Publications and Patents

2019

Stable Crack Propagation in Free Standing Thermal Sprayed Al₂O₃ and Al₂O₃-ZrO₂-TiO₂ Coat-ings
M. Neumann, P. Gehre, J. Kübler, N. Dadivanyan, H. Jelitto, G. A. Schneider, C. G. Aneziris:
Ceramics International 45/7A (2019) 8761–8766, DOI: LINK
YSZ Hollow Sphere Photonic Glasses: Tailoring Optical Properties for Highly Saturated Non-Iridescent Structural Coloration
Häntsch, Y., Shang, G., Petrov, A., Eich, M., Schneider, G.A.
Advanced Optical Materials 1900428 (2019). LINK
Fracture Toughness of Porous Materials – Experimental Methods and Data
H. Jelitto, G. A. Schneider:.
Data in brief 23 (2019) 103709, DOI: LINK
Advancing the fabrication of YSZ-inverse photonic glasses for broadband omnidirectional reflector films
do Rosário, J.J., Häntsch, Y., Pasquarelli, R.M., Dyachenko, P.N., Vriend, E., Petrov, A.Y., Furlan, K.P., Eich, M., Schneider, G.A.
Journal of the European Ceramic Society 39, 3353-3363 (2019).LINK
Highly selective photonic glass filter for saturated blue structural color
Shang, G., Häntsch, Y., Furlan, K.P., Janßen, R., Schneider, G.A., Petrov, A., Eich, M.
APL Photonics 4, 046101 (2019). LINK
Data Science Based Mg Corrosion Engineering
Tim Würger, Christian Feiler, Félix Musil, Gregor B. V. Feldbauer, Daniel Höche, Sviatlana V. Lamaka, Mikhail L. Zheludkevich and Robert H. Meißner
Frontiers in Materials, 6 (2019) 53, Publication Date: 05. April 2019, doi: 10.3389/fmats.2019.00053
Hierarchical supercrystalline nanocomposites through the self-assembly of organically-modified ceramic nanoparticles
Berta Domènech, Michael Kampferbeck, Emanuel Larsson, Tobias Krekeler, Büsra Bor, Diletta Giuntini, Malte Blankenburg, Martin Ritter, Martin Müller, Tobias Vossmeyer, Horst Weller, Gerold A. Schneider
Nature Scientific Reports (2019) 9:3435
Nanoindentation-based study of the mechanical behavior of bulk supercrystalline ceramic-organic nanocomposites
Büsra Bor, Diletta Giuntini, Berta Domènech, Michale V. Swain, Gerold A. Schneider
Journal of the European Ceramic Society, xxx (xxxx) xxx

2018

Dielectric breakdown toughness from filament induced dielectric breakdown in borosilicate glass
Pia-Kristina Fischer, Gerold A. Schneider
J. Eur. Ceram. Soc. 38 (2018) 4476-4482
Adsorption of Acetone on Rutile TiO₂: A DFT and FTIRS Study
Tim Würger, Wolfgang Heckel, Kai Sellschopp, Stefan Müller, Andreas Stierle, Yuemin Wang, Heshmat Noei, and Gregor Feldbauer
J. Phys. Chem. C, 2018, 122 (34), pp 19481–19490, Publication Date (Web): August 20, 2018 (Article)
DOI: 10.1021/acs.jpcc.8b04222, LINK
Suppression of material transfer at contacting surfaces: the effect of adsorbates on Al/TiN and Cu/diamond interfaces from first-principles calculations
Gregor Feldbauer, Michael Wolloch, Pedro O. Bedolla, Josef Redinger, András Vernes and Peter Mohn
Journal of Physics: Condensed Matter, 2018, 30 (10), p 105001, DOI: 10.1088/1361-648X/aaac91 LINK
The Role of Carbon and Tungsten Disulphide Nanotubes in the Fracture of Polymer-Interlayered Ceramic Composites: a Micro-scopy Study
K. Livanov, H. Jelitto, G. A. Schneider, H. D. Wagner:.
J. Mater. Sci. 53/8 (April 2018) 5879–5890, DOI: LINK
Comparative Study of Static and Cyclic Fatigue of ZrB₂-SiC Ceramic Composites
M. Lugovy, N. Orlovskaya, V. Slyunyayev, E. Mitrentsis, M. Neumann, C. G. Aneziris, H. Jelitto, G. A. Schneider, J. Kuebler:.
J. Eur. Ceram. Soc. 38/4 (April 2018) 1128–1135, DOI: LINK
A Geometric Model for the Fracture Toughness of Porous Materials
H. Jelitto, G. A. Schneider:.
Acta Mater. 151 (2018) 443–453, DOI: LINK
R-Curve Behavior and Flexural Strength of Zirconia-toughened Alumina and Partially Stabilized Zirconia Composite Laminates
D. Blaese, T. Benitez, M. Barros, H. Jelitto, N. Travitzky, D. Hotza, R. Janssen
Ceramics International 44/12 (2018) 13463–13468, DOI: LINK
Advancing the fabrication of YSZ-inverse photonic glasses for broadband omnidirectional reflector films
J. J. do Rosário, Y. Häntsch, R. M. Pasquarelli, P. N. Dyachenko, E. Vriend, A. Y. Petrov, K. P. Furlan, M. Eich, G. A. Schneider
Journal of the European Ceramic Society (2019) DOI: 10.1016/j.jeurceramsoc.2019.04.028
Highly selective photonic glass filter for saturated blue structural color
G. Shang, Y. Häntsch, K. P. Furlan, R. Janßen, G. A. Schneider, A. Petrov, M. Eich
APL photonics 4/4 (2019) DOI: 10.1063/1.5084138
High-temperature stable inverse opal photonic crystals via mullite-sol-gel infiltration of direct photonic crystals
P. Bueno, K. P. Furlan, D. Hotza, R. Janssen
Journal of the American Ceramic Society 102/2 (2018) DOI: 10.1111/jace.16012
Nanotomography of Inverse Photonic Crystals Using Zernike Phase Contrast
S. Flenner, E. Larsson, K. Furlan, D. Laipple, M. Storm, F. Wilde, R. Blick, G. A. Schneider, R. Zierold, R. Janssen, others
Microscopy and Microanalysis 24/S2 (2018), 148–149 DOI: 10.1017/S1431927618013120
Dataset of ptychographic X-ray computed tomography of inverse opal photonic crystals produced by atomic layer deposition
K. P. Furlan, E. Larsson, A. Diaz, M. Holler, T. Krekeler, M. Ritter, A. Y. Petrov, M. Eich, R. Blick, G. A. Schneider, I. Greving, R. Zierold, R. Janßen
Data in brief 21 (2018), 1924–1936 DOI: 10.1016/j.dib.2018.10.076
Photonic materials for high-temperature applications: Synthesis and characterization by X-ray ptychographic tomography
K. P. Furlan, E. Larsson, A. Diaz, M. Holler, T. Krekeler, M. Ritter, A. Y. Petrov, M. Eich, R. Blick, G. A. Schneider, I. Greving, R. Zierold, R. Janßen
Applied Materials Today 13 (2018), 359–369 DOI: 10.1016/j.apmt.2018.10.002
Self-lubricating composites containing MoS₂: A review
K. P. Furlan, J.D.B. de Mello, A. N. Klein
Tribology International 120 (2018), 280–298 DOI: 10.1016/j.triboint.2017.12.033
On the systematic documentation of the structural characteristics of bovine enamel: A critic to the protein sheath concept
Ezgi D. Yilmaz, Jasmin Koldehoff, Gerold A. Schneider
Dental Materials, Volume 34, Issue 10 (October 2018) Pages 1518-1530
Hierarchical microcrack model for materials exemplified at enamel
H. Özcoban, E.D. Yilmaz, G.A. Schneider
Dental Materials 34 (2018) 69-77
Mechanical Behaviour of Zirconia-Toughened Alumina Laminates with or without Y-PSZ Intermediate Layers
M.D. Barros, P.L. Rachadel, M.C. Fredel, R. Janssen, D. Hotza
Journal of Ceramic Science and Technology, Vol. 9, No. 1, 69-78

2017

Effect of processing route on the microstructure and mechanical properties of hot work tool steel
R. Besler, M. Bauer, K. P. Furlan, A. N. Klein, R. Janssen
Materials Research 20/6 (2017), 1518-1524 DOI: 10.1590/1980-5373-MR-2016-0726
Microstructural Characterization of Solid State Reaction Phase Formed during Sintering of Hexagonal Boron Nitride with Iron
K. P. Furlan, D. R. Consoni, B. Leite, M.V.G. Dias, A. N. Klein
Microscopy and Microanalysis 23/5 (2017), 1061-1066 DOI: 10.1017/S1431927617012478
Metallurgical Aspects of Self-lubricating Composites Containing Graphite and MoS₂
K. P. Furlan, P. da Costa Gonçalves, D. R. Consoni, M.V.G. Dias, G. A. de Lima, J.D.B. de Mello, A. N. Klein
Journal of Materials Engineering and Performance 26/3 (2017), 1135-1145 DOI: 10.1007/s11665-017-2563-4
Low-Temperature Mullite Formation in Ternary Oxide Coatings Deposited by ALD for High-Temperature Applications
K. P. Furlan, T. Krekeler, M. Ritter, R. Blick, G. A. Schneider, K. Nielsch, R. Zierold, R. Janßen .
Advanced Materials Interfaces 4/23 (2017) DOI: 10.1002/admi.201700912
Highly porous α-Al₂O₃ ceramics obtained by sintering atomic layer deposited inverse opals
K. P. Furlan, R. M. Pasquarelli, T. Krekeler, M. Ritter, R. Zierold, K. Nielsch, G. A. Schneider, R. Janssen
Ceramics international 43/14 (2017), 11260-11264 DOI: 10.1016/j.ceramint.2017.05.176
Mechanical Strength and Defect Distribution in Flash Sintered 3YSZ
J. G. Pereira da Silva, A. N. Yamchelou, A. Debris, C. Wieck, H. Jelitto, H. A. Al-Qureshi, R. Janssen:. J. Eur. Ceram. Soc. 37/8 (July 2017) 2901-2905, DOI: Link

Nanoparticle Growth within Clay – Polymer Nacre-Inspired Materials for Improved Catalysis and Plasmonic Detection in Complex Biofluids
E. H. Hill, C. Hanske, A. Johnson, L. Yate, H. Jelitto, G. A. Schneider, L. M. Liz-Marzan:
Metal. Langmuir 33 (2017) 8774–8783, DOI: LINK
How silver segregation stabilizes 1D surface gold oxide: a cluster expansion study combined with ab initio MD simulations
Hoppe, S., Li, Y., Moskaleva, L.V., Müller, S.
Physical Chemistry Chemical Physics 19, 14845-14853 (2017). LINK

Thermostat Influence on the Structural Development and Material Removal during Abrasion of Nanocrystalline Ferrite
Eder, S.J.,Cihak-Bayr, U., Bianchi, D., Feldbauer, G., Betz, G.
ACS Applied Materials & Interfaces 9, 13713-13725 (2017). LINK

Oxygen-vacancy driven elctron localization and itinerancy in rutile-based TiO₂
Lechermann, F., Heckel, W., Kristanovski, O., Müller, S.
Physical Review B, 195159 (2017). LINK

Van der Waals Interaction Really Maters: Energetics of Benzoic Acid on TiO₂ Rutile Surfaces
Heckel, W., Würger, T., Müller, S., Feldbauer, G.
The Journal of Chemistry C, 17207-17214 (2017). LINK

A first principles study on the electronic origins of silver segregation at the Ag-Au (111) surface
Hoppe, S., Müller, S.
Journal of Applied Physics 122, 235303 (2017). LINK

2016

Surface excess elasticity of gold: Ab initio coefficients and impact on the effective elastic response of nanowires
Elsner, B.A.M., Müller, S., Bargmann, S., Weissmüller, J.
Acta Materialia 124, 468-477 (2016). LINK

Shear Strength and Interfacial Toughness Characterization of Sapphire-Epoxy Interfaces for Nacre-Inspired Composites
Behr, S., Jungblut, L., Swain, M.V., Schneider, G.A.
ACS Applied Materials & Interfaces 8, 27322-27331 (2016). LINK

Tailoring Toughness and Mechanical Reliability by Contolled Defects: Nature-Inspired Composite Laminates of Laser-Perforated Yttria-Stabilized Zirconia
Behr, S., Köllner, A., Schneider, G.A.
Advanced Engineering Materials 18, 1877-1883 (2016). LINK

Structure and ordering of oxygen on unreconstructed Ir(100)
Ferstl, P., Schmitt, T., Schneider, M.A., Hammer, L., Michl, A., Müller, S.
Physical Review B 93, 235406 (2016). LINK

Energy and Spectroscopic Line Shape of the C-O Stretch Mode on Ir(111) in the Presence of Organic Molecules
Endlich, M., Michl, A., Hildisch, J., Müller, S., Kröger, J.
The Journal of Physical Chemistry C 120, 11490-11497 (2016). LINK

Reaction-forming of ceramic composites using metallic aluminum
Janssen, R., Travitzky, N., Greil, P., Claussen, N.
in: Engineered Ceramics: Current Status and Future Prospects, First Edition (2016). LINK

Self-assembly of nanoscale lateral segregation profiles
Stania, R., Heckel, W., Kalichava, I., Bernard, C., Kerscher, T.C., Cun, H.Y., Willmott, P.R., Schönfeld, B., Osterwalder, J., Müller, S., Greber, T.
Physical Review B 93, 161402(R) (2016). LINK

A dynamic bifurcation criterion for thermal runaway during the flash sintering of ceramics
Pereira da Silva, J.G., Al-Qureshi, H.A., Keil, F., Janssen, R.
Journal of the European Ceramic Society 36, 1261-1267 (2016). LINK

2015

Sintering Simulation of Macro Porous Alumina
Besler, R., da Silva, Marcel R., do Rosario, J.J., Dosta, M., Heinrich, S., Janssen, R.
Journal of the American Ceramic Society 98, 3496-3502 (2015). LINK

How the aggregation of oxygen vacancies in rutile-based TiO_2-δ phases causes memristive behavior
Heckel, W., Wehlau, M., Maisel, S.B., Frauenheim, T., Knaup, J.M., Müller, S.
Physical Review B 92, 214104 (2015). LINK

High Temperature Behavior of Monodisperse Porosity in Alumina Films
Pasquarelli, R.M., do Rosario, J.J., Rath, L., Schneider, G.A., Janssen, R.
Journal of the European Ceramic Society 35, 3917-3926 (2015). LINK

Synthesis and Thermal Stability of ZrO₂ and YSZ Microspheres
Leib, E.W., Vainio, U., Pasquarelli, R.M., Kus, J., Czaschke, C., Walter, N., Janssen, R., Müller, M., Schreyer, A., Weller, H., Vossmeyer, T.
Journal of Colloid and Interface Science 44, 582-592 (2015). LINK

Temperature Distributions during the Flash Sintering of 8% Yttria-Stabilized Zirconia
Pereira da Silva, J.G., Lebrun, J.-M., Al-Qureshi, H.A., Janssen, R., Raj, R.
Journal of the American Ceramic Society 98, 3525-3528 (2015). LINK

Processing of All-Oxide Ceramic Matrix Composites with RBAO Matrix
Guglielmi, P.O., Garcia, D.G., Hablitzel, M.P., Blaese, D., Goulart, D., Borchert, A., Hotza, D., Janssen, R.
Journal of Ceramic Science and Technology, in print (2015).

Enhanced Structural and Phase Stability of Titania Inverse Opals
Pasquarelli, R.M., Lee, H.S., Kubrin, R., Zierold, R., Petrov, A.Y., Nielsch, K., Schneider, G.S., Janssen, R.
Journal of the European Ceramic Society 35, 3103-3109 (2015). LINK

Mechanical tests and simulations on load sharing in alumina fiber bundles
Neckel, L., Pereira da Silva, J.G., Guglielmi, P., Hotza, D., Al-Qureshi, H.A., Monteldo, O.R.K., Bergmann, C.P., Janssen, R.
Ceramics International 41, 13257-13263 (2015). LINK

Surface Morphology and Fracture Strength Analysis of Nanosecond Ablated Alumina
Gomez, D.R., Hallmann, S., Daniel, C., Fredel, M.C., Janssen, R.
Journal of Ceramic Society of Japan 123, 160-166 (2015). LINK

Size effects and strain localization in atomic-scale cleavage modeling
Elsner, B.A.M., Müller, S.
Journal of Physics: Condensed Matter 27, 345002 (2015). LINK

Solubility and ordering of Ti, Ta, Mo and W on the Al sublattice in Li₂-Co₃Al
Koßmann, J., Hammerschmidt, T., Maisel, S., Müller, S., Drautz, R.
Intermetallics 64, 44-50 (2015). LINK

Large-scale parallel alignment of platelet-shaped particles through gravitational sedimentation
Behr, S., Vainio, U., Müller, M., Schreyer, A., Schneider, G.A.
Scientific Reports 5, 9984 (2015). LINK

Electrical conduction mechanism in bulk ceramic insulators at high voltages until dielectric breakdown
Neusel, C., Jelitto, H., Schneider, G.A.
Journal of Applied Physics 117, 154902 (2015). LINK

ZrO₂ fiber-matrix interfaces in alumina fiber-reinforced model composites
Blaese, D., Garcia, D.E., Guglielmi, P.O., Hotza, D., Fredel, M.C., Janssen, R.
Journal of the European Ceramic Society 35, 1593-1598 (2015). LINK

Microstructure and flexural properties of multilayered fiber-reinforced oxide composites fabricated by a novel lamination route
Guglielmi, P.O., Blaese, D., Hablitzel, M.P., Nunes, G.F., Lauth, V.R., Hotza, D., Al-Qureshi, H.A., Janssen, R.
Ceramics International 41, 7836-7846 (2015). LINK

Highly-Structured, Additive-Free Lithium-Ion Cathodes by Freeze-Casting Technology
Behr, S., Amin, R., Chiang, Y.-M., Tomsia, A.P.
Ceramic Forum International 92, vol. 4, 39-43 (2015).

Self-Assembled Ultra High Strength, Ultra Stiff Mechanical Metamaterials Based on Inverse Opals
do Rosário, J.J., Lilleodden, E.T., Waleczek, M., Kubrin, R., Petrov, A.Y., Dyachenko, P.N., Sabisch, J.E.C., Nielsch, K., Huber, N., Eich, M., Schneider, G.A.
Advanced Engineering Materials (2015). LINK

Thickness-dependence of the breakdown strength: Analysis of the dielectric and mechanical failure
Neusel, C., Jelitto, H., Schmidt, D., Janssen, R., Felten, F., Schneider, G.A.
Journal of the European Ceramic Society 35, 113-123 (2015). LINK

Transparent nanophosphor films with high quantum efficiency through cold compaction
Kubrin, R., do Rosário, J.J., Schneider, G.A.
RSC Advances 5, 25555-25564 (2015). LINK

Influence of structural hierarchy on the fracture behavior of tooth enamel
Yilmaz, E.D., Schneider, G.A., Swain, M.V.
Philosophical Transactions A 373 (2015). LINK

Uniaxial compressive behavior of micro-pillars of dental enamel characterized in multiple directions
Yilmaz, E.D., Jelitto, H., Schneider, G.A.
Acta Biