Skrzypiec, Daniel M.; Püschel, Klaus; Morlock, Michael; Matthaei, Anna; Pöpplau, Berry
  In: Dependence of spinal segment mechanics on age and posture : research project F 2069 / G. Huber ... (eds.). [Authors: Barbara Hinz ...]. - Dortmund [u.a.] : Baua, Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, 2010. - S. 11-45
  
• Dynamic experiments
  Huber, Gerd; Skrzypiec, Daniel M.; Klein, Anke; Püschel, Klaus; Morlock, Michael
  In: Dependence of spinal segment mechanics on age and posture : research project F 2069 / G. Huber ... (eds.). [Authors: Barbara Hinz ...]. - Dortmund [u.a.] : Baua, Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, 2010. - S. 67-95
  
• Fatigue experiments
  Huber, Gerd; Skrzypiec, Daniel M.; Klein, Anke; Paetzold, Helge; Püschel, Klaus; Morlock, Michael
  In: Dependence of spinal segment mechanics on age and posture : research project F 2069 / G. Huber ... (eds.). [Authors: Barbara Hinz ...]. - Dortmund [u.a.] : Baua, Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, 2010. - S. 127-140
  
• Point of view
  Huber, Gerd; Skrzypiec, Daniel M.; Morlock, Michael; Seidel, Helmut; Hinz, Barbara; Mischke, Christoph
  In: Dependence of spinal segment mechanics on age and posture : research project F 2069 / G. Huber ... (eds.). [Authors: Barbara Hinz ...]. - Dortmund [u.a.] : Baua, Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, 2010. - S. 141-144
  
• Realistic loads for testing hip implants
  Bergmann, Georg; Graichen, Friedmar; Rohlmann, Antonius; Bender, Alwina; Heinlein, Bernd; Duda, Georg; Heller, Markus O. W.; Morlock, Michael
  Bio-Medical Materials and Engineering 20 (2): 65-75 (2010)
  Verlags DOI
• Shear experiments
  Skrzypiec, Daniel M.; Klein, Anke; Morlock, Michael; Püschel, Klaus; Huber, Gerd; Stahmer, Felix
  In: Dependence of spinal segment mechanics on age and posture : research project F 2069 / G. Huber ... (eds.). [Authors: Barbara Hinz ...]. - Dortmund [u.a.] : Baua, Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, 2010. - S. 47-66
  
• Sport und Endoprothetik : no more limits?
  Morlock, Michael
  In: Bewegung und Leistung - Sport, Gesundheit & Alter : 8. Gemeinsames Symposium der dvs-Sektionen Biomechanik, Sportmotorik und Trainingswissenschaft vom 02. - 04. September 2010 in Hamburg ; Abstracts / Mattes ... (Hrsg.). - Hamburg : Feldhaus, Ed. Czwalina, 2010. - S.12-13
  

2009

• Friction-induced vibration of artificial hip joints
  Weiß, Cornelius; Hothan, Arne; Morlock, Michael; Hoffmann, Norbert
  GAMM Mitteilungen 32 (2): 193-204 (2009)
  Verlags DOI
• Improvements in vertebral body strength under teriparatide treatment assessed in vivo by finite element analysis : results from the EUROFORS study
  Graeff, Christian; Chevalier, Yan; Charlebois, Mathieu; Varga, Peter; Pahr, Dieter; Nickelsen, Thomas N.; Morlock, Michael; Glüer, Claus Christian; Zysset, Philippe K.
  Journal of Bone and Mineral Research 10 (24): 1672-1680 (2009)
  Verlags DOI
• Proinflammatory and osteoclastogenic effects of beta-tricalciumphosphate and hydroxyapatite particles on human mononuclear cells in vitro
  Lange, Tobias; Schilling, Arndt F.; Peters, Fabian; Haag, Friedrich; Morlock, Michael; Rueger, Johannes M.; Amling, Michael
  Biomaterials 30 (29): 5312–5318 (2009)
  Verlags DOI
• Association of osteonecrosis and failure of hip resurfacing arthroplasty
  Zustin, Jozef; Sauter, Guido; Morlock, Michael; Rüther, Wolfgang; Amling, Michael
  Clinical Orthopaedics and Related Research 468 (3): 756–761 (2009)
  Verlags DOI
• Biomechanical analysis of expansion screws and cortical screws used for ventral plate fixation on the cervical spine
  Röhl, Klaus; Ullrich, Bernhard; Huber, Gerd; Morlock, Michael
  European Spine Journal 18 (9): 1335-1341 (2009)
  Verlags DOI
• Damage to a hip endoprosthesis caused by high-frequency electrocautery
  Huber, Gerd; Weik, T.; Morlock, Michael
  Orthopäde 38 (7): 622-625 (2009)
  Verlags DOI
• Micro-structural alterations within different areas of articulating surfaces of a metal-on-metal hip resurfacing system
  Pourzal, Robin; Theissmann, Ralf; Morlock, Michael; Fischer, Alfons
  Wear 267 (5-8): 689–694 (2009)
  Verlags DOI
• Intraosseous lymphocytic infiltrates after hip resurfacing arthroplasty : a histopathological study on 181 retrieved femoral remnants
  Zustin, Jozef; Sauter, Guido; Amling, Michael; Krause, Matthias; Breer, Stefan; Hahn, Michael; Morlock, Michael; Rüther, Wolfgang
  Virchows Archiv 454 (5): 581–588 (2009)
  Verlags DOI
• Technical strategies to improve tissue engineering of cartilage-carrier- constructs
  Pörtner, Ralf; Göpfert, Christiane; Wiegandt, Katharina; Janßen, Rolf; Ilinich, Eduard; Paetzold, Hans; Eisenbarth, Eva Maria; Morlock, Michael
  Advances in Biochemical Engineering/Biotechnology 112: 145–181 (2009)
  Verlags DOI
• Influence of press-fit parameters on the primary stability of uncemented femoral resurfacing implants
  Gebert de Uhlenbrock, Anne; Peters, J.; Bishop, Nicholas; Westphal, Florian; Morlock, Michael
  Medical Engineering and Physics 31 (1): 160–164 (2009)
  Verlags DOI
• Designanalyse von endovaskulären Aortenprothesen
  Gebert de Uhlenbrock, Anne
  Open Access
• Numerische Optimierung von Implantaten zur Versorgung von Hernien
  Gregor, Michael
  Open Access
• The condition of the cement mantle in femoral hip prosthesis implantations : a post mortem retrieval study
  Bishop, Nicholas; Schönwald, Martin A.; Schultz, Peter; Püschel, Klaus; Morlock, Michael
  HIP International 19 (2): 87-95 (2009)
  Verlags DOI

2008

• Gap junctional communication in human osteoclasts in vitro and in vivo
  Schilling, Arndt F.; Filke, Silke; Lange, Tobias; Gebauer, Matthias; Brink, Silja; Baranowsky, Anke; Zustin, Jozef; Amling, Michael
  Journal of Cellular and Molecular Medicine 6A (12): 2497-2504 (2008)
  Verlags DOI
• A new short uncemented, proximally fixed anatomic femoral implant with a prominent lateral flare : design rationals and study design of an international clinical trial
  Renkawitz, Tobias; Santori, Francesco Saverio; Grifka, Joachim; Valverde, Carlos; Morlock, Michael M.; Learmonth, Ian D.
  BMC Musculoskeletal Disorders 1 (9): Art.-Nr. 147 (2008)
  Open Access | Verlags DOI
• Friction moments of large metal-on-metal hip joint bearings and other modern designs
  Bishop, Nicholas; Waldow, F.; Morlock, Michael
  Medical Engineering and Physics 30 (8): 1057–1064 (2008)
  Verlags DOI
• The size of lumbar vertebral endplate areas-Prediction by anthropometric characteristics and significance for fatigue failure due to whole-body vibration
  Seidel, Helmut; Pöpplau, Berry M.; Morlock, Michael; Püschel, Klaus; Huber, Gerd
  International Journal of Industrial Ergonomics 38 (9/10): 844–855 (2008)
  Verlags DOI
• Systematic accuracy and precision analysis of video motion capturing systems-exemplified on the Vicon-460 system
  Windolf, Markus; Götzen, Nils; Morlock, Michael
  Journal of Biomechanics 41 (12): 2776– 2780 (2008)
  Verlags DOI
• Modes of implant failure after hip resurfacing : morphological and wear analysis of 267 retrieval specimens.
  Morlock, Michael; Bishop, Nicholas; Zustin, Jozef; Hahn, Michael; Rüther, Wolfgang; Amling, Michael
  The Journal of bone and joint surgery. American volume 90 (Suppl. 3): 89-95 (2008)
  Verlags DOI
• Reasons for failure of hip resurfacing implants : a failure analysis based on 250 revision specimens
  Morlock, Michael; Bishop, Nicholas; Stahmer, Felix; Zustin, Jozef; Breer, Stefan; Sauter, Guido; Hahn, Michael; Krause, Matthias; Rüther, Wolfgang; Amling, Michael
  Orthopäde 37 (7): 695-703 (2008)
  Verlags DOI
• Tissue sparing hip implants
  Bishop, Nicholas; Morlock, Michael
  European Cells and Materials 16 (Suppl. 2): 4 (2008)
  
• Biomechanical analysis of atlas fractures : a study on 40 human atlas specimens
  Gebauer, Matthias; Götzen, Nils; Barvencik, Florian; Beil, Frank Timo; Rupprecht, Martin; Rueger, Johannes M.; Püschel, Klaus; Morlock, Michael; Amling, Michael
  Spine 33 (7): 766-770 (2008)
  Verlags DOI
• "Basketball foot" : long-time prognosis after peritalar dislocation
  Simon, Lutz C.; Schulz, Arndt-Peter; Faschingbauer, Maximilian; Morlock, Michael; Jürgens, Christian
  Sportverletzung, Sportschaden 22 (1): 31-37 (2008)
  Verlags DOI
• Dreidimensionale archäologische Knochendichtemessung als Spiegel der biomechanischen Belastung zur Lebzeit von „Moora“ 650 vor Christus
  Schilling, Arndt F.; Jopp-van Well, Eilin; Morlock, Michael; Amling, Michael; Püschel, Klaus; Marshall, Robert Percy
  In: Andreas Bauerochse; Henning Haßmann; Klaus Püschel (Hrsg.): "Moora" - das Mädchen aus dem Uchter Moor : eine Moorleiche der Eisenzeit aus Niedersachsen . - Rahden/Westf : Leidorf, 2008. - S.83-88
  
• Mechanical failure of hard-on-hard bearings and preventive measures
  Morlock, Michael
  In: Sorial, Rami M. (Hrsg.): Delta Course Compendium, 2nd Edition (2008)
  
• Quietschgeräusche in Hüftgelenksendoprothesen : Ursachen und Einflussgrößen
  Hoffmann, Norbert; Weiß, Cornelius; Morlock, Michael; Hothan, Arne
  Magazin der CeramTec AG: 6-7 (2008)
  
• Tribologie unterschiedlicher Gleitpaarungen : ein wesentlicher Aspekt in der Revisionsendoprothetik
  Morlock, Michael
  In: Wirtz, Dieter (Hrsg.): Revisionsendoprothetik der Hüftpfanne. - Heidelberg : Springer, 2008. - S. 201-229
  

2007

• Cement mantle defects in total hip arthroplasty : influence of stem size and cementing technique
  Katzer, Alexander; Ince, Akif; Hahn, Michael; Morlock, Michael; Steens, Wolfram
  Journal of Orthopaedics and Traumatology 8 (4): 167-172 (2007)
  Open Access | Verlags DOI
• Experimental results for the validation of dynamic finite element models
  Huber, Gerd; Paetzold, Hans; Püschel, Klaus; Morlock, Michael
  VDI Berichte 2002: 249-262 (2007)
  
• Consistent hydration of intervertebral discs during in vitro testing
  Huber, Gerd; Morlock, Michael; Ito, Keita
  Medical Engineering and Physics 29 (7): 808-813 (2007)
  Verlags DOI
• Artificial composite bone as a model of human trabecular bone : the implant-bone interface
  Grant, J.A.; Bishop, Nicholas; Götzen, Nils; Sprecher, C.; Honl, Matthias; Morlock, Michael
  Journal of Biomechanics 40 (5): 1158-1164 (2007)
  Verlags DOI
• Intra-articular pressure measurement in the radioulnocarpal joint using a novel sensor : in vitro and in vivo results
  Rikli, Daniel A.; Honigmann, Philipp; Babst, Reto; Cristalli, Alessandra; Morlock, Michael; Mittlmeier, Thomas
  Journal of Hand Surgery 32 (1): 67-75 (2007)
  Verlags DOI
• The relationship between the initial mechanical environment and migration in cementless hip arthroplasty : computational and experimental testing
  Jeffers, J. R .T.; Westphal, F. M.; Morlock, Michael; Taylor, M.
  Journal of orthopaedic research (submitted)
  
• Veränderung der biochemischen und biomechanischen Eigenschaften von Knorpel durch unconfined compression Tests in phosphatgepufferter Salzlösung
  Eisenbarth, Eva Maria; Paetzold, Helge; Morlock, Michael
  Biomedical engineering (accepted)
  

2006

• Migration and cyclic motion of a new short-stemmed hip prosthesis : a biomechanical in vitro study
  Westphal, Florian; Bishop, Nicholas; Honl, Matthias; Hille, Ekkehard; Püschel, Klaus; Morlock, Michael
  Clinical Biomechanics 21 (8): 834-840 (2006)
  Verlags DOI
• Orientation of the acetabular component : a comparison of five navigation systems with conventional surgical technique
  Honl, Matthias; Schwieger, Karsten; Salineros, Matías J.; Jacobs, Joshua J.; Morlock, Michael; Wimmer, Markus A.
  Journal of Bone and Joint Surgery, Series B 88 (10): 1401-1406 (2006)
  Verlags DOI
• Migration and cyclic motion of a new short-stemmed hip prosthesis : a biomechanical in vitro study
  Westphal, Florian; Bishop, Nicholas; Honl, Matthias; Hille, Ekkehard; Püschel, Klaus; Morlock, Michael
  Clinical Biomechanics 21 (8): 834–840 (2006)
  
• Migration of two different cementless hip arthroplasty stems in combination with two different heads : a biomechanical in vitro study
  Klestil, Thomas; Morlock, Michael; Schwieger, Karsten; Sellenschloh, Kay; Curda, B.; Biedermann, R.; Hennerbichler, A.; Schmoelz, W.; Rabl, W.; Blauth, M.
  Archives of Orthopaedic and Trauma Surgery 126 (6): 387-393 (2006)
  Verlags DOI
• Deformation of press-fitted metallic resurfacing cups. Part 1: Experimental simulation
  Jin, Zhongmin; Meakins, Steven; Morlock, Michael; Parsons, Peter A.; Hardaker, Catherine; Flett, Magnus; Isaac, Graham H.
  Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine 2 (220): 299-309 (2006)
  Open Access | Verlags DOI
• Deformation of press-fitted metallic resurfacing cups. Part 2: Finite element simulation
  Yew, A.; Jin, Zhongmin; Donn, A.; Morlock, Michael; Isaac, Graham H.
  Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine 2 (220): 311-319 (2006)
  Open Access | Verlags DOI
• Biomechanical, morphological, and histological analysis of early failures in hip resurfacing arthroplasty
  Morlock, Michael; Bishop, Nicholas; Rüther, Wolfgang; Delling, Günter; Hahn, Michael
  Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine 2 (220): 333-344 (2006)
  Open Access | Verlags DOI
• Investigation on stick phenomena in metal-on-metal hip joints after resting periods
  Wimmer, Markus A.; Nassutt, Roman; Sprecher, Christoph; Loos, J.; Täger, Georg; Fischer, Alfons
  Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine 2 (220): 219-227 (2006-02)
  Open Access | Verlags DOI
• Lessons learned from early clinical experience and results of 300 ASR hip resurfacing implantations
  Siebel, Thomas; Maubach, Stefan; Morlock, Michael
  Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine 2 (220): 345-353 (2006-02)
  Open Access | Verlags DOI
• Biomechanics of a new short-stemmed uncemented hip prosthesis : an in-vitro study in human bone
  Westphal, F. M.; Bishop, Nicholas; Püschel, Klaus; Morlock, Michael
  HIP International 16 (3): 22-30 (2006)
  Verlags DOI
• Die Biomechanik des Fußes
  Morlock, Michael
  Jatros Orthopädie 8 (1): 12-14 (2006)
  
• Gleitpaarung heute und morgen
  Morlock, Michael
  MedReport 30 (19): 5 (2006)
  
• Validating a numerical model of the lumbar spine with in vitro experiments
  Mischke, Christoph; Huber, Gerd; Morlock, Michael; Wölfel, H.
  In: Special issue on the Third International Conference on Whole-body Vibration Injuries, Nancy, France, 7 - 9 June 2005 / [guest ed. Michael J. Griffin] Kongress: International Conference on Whole-body Vibration Injuries ; 3 (Nancy) : 2005.06.07-09. - London : Academic Press, 2006.
  
• Wunsch und Wirklichkeit : Tribologie und Implantationstechnik des Oberflächenersatzes
  Morlock, Michael; Rüther, Wolfgang; Hahn, Michael; Delling, Günter
  Orthopädie im Profil 2 (1): 16-17 (2006)
  

2005

• Mechanical behavior of screws in normal and osteoporotic bone
  Seebeck, Jannes; Goldhahn, J.; Morlock, Michael; Schneider, Erich
  Osteoporosis International 16 (2): 107-111 (2005)
  Verlags DOI
• Comparison of total hip replacements cup orientation and position using different navigation systems and the conventional manual technique
  Honl, Matthias; Schwieger, Karsten; Gauck, Christian H.; Lampe, Frank; Morlock, Michael; Hille, Ekkehard; Wimmer, Markus A.
  Orthopäde 34 (11): 1131-1136 (2005)
  Verlags DOI
• Load-shift : numerical evaluation of a new design philosophy for uncemented hip prostheses
  Götzen, Nils; Lampe, Frank; Nassutt, Roman; Morlock, Michael
  Journal of Biomechanics 38 (3): 595–604 (2005)
  Verlags DOI
• Relationship between physical, biochemical and biomechanical properties of tissue-engineered cartilage-carrier-constructs
  Göpfert, Christiane; Morlock, Michael; Pörtner, Ralf; Nagel-Heyer, Stephanie
  Biotechnology Letters 27 (3): 187-192 (2005)
  Verlags DOI
• Biomechanik
  Morlock, Michael
  In: Hildebrandt, Jan; Müller, Gerd; Pfingsten, Michael (Hrsg.): Lendenwirbelsäule : Ursachen, Diagnostik und Therapie von Rückenschmerzen. - München: Elsevier, 2005. - S. 150-164
  
• Micromotion at the bone-implant interface
  Morlock, Michael; Spears, Iain R.; Pfleiderer, M.; Schneider, Erich
  In: Proceedings of the 1st GAMM Seminar on Continuum Biomechanics : [November 24 - 26, 2004, in Freudenstadt-Lauterbad, Germany] / W. Ehlers & B. Markert (ed.) Kongress: GAMM Seminar on Continuum Biomechanics ; 1 (Freudenstadt-Lauterbad) : 2004.11.24-26. - Essen : VGE, Verl. Glückauf Essen, 2005. - S. 99-108
  
• Orthopädische Trennverfahren unter besonderer Berücksichtigung des Strahlschneidens
  Honl, Matthias
  Open Access
• Verhalten von Wirbelsäulensegmenten bei dynamischer Belastung : Abschlussbericht zum Projekt "Experimentelle in-vitro Bestimmung der Belastbarkeit von Segmenten der Lendenwirbelsäule bei wiederholten praxisrelevanten (Ganzkörperschwingungen) Belastungen durch Kompressions- und Schubkräfte" - Projekt F 1899
  Huber, Gerd; Paetzold, Hans; Püschel, Klaus; Morlock, Michael
  Verhalten von Wirbelsäulensegmenten bei dynamischer Belastung : [Abschlussbericht zum Projekt "Experimentelle in-vitro Bestimmung der Belastbarkeit von Segmenten der Lendenwirbelsäule bei wiederholten praxisrelevanten (Ganzkörperschwingungen) Belastungen durch Kompressions- und Schubkräfte" - Projekt F 1899] / G. Huber .... - Bremerhaven : Wirtschaftsverl. NW, Verl. für Neue Wiss., 2005
  
• Zertifiziertes Materialversagen
  Wening, J.V.; Stegemann, J.; Lechert, B.; Morlock, Michael; Püschel, Klaus
  Mitteilungen und Nachrichten : Deutsche Gesellschaft für Unfallchirurgie 25 (48): 43-44 (2003)
  

2004

• Calcium phosphate ceramics as substrate for cartilage cultivation
  Janßen, Rolf; Nagel-Heyer, Stephanie; Göpfert, Christiane; Pörtner, Ralf; Toykan, Derya; Krummhauer, Oliver; Morlock, Michael; Adamietz, Peter; Meenen, Norbert M.; Kriven, Waltraud M.; Kim, Dong-Kyu; Tampieri, Anna; Celotti, Giancarlo
  Ceramic Engineering and Science Proceedings 25 (4): 523-528 (2004)
  
• Abrasive water jet cutting as a new procedure for cutting cancellous bone : in vitro testing in comparison with the oscillating saw
  Schwieger, Karsten; Carrero, Volker; Rentzsch, Reemt; Becker, Axel; Bishop, Nicholas; Hille, Ekkehard; Louis, Hartmut; Morlock, Michael; Honl, Matthias
  Journal of Biomedical Materials Research. Part B Applied Biomaterials 71 (2): 223-228 (2004)
  Verlags DOI
• Effect of cortical thickness and cancellous bone density on the holding strength of internal fixator screws
  Seebeck, Jannes; Goldhahn, J.; Städele, H.; Messmer, P.; Morlock, Michael; Schneider, Erich
  Journal of Orthopaedic Research 22 (6): 1237-1242 (2004)
  Verlags DOI
• Mechanical behavior of screws in normal and osteoporotic bone
  Seebeck, Jannes; Goldhahn, J.; Morlock, Michael; Schneider, Erich
  Osteoporosis International 16: 107–111 (2005)
  Verlags DOI
• Adaptation of mechanical, morphological, and biochemical properties of the rat growth plate to dose-dependent voluntary exercise
  Niehoff, Anja; Kersting, Uwe Gustav; Zaucke, Frank; Morlock, Michael; Brüggemann, Gert Peter
  Bone 35 (4): 899– 908 (2004)
  Verlags DOI
• Comparison of the THR-Cup-Orientation using different navigation systems
  Honl, Matthias; Schwieger, Karsten; Dries, Sebastian Peter Michael; Gauck, C.; Lampe, Frank; Morlock, Michael; Hille, Ekkehard; Wimmer, Markus A.
  4th Annual Meeting of CAOS-International (2004)
  
• Vollkeramische Brücken aus Oxidkeramik – Ist die Lebensdauer vorhersagbar?
  Tinschert, J.; Götzen, Nils; Natt, G.; Morlock, Michael; Spiekermann, H.
  Biomaterialien 5: 50-51 (2004)
  

2003

• The water jet as a new tool for endoprosthesis revision surgery : an in vitro study on human bone and bone cement
  Honl, Matthias; Rentzsch, Reemt; Schwieger, Karsten; Carrero, Volker; Dierk, Oliver; Dries, Sebastian Peter Michael; Louis, Hartmut; Pude, Frank; Bishop, Nicholas; Hille, Ekkehard; Morlock, Michael
  Bio-Medical Materials and Engineering 13 (4): 317-325 (2003)
  
• Load shift-total hip replacement : numerical and clinical evaluation of a new concept of adaptive stem fixation
  Lampe, Frank; Nassutt, Roman; Götzen, Nils; Honl, Matthias; Dries, Sebastian Peter Michael; Kokenge, Thomas; Morlock, Michael; Hille, Ekkehard
  Zeitschrift fur Orthopädie und Ihre Grenzgebiete 141 (6): 657-664 (2003)
  Verlags DOI
• Comparison of robotic-assisted and manual implantation of a primary total hip replacement : a prospective study
  Honl, Matthias; Dierk, Oliver; Gauck, Christian H.; Carrero, Volker; Lampe, Frank; Dries, Sebastian Peter Michael; Quante, Markus; Schwieger, Karsten; Hille, Ekkehard; Morlock, Michael
  Journal of Bone and Joint Surgery 85 (8): 1470-1478 (2003)
  Verlags DOI
• Pressure loading of the aneurysm sac under endoleak type III-simulation
  Wintzer, C.; Birken, Lars; Kleinschmidt, D.; Riepe, Gunnar; Morlock, Merlin; Müller, Jakob J.; Debus, Eike Sebastian; Imig, H.
  Gefässchirurgie 8 (3): 206–211 (2003)
  Verlags DOI
• Use of a water jet for synovectomy : in vitro study of feasibility
  Honl, Matthias; Uebeyli, H.; Dierk, Oliver; Schwieger, Karsten; Rentzsch, Reemt; Carrero, Volker; Dries, Sebastian Peter Michael; Betthäuser, A.; Höpker, W. W.; Hille, Ekkehard; Morlock, Michael
  Zeitschrift fur Orthopädie und Ihre Grenzgebiete 141 (3): 322-327 (2003)
  Verlags DOI
• The influence of resting periods on friction in the artificial hip
  Nassutt, Roman; Wimmer, Markus A.; Schneider, Erich; Morlock, Michael
  Clinical Orthopaedics and Related Research 407: 127-138 (2003)
  Verlags DOI
• Pelvic girdle reconstruction based on spinal fusion and ischial screw fixation in a case of aneurysmal bone cyst
  Honl, Matthias; Westphal, Florian; Carrero, Volker; Morlock, Michael; Schwieger, Karsten; Hille, Ekkehard; Delling, Günter
  Sarcoma, vol. 7, no. 3-4, pp. 177-182, 2003
  Open Access | Verlags DOI
• Absence of surface roughness changes after insertion of one type of matte cemented femoral component during 2 to 15 years
  Knoch, Marius von; Bluhm, Andrea; Morlock, Michael; Foerstér, Götz von
  Journal of Arthroplasty 18 (4): 471-477 (2003)
  Verlags DOI
• An instrument quantifying human balance skills : attitude reference system for an ankle exercise board
  Wagner, J.F.; Lippens, V.; Nagel, V.; Morlock, Michael; Vollmer, Matthias
  International journal of computer science in sport 1: 96-110 (2003)
  
• Biomechanik des Gelenkersatzes
  Morlock, Michael; Lampe, Frank; Honl, Matthias
  In: Medizintechnik-Report Hamburg / Hrsg. TUHH-Technologie GmbH. Red. Wolfgang Stille .... - Hamburg, [2003]. - S. 7-10
  
• Der gepulste Wasserstrahl zur selektiven Knochenzemententfernung in der Revisionsendoprothetik
  Honl, Matthias; Schwieger, Karsten; Carrero, Volker; Rentzsch, Reemt; Dierk, Oliver; Dries, Sebastian Peter Michael; Pude, Frank; Bluhm, Andrea; Hille, Ekkehard; Louis, Hartmut; Morlock, Michael
  Biomedizinische Technik (Biomedical engineering) 48 (10): 275-280 (2003)
  Verlags DOI
• Pelvic girdle reconstruction by spinal fusion in combination with ischial screw fixation in a case of aneurysmal bone cyst
  Honl, Matthias; Westphal, Florian; Carrero, Volker; Morlock, Michael; Schwieger, Karsten; Hille, Ekkehard; Delling, Günter
  Sarcoma 7 (3/4): 177-182 (2003)
  Verlags DOI

2002

• Bone-patellar tendon-bone grafts for anterior cruciate ligament reconstruction : an in vitro comparison of mechanical behavior under failure tensile loading and cyclic submaximal tensile loading
  Honl, Matthias; Carrero, Volker; Hille, Ekkehard; Schneider, Erich; Morlock, Michael
  The American journal of sports medicine 4 (30): 549-557 (2002 Jul-Aug)
  Open Access | Verlags DOI
• The influence of material and design features on the mechanical properties of transpedicular spinal fixation implants
  Hahn, Michael; Nassutt, Roman; Delling, Günter; Mahrenholtz, Oskar; Schneider, Erich; Morlock, Michael
  Journal of Biomedical Materials Research 63 (3): 354-362 (2002)
  Verlags DOI
• Schädigung von Polyestergefäßprothesen durch Gefäßklemmen
  Riepe, Gunnar; Meincke, J.; Nassutt, Roman; Seemann, D.; Chakfé, Nabil; Morlock, Michael; Gross-Fengels, Walter; Imig, Herbert
  Zentralblatt für Chirurgie 127 (2): 89-94 (2002)
  Verlags DOI
• Einbringung von Pedikelschrauben unter Einsatz unterschiedlicher Unterstützungsverfahren : ein Laborversuch an 12 Wirbelsäulenpräparaten
  Reichle, E.; Sellenschloh, Kay; Morlock, Michael; Eggers, Christian C. J.
  Der Orthopäde 31 (4): 368-371 (2002)
  Verlags DOI
• Zur Definition der Pedikelfehllage : Primärstabilität und Lockerungsverhalten von Pedikelschrauben in Abhängigkeit von ihrer Lage ; spongiöse Verankerung, kortikale Verankerung, Perforation und Fehllage
  Reichle, E.; Morlock, Michael; Sellenschloh, Kay; Eggers, Christian C. J.
  Der Orthopäde 31 (4): 402-405 (2002)
  Verlags DOI
• Arterial kinking due to hip joint flexion : an angiographic study on arteriosclerotic patients
  Riepe, Gunnar; Seemann, D.; Mückner, K.; Dieval, F.; Gross-Fengels, Walter; Imig, Herbert; Morlock, Michael; Chakfé, Nabil
  European Journal of Vascular and Endovascular Surgery (submitted)
  
• Bestimmung der Primärstabilität von künstlichen Hüftpfannen
  Morlock, Michael; Götzen, Nils; Sellenschloh, Kay; Nassutt, Roman; Honl, Matthias
  In: Eigenschaften und Prüftechniken mechanisch beanspruchter Implantate : 3. Tagung des DVM-Arbeitskreises "Biowerkstoffe", 12. und 13. April 2002, Klinik und Poliklinik für Orthopädie, Klinikum der Universität zu Köln / DVM, Deutscher Verband für Materialforschung u. -prüfung e.V. Obmann des Arbeitskreises: Dietmar Eifler. - Berlin : DVM, 2002. - S. 221-229
  
• Ceramized articulating surfaces of metal-metal hip joint prosthesis
  Neumann, Hans Georg; Baumann, Axel; Wanke, G.; Hamelynck, Karel J.; Morlock, Michael
  Key Engineering Materials 218-220: 601-604 (2002)
  
• Der Bio-Abrasiv-Druckwasserstrahl als alternatives Trennverfahren für den Robotereinsatz : eine in vitro-Studie im Vergleich zur oszillieren­den Säge an Spongiosa
  Honl, Matthias; Schwieger, Karsten; Rentzsch, Reemt; Dierk, Oliver; Becker, A.; Dries, Sebastian Peter Michael; Pude, Frank; Hille, Ekkehard; Morlock, Michael
  Der Orthopäde (submitted)
  
• Influence of connector design on fracture probability of ceramic fixed-partial dentures
  Oh, Won‐suck; Götzen, Nils; Anusavice, Kenneth J.
  Journal of dental research 9 (81): 623-627 (2002-09)
  Open Access | Verlags DOI
• The influence of in vitro testing method on measured intervertebral disc characteristics
  Huber, Gerd; Linke, Berend; Morlock, Michael; Ito, Keita
  Spinal implants : are we evaluating them appropriately? - West Conshohocken, Pa., 2003. - (ASTM STP ; vol 1431). - Seite 103-113
  
• Vergleich unterschiedlicher Wirbelkörperersatzsysteme hinsichtlich Migration und Primärstabilität bei dorsoventraler Spondylodese nach Korporektomie mit und ohne Laminektomie
  Morlock, Michael; Strandborg, Johann; Sellenschloh, Kay; Nassutt, Roman; Püschel, Klaus; Eggers, Christian C. J.
  Der Orthopäde 31 (5): 514-521 (2002)
  Verlags DOI
• Vergleich unterschiedlicher Wirbelkörperersatzsysteme hinsichtlich Migration und Primär­stabilität bei dorsoventraler Spondylodese nach Korporektomie mit und ohne Laminektomie
  Morlock, Michael; Strandborg, J.; Sellenschloh, Kay; Nassutt, Roman; Püschel, Klaus; Eggers, Christoph
  Orthopäde 31 (5): 514-521 (2002)
  
• What can we learn from explanted endovascular devices?
  Riepe, Gunnar; Heintz, Carsten; Kaiser, Edelgard; Chakfé, Nabil; Morlock, Michael; Delling, M.; Imig, Herbert
  European Journal of Vascular and Endovascular Surgery 24 (2): 117-122 (2002)
  Verlags DOI
• Zur Definition der Pedikelfehllage. Primärstabilität und Lockerungsverhalten von Pedikelschrauben in Abhängigkeit von ihrer Lage: spongiöse Verankerung, kortikale Verankerung, Perforation und Fehllage
  Reichle, E.; Morlock, Michael; Sellenschloh, Kay; Eggers, Christoph
  Der Orthopäde 31 (4): 402-405 (2002)
  

2001

• Friction and wear properties of metal/metal hip joints : application of a novel testing and analysis method
  Wimmer, Markus A.; Artelt, D.; Kunze, Joachim; Morlock, Michael; Schneider, Erich; Nassutt, Roman
  Materials science and engineering technology 32 (12): 891-896 (2001)
  Verlags DOI
• Activity profile of total knee patients during the day
  Hänni, M.; De Wilde Philippe; Morlock, Michael; Schneider, Erich; Kehl, T.; Wimmer, Markus A.
  Journal of Biomechanics 34 (suppl. 1): S50 (2001)
  
• Dose and time-dependent adaptation of mechanical strength and morphology of the epiphyseal and articular cartilage in the rat model
  Niehoff, Anja; Kersting, Uwe Gustav; Brüggemann, Gert Peter; Morlock, Michael; Sellenschloh, Kay; Zaucke, Frank; Michna, H.
  Journal of Biomechanics 34 (suppl. 1): S40-S41 (2001)
  
• The influence of intervertebral disc time-dependent properties on in-vitro testing
  Huber, Gerd; Ito, Keita; Schneider, Erich; Morlock, Michael
  Journal of Biomechanics 34 (suppl. 1) S13-S14 (2001)
  
• Corroded nitinol wires in explanted aortic endografts : an important mechanism of failure?
  Heintz, Carsten; Riepe, Gunnar; Birken, Lars; Kaiser, Edelgard; Chakfé, Nabil; Morlock, Michael; Delling, Günter; Imig, Herbert
  Journal of Endovascular Therapy 8 (3): 48-253 (2001)
  Verlags DOI
• Duration and frequency of every day activities in total hip patients
  Morlock, Michael; Schneider, Erich; Bluhm, Andrea; Vollmer, Matthias; Bergmann, Georg; Müller, V.; Honl, Matthias
  Journal of Biomechanics 34 (7): 873-881 (2001)
  Verlags DOI
• Water jet discotomy using the microinvasive approach : in-vitro-testing and the first clinical aspects of a new procedure
  Honl, Matthias; Dierk, Oliver; Küster, J. R.; Müller, Gerhard; Müller, Volker; Hille, Ekkehard; Morlock, Michael
  Zeitschrift fur Orthopadie und Ihre Grenzgebiete 139 (1): 45-51 (2001)
  Verlags DOI
• Biomechanical testing of locked anterior cervical spine stabilisation systems and different screw fixation
  Rehbein, P.; Nassutt, Roman; Eggers, Christian C. J.; Morlock, Michael
  Journal of Biomechanics 34 (suppl. 1): S4 (2001)
  
• Die Jet Cutting Diskotomie : ein neues mikroinvasives Verfahren
  Honl, Matthias; Dierk, Oliver; Müller, Volker; Küster, J. R.; Hille, Ekkehard; Morlock, Michael
  In: Wasserstrahldissektion in der Medizin. Zusammenfassung und Referate / R. Siegert, V. Jurk, R. Magritz (Hrsg.).: 79-90 (2001)
  
• Die Wasserstrahldiskotomie im mikroinvasiven Zugang : In-vitro Testung und erste klinische Aspekte eines neuen Verfahrens
  Honl, Matthias; Dierk, Oliver; Küster, J. R.; Müller, Gerhard; Müller, Volker; Hille, Ekkehard; Morlock, Michael
  Zeitschrift für Orthopädie und ihre Grenzgebiete 139 (1): 45-51 (2001)
  
• Efficiency of navigation systems in the positioning of pedicular screws and the effect of cortical perforation on the primary stability of pedicular screws
  Reichle, E.; Sellenschloh, Kay; Molwitz, M.; Morlock, Michael; Eggers, Christian C. J.
  Journal of Biomechanics 34 (suppl. 1): S44 (2001)
  
• Late complications after alloplastic vascular replacement
  Riepe, Gunnar; Chakfé, Nabil; Meincke, J.; Nassutt, Roman; Seemann, D.; Klinggräff, G.; Morlock, Michael; Imig, H.
  Kongressbd. Deutsche Gesellschaft für Chirurgie 118:475-477 (2001)
  
• Mismatched wear couple Zirconium oxide and Aluminium oxide in total hip arthroplasty : a case report
  Morlock, Michael; Nassutt, Roman; Janssen, Reinhard; Willmann, G.; Honl, Matthias
  Journal of arthroplasty 16 (8): 1071-1074 (2001)
  
• Mismatched wear couple zirconium oxide and aluminum oxide in total hip arthroplasty
  Morlock, Michael; Nassutt, Roman; Janssen, Rolf; Willmann, Gerd; Honl, Matthias
  Journal of Arthroplasty 16 (8): 1071-1074 (2001)
  Verlags DOI
• No surface roughness changes of one type of matte cemented femoral component during 2-15 years in service
  Knoch, Marius von; Bluhm, Andrea; Morlock, Michael; Foerstér, Goetz von
  Journal of Biomechanics 34 (Suppl. 1) : S72-S73 (2001)
  
• Schlagkräfte beim Boxen
  Morlock, Michael; Nassutt, Roman; Vollmer, Matthias; Groß, E.; Huber, Gerd
  Sensor-Report 16 (1): 20-21 (2001)
  
• The effect of interfacial parameters on cup-bone relative micromotions : a finite element investigation
  Spears, Iain R.; Pfleiderer, Martin; Hille, Ekkehard; Schneider, Erich; Morlock, Michael
  Journal of Biomechanics 34 (1): 113-120 (2001)
  Verlags DOI

2000

• The use of water-jetting technology in prostheses revision surgery : first results of parameter studies on bone and bone cement
  Honl, Matthias; Rentzsch, Reemt; Müller, Gerd; Brandt, Carsten; Bluhm, Andrea; Hille, Ekkehard; Louis, Hartmut; Morlock, Michael
  Journal of Biomedical Materials Research 53 (6): 781-790 (2000)
  Verlags DOI
• Interfacial conditions between a press-fit acetabular cup and bone during daily activities : implications for achieving bone in-growth
  Spears, Iain R.; Pfleiderer, Martin; Schneider, Erich; Hille, Ekkehard; Bergmann, Georg; Morlock, Michael
  Journal of Biomechanics 33 (11): 1471-1477 (2000)
  Verlags DOI
• Determination of the in vivo loading of the lumbar spine with a new approach directly at the workplace : ffirst results for nurses
  Morlock, Michael; Bonin, Veronika; Deuretzbacher, Georg; Müller, Gerhard; Honl, Matthias; Schneider, Erich
  Clinical Biomechanics 15 (8): 549-558 (2000)
  Verlags DOI
• Aneurysma spurium der Arteria poplitea nach vorderer Kreuzbandplastik
  Müller, Volker; Dierk, Oliver; Morlock, Michael; Hille, Ekkehard; Honl, Matthias
  Arthroskopie 13: 194-196 (2000)
  
• Biomechanik der Wirbelsäule : Belastung, Einfluss von Degeneration und operativen Verfahren auf das mechanische Verhalten
  Morlock, Michael; Honl, Matthias
  Materialien zum II. Wirbelsäulenkurs, BG Klinik Bergmannstrost Halle: 15-22 (2000)
  
• Die robotergestützte Implantation von Hüftendoprothesen - Erfahrungen und Ergebnisse nach 100 Operationen
  Honl, Matthias; Lampe, Frank; Gauck, Christian H.; Müller, G.; Morlock, Michael; Hille, Ekkehard
  Extracta orthopaedica 1: 1-6 (2000)
  
• Langzeitverhalten von Gefäßprothesen im Menschen : Degeneration des Polyesters durch Hydrolyse
  Riepe, Gunnar; Chakfé, Nabil; Morlock, Michael; Schröder, A.; Imig, H.
  In: Zelluläre Interaktion mit Biomaterialien : VII. Tagung der Chirurgischen Arbeitsgemeinschaft für Biomaterialien der Deutschen Gesellschaft für Chirurgie / N. M. Meenen ... (Hrsg.) Kongress: Tagung der Chirurgischen Arbeitsgemeinschaft für Biomaterialien der Deutschen Gesellschaft für Chirurgie ; 7 (Hamburg) : 1998.. - Berlin [u.a.] : Springer, 2000. - S. 175-177
  
• Ruptur der Achillessehne : Argumente für die Nahtversorgung
  Meenen, Norbert M.; Sarvary, A.; Mühlenfeld, K.; Sotonyi, P.; Morlock, Michael; Baranyi, G.; Rueger, Johannes M.
  Trauma und Berufskrankheit 2 (5): 157-159 (2000)
  
• Stentdrahtbrüche und Maschenlockerungen explantierter, endovaskularer Prothesen
  Riepe, Gunnar; Heintz, Carsten; Chakfé, Nabil; Morlock, Michael; Gross-Fengels, Walter; Imig, Herbert
  Zentralblatt fur Chirurgie 125 (1): 22-26 (2000)
  
• The use of granular hydroxyapatite ceramic as bone substitute for critical-size bone defects
  Meenen, Norbert M.; Englert, C.; Morlock, Michael
  Clinical orthopaedics and related research (submitted)
  
• Water jet cutting zur Bearbeitung von Knochen und Knochenzement : Parameterstudie zu Möglichkeiten und Grenzen einer neuen Methode
  Honl, Matthias; Rentzsch, Reemt; Lampe, Frank; Muller, Volker; Dierk, Oliver; Hille, Ekkehard; Louis, Hartmut L.; Morlock, Michael
  Biomedizinische Technik 45 (9): 222-227 (2000)
  Verlags DOI
• Water-jet cutting in medical use : an overview
  Honl, Matthias; Rentzsch, Reemt; Üebeyli, H.; Hille, Ekkehard; Morlock, Michael; Louis, Hartmut L.
  In: Papers presented at the 15th International Conference on Jetting Technology : held in Ronneby, Sweden, 6 - 8 September 2000 / organized and sponsored by BHR Group Limited. - Bury St. Edmunds [u.a.] : Professional Engineering Publications, c2000. - S. 183-196
  

1999

• Belastungsanalysen bei Krankenschwestern – Konsequenzen für die Prävention von Wirbelsäulenproblemen
  Morlock, Michael; Schneider, Erich
  In: Prävention von arbeitsbedingten Gesundheitsgefahren und Erkrankungen : 5. Erfurter Tage; [Dokumentation des 5. Symposiums der Erfurter Tage der Berufsgenossenschaft Nahrungsmittel und Gaststätten (BGN), Dezember 1998] / [Hrsg. von: Siegfried Radandt ...]. - Leipzig : Monade, 1999. - S. 105-117
  
• Der Zusammenhang zwischen der Belastung am Arbeitsplatz und Rückenschmerzen – ein multifaktorieller Ansatz für den Pflegeberuf
  Morlock, Michael
  Morlock, Michael: Der Zusammenhang zwischen der Belastung am Arbeitsplatz und Rückenschmerzen - ein multifaktorieller Ansatz für den Pflegeberuf / Michael M. Morlock. - Als Ms. gedr. - Aachen : Shaker, 1999
  
• Die Auswirkungen von Belastungen auf die Endoprothesen-Knochenverbindung - Konsequenzen für Design, Verweildauer und Rehabilitation
  Lampe, Frank; Morlock, Michael; Pfleiderer, M.; Wimmer, Markus A.; Nassutt, Roman; Hille, Ekkehard; Schneider, Erich
  In: Prävention und Rehabilitation des Haltungs- und Bewegungsapparates : 4. Symposium der DVS-Sektion Biomechanik vom 3. - 5. 4. 1997 in Oldenburg / Volker Zschorlich (Hrsg.). - 1. Aufl. - Hamburg : Czwalina, 1999. - S. 49-66
  
• Die Bestimmung der Belastung von Krankenpflegekräften am Arbeitsplatz : erste Ergebnisse
  Morlock, Michael; Schneider, Erich
  Sichere Arbeit : internationales Fachmagazin für Prävention in der Arbeitswelt 4: 22-27 (1999)
  
• Die Materialpaarung Zirkonoxid / Aluminiumoxid im Hüftgelenk : eine Fallstudie
  Morlock, Michael; Nassutt, Roman; Honl, Matthias; Janßen, Rolf; Willmann, G.
  In: Reliability and long term-results of ceramics in orthopaedics : 34 tables; 4th International CeramTec Symposium March 13, 1999 / Laurent Sedel and Gerd Willmann. - Stuttgart ; New York : Thieme, 1999. - S. 99-104
  
• Ein vereinfachtes Verfahren zur mechanischen Prüfung von LWS-Implantaten
  Hahn, Michael; Nassutt, Roman; Morlock, Michael; Delling, Günter; Schneider, Erich; Mahrenholtz, Oskar
  Biomedical engineering 44 (10): 283-289 (1999)
  Verlags DOI
• Ermittlung der Eigenschaften und der Wirkung kohäsiver Stützbandagen
  Morlock, Michael; Nassutt, Roman
  Orthopädie-Technik 50 (5): 400-412 (1999)
  
• Frame dislocation of body middle rings in endovascular stent tube grafts
  Heilberger, Peter; Umscheid, Thomas W.; Chakfé, Nabil; Raithel, Dieter; Stelter, Wolf Joachim; Morlock, Michael; Kretz, Jean Georges; Schröder, A.; Imig, Herbert
  European Journal of Vascular and Endovascular Surgery 17 (1): 28-34 (1999)
  Verlags DOI
• Implantatverankerung in osteoporotischem Knochen mittels monokortikaler Schrauben
  Seebeck, J.; Lill, C.; Morlock, Michael; Schneider, Erich
  Trauma und Berufskrankheit 1 (4): 411-414 (1999)
  
• In-vivo Messung der Beanspruchung des Erector Spinae Muskels bei unterschiedlichen Haltetätigkeiten
  Morlock, Michael; Honl, Matthias; Müller, G.
  In: Prävention von arbeitsbedingten Gesundheitsgefahren und Erkrankungen : 5. Erfurter Tage; [Dokumentation des 5. Symposiums der Erfurter Tage der Berufsgenossenschaft Nahrungsmittel und Gaststätten (BGN), Dezember 1998] / [Hrsg. von: Siegfried Radandt ...]. - Leipzig : Monade, 1999. - S. 210-230
  
• Mechanische Testungen von Implantaten für die „Ventrale interkorporelle Spondylodese“ der unteren Halswirbelsäule
  Rehbein, P.; Nassutt, Roman; Eggers, Christoph; Morlock, Michael
  Trauma und Berufskrankheit 1 (4): 332-336 (1999)
  
• Mechanische Überprüfung der Winkelstabilität von internen Fixateuren und winkelstabilen Plattensystemen
  Nassutt, Roman; Morlock, Michael
  Trauma und Berufskrankheit 4 (1): 398-401 (1999)
  
• The influence of friction and interference on the seating of a hemispherical press-fit cup : a finite element investigation
  Spears, Iain R.; Morlock, Michael; Pfleiderer, Martin; Schneider, Erich; Hille, Ekkehard
  Journal of Biomechanics 32 (11): 1183-1189 (1999)
  Verlags DOI
• Wirkprinzipien der winkelstabilen Platten-Schrauben-Verbindung bei Fixateur-interne-Osteosynthesen
  Seide, Klaus; Morlock, Michael; Schümann, U.; Wolter, D.
  Trauma und Berufskrankheit 1 (4): 320-325 (1999)
  

1998

• A new screening method designed for wear analysis of bearing surfaces used in total hip arthroplasty
  Wimmer, Markus A.; Nassutt, Roman; Lampe, Frank; Schneider, Erich; Morlock, Michael
  In: Alternative bearing surfaces in total joint replacement : [proceedings of the Symposium on Alternative Bearing Surfaces in Total Joint Replacement, held in San Diego, Calif., on November 11 - 12, 1997] / Joshua J. Jacobs and Thomas L. Craig, ed. - West Conshohocken, Pa. : American Society for Testing and Materials, 1998. - S. 30-43
  
• Altersabhänigkeit der Fixationsfestigkeit der ACL Plastik : klinische Übertragung einer in-vitro Studie
  Honl, Matthias; Müller, Volker; Morlock, Michael; Dierk, Oliver; Betthäuser, A.; Müller, Gerhard; Hille, Ekkehard; Schneider, Erich
  Deutsche Zeitschrift für Sportmedizin 49 (1): 233-237 (1998)
  
• Biomechanische Untersuchung an der degenerativ veränderten LWS und ihre Korrelation zur bildgebenden Diagnostik
  Heinze, J.; Eggers, Christoph; Reimann, B.; Morlock, Michael; Schneider, Erich
  In: Berufsbedingte Erkrankungen der Lendenwirbelsäule / herausgegeben von D. Wolter, K. Seide. - Berlin, Heidelberg : Springer Berlin Heidelberg, 1998. - S. 161-171
  Verlags DOI
• Biomechanische Untersuchung an der degenerativ veränderten lumbalen Wirbelsäule und ihre Korrelation zur bildgebenden Diagnostik
  Heinze, J.; Reimann, B.; Morlock, Michael; Schneider, Erich; Eggers, Christoph
  In: Berufsbedingte Erkrankungen der Wirbelsäule bei Beschäftigten im Gesundheitswesen / Berufsgenossenschaft für Gesundheitsdienst und Wohlfahrtspflege. Wiss. Leiter: D. Wolter 1997 Abschlußbericht 1997. - [Hamburg] : BGW, 1998. - S. 177-200
  
• Biomechanische Untersuchung zur Quantifizierung der Belastung der Wirbelsäule bei Beschäftigten im Gesundheitsdienst
  Morlock, Michael; Schneider, Erich; Bonin, Veronika; Hansen, I.
  In: Berufsbedingte Erkrankungen der Wirbelsäule bei Beschäftigten im Gesundheitswesen / Berufsgenossenschaft für Gesundheitsdienst und Wohlfahrtspflege. Wiss. Leiter: D. Wolter 1997 Abschlußbericht 1997. - [Hamburg] : BGW, 1998. - S. 55-112
  
• Biomechanische Untersuchungen zur Quantifizierung der Belastung der Wirbelsäule im Pflegeberuf
  Morlock, Michael; Bonin, Veronika; Schneider, Erich
  In: Wolter, Dietmar: Berufsbedingte Erkrankungen der Lendenwirbelsäule. - Berlin, Heidelberg : Springer Berlin / Heidelberg, 1998. - S. 104-136
  
• Der Einfluß unterschiedlicher Zylinderdurchmesser von Implantaten zur lumbalen interkorporellen Wirbelsäulenfusion auf die Kompressionsfestigkeit im FSU-Modell
  Placzek, Richard P.; Birken, Lars; Morlock, Michael; Rüther, Wolfgang; Schneider, Erich
  Biomedical engineering 43 (9): 253-256 (1998)
  Verlags DOI
• Entwicklung einer Methode zur tribologischen Beurteilung faserverstärkter Kunststoffe für den endoprothetischen Einsatz im Kniegelenk
  Birken, Lars; Wimmer, Markus A.; Harris, L.; Pöppel, A.; Morlock, Michael; Schneider, Erich
  In: Mechanische Eigenschaften von Implantatwerkstoffen : 1.Tagung des DVM-Arbeitskreises "Biowerkstoffe", 24. und 25. April 1998 in der Bundesanstalt für Materialforschung und -prüfung (BAM) in Berlin Kongress: Tagung des DVM-Arbeitskreises Biowerkstoffe ; 1 (Berlin) : 1998.04.24-25. - Berlin : DVM, 1998. - S. 95-102
  
• Intramuscular pressure in the erector spinae and intra-abdominal pressure related to posture and load
  Müller, Gerd; Morlock, Michael; Vollmer, Matthias; Honl, Matthias; Hille, Ekkehard; Schneider, Erich
  Spine 23 (23): 2580-2590 (1998)
  Verlags DOI
• Meßsystem zur Belastungsanalyse bei Pflegekräften am Arbeitsplatz und Ergebnisse
  Morlock, Michael; Schneider, Erich
  Low back pain in the health care profession : risk and prevention ; 2. international symposium ; Sept. 10 - 11, 1998, Hamburg, Germany ; proceedings / IVSS, Sektion Gesundheitswesen. - Hamburg : Berufsgenossenschaft für Gesundheitsdienst und Wohlfahrtspflege, 1998. - S. 76-81
  
• Schwingverschleiss von Titan- und Kobald-Chrom-Legierungen gegen Knochenzement
  Wimmer, Markus A.; Heckel, L.; Bluhm, Andrea; Kunze, Joachim; Morlock, Michael; Wening, J.; Schneider, Erich
  In: Mechanische Eigenschaften von Implantatwerkstoffen: 81-88 (1998)
  
• Statistische und biomechanische Untersuchung ausgewählter Aspekte der Begutachtung der BK2108 mittels des Erfassungsbogens EBO2108 des Technischen Aufsichtsdienstes
  Morlock, Michael; Bonin, Veronika; Hansen, I.; Schneider, Erich
  In: Prävention von arbeitsbedingten Gesundheitsgefahren und Erkrankungen : 4. Erfurter Tage / [hrsg. von Siegfried Radandt ...]. - Leipzig : Monade, 1998. - S. 363-396
  
• Vergleichende Untersuchung der mechanischen Eigenschaften unterschiedlicher Implantatsysteme zur internen Wirbelsäulenstabilisierung
  Nassutt, Roman; Hahn, Michael; Delling, H.; Morlock, Michael; Schneider, Erich
  In: Mechanische Eigenschaften von Implantatwerkstoffen : 1.Tagung des DVM-Arbeitskreises "Biowerkstoffe", 24. und 25. April 1998 in der Bundesanstalt für Materialforschung und -prüfung (BAM) in Berlin Kongress: Tagung des DVM-Arbeitskreises Biowerkstoffe ; 1 (Berlin) : 1998.04.24-25. - Berlin : DVM, 1998. - S. 133-140
  

1997

• Analysis of the bobsled and men's luge events at the XVII olympic winter games in Lillehammer
  Brüggemann, Gert Peter; Morlock, Michael; Zatsiorsky, Vladimir M.
  Journal of Applied Biomechanics 13 (1): 98-108 (1997)
  Verlags DOI
• Die Notwendigkeit eines gefäßchirurgischen Prüflabors
  Riepe, Gunnar; Chakfé, Nabil; Whiteley, M.S.; Nassutt, Roman; Morlock, Michael; Schröder, A.; Imig, H.
  Gefäßchirurgie: Preprint (1997)
  
• Die Rolle der Muskulatur bei bandscheibenbedingten Erkrankungen der Wirbelsäule
  Morlock, Michael; Bonin, Veronika; Hansen, I.; Schneider, Erich; Wolter, D.
  In: Prävention von arbeitsbedingten Gesundheitsgefahren und Erkrankungen : 3. Erfurter Tage; [Dokumentation des 3. Symposiums der Erfurter Tage der Berufsgenossenschaft Nahrungsmittel und Gaststätten (BGN), November 1996] / Hrsg. von: Siegfried Radandt ... Kongress: Symposium der Erfurter Tage der Berufsgenossenschaft Nahrungsmittel und Gaststätten ; 3 (Erfurt) : 1996.11.. - Leipzig : Monade, 1997. - S. 209-232
  
• Long-term in vivo alterations of polyester vascular grafts in humans
  Riepe, Gunnar; Loos, J.; Imig, Herbert; Schröder, A.; Schneider, Erich; Petermann, J; Rogge, A.; Ludwig, M.; Schenke, A.; Nassutt, Roman; Chakfé, Nabil; Morlock, Michael
  European Journal of Vascular and Endovascular Surgery 13 (6): 540-548 (1997)
  Verlags DOI
• Muskuläre Stabilisierung und Kreuzschmerz
  Morlock, Michael; Brüggemann, H.-P.
  Österreichische Zeitschrift für physikalische Medizin und Rehabilitation 7 (2): 16-22 (1997)
  
• Trunk muscle fatigue and associated EMG changes during a dynamic iso-inertial test
  Morlock, Michael; Bonin, Veronika; Müller, Gerd; Schneider, Erich
  European Journal of Applied Physiology and Occupational Physiology 76 (1): 75-80 (1997)
  Verlags DOI
• Wie wirkt ein Schockabsorbermaterial in der Einlagenversorgung?
  Morlock, Michael; Matter, H.-P.; Gruber, G.
  Orthopädie-Schuhtechnik 10: 20-25 (1997)
  

1996

• Beschwerden der Lendenwirbelsäule im Pflegeberuf : Untersuchung kausaler Faktoren, erste Ergebnisse
  Morlock, Michael; Bonin, Veronika; Lehner, M.; Meyer, K.; Schneider, Erich
  In: Radandt, Siegfried (Hrsg.): Prävention von berufs- und arbeitsbedingten Gesundhheitsstörungen und Erkrankungen : 2. Erfurter Tage. - Leipzig : monade, 1996. - S. 215-238
  
• Biomechanische Belastungsanalyse mittels Modellen
  Morlock, Michael; Schneider, Erich; Bonin, Veronika
  In: Gollhofer, Albert (Hrsg.): Integrative Forschungsansätze in der Bio & Mechanik : vom 6. - 8. 4. 1995 in Herzogenhorn/Schwarzwald. - Sankt Augustin : Academia-Verl., 1996. - S. 151-172
  
• Efficiency of gait measurement after complex foot trauma
  Mittlmeier, Thomas; Morlock, Michael; Kollmitzer, Josef; Zwick, Ernst Bernhard; Lob, Günter C.
  Foot and ankle surgery 4 (2): 197-208 (1996)
  
• Modern gait anyalsis : a tool to improve shoes, insoles and the understanding of foot function
  Morlock, Michael; Mittlmeier, Thomas
  Acta orthopaedica belgica 62 (1): 11-16 (1996)
  
• Stability of the instrumented spine : dynamic versus rigid instrumentation
  Morlock, Michael; Schneider, Erich; Krönauer, I.; Strempel, A. von
  Spine 10 (3): 397-408 (1996)
  

1995

• Biomechanische Analyse der Belastungen im LWS-Bereich
  Morlock, Michael; Schneider, Erich
  In: Wolter, Dietmar (Hrsg.): Berufskrankheit 2108 : Kausalität und Abgrenzungskriterien. - Berlin: Springer, 1995. - S. 73-93
  
• Plain and abrasive water jet cutting - a new method in joint cartilage repair (submitted)
  Honl, Matthias; Schwieger, Karsten; Schwenke, T.; Morlock, Michael; Wimmer, Markus A.
  Honl, M., Schwieger, K., Schwenke, T., Morlock, M., Wimmer, M.: Plain and Abrasive Water Jet Cutting- A new method in Joint Cartilage Repair (submitted)
  

1994

• Influence of bandage material on pressure distribution under the bandage on the distal forelimb of the galloping horse
  Morlock, Michael; Kobluk, Calvin N.; Jones, J. H.; Rolsten, G. K.; Faass, J. K.
  Gait and Posture 2 (4): 253-260 (1994)
  Verlags DOI
• Messung der Rückenbelastung am Arbeitsplatz
  Morlock, Michael; Schneider, Erich; Bonin, Veronika
  In: Radandt, Siegfried (Hrsg.): Prävention von berufs- und arbeitsbedingten Erkrankungen : Erfurter Tage. - Leipzig: Monade, 1994. - S. 79-106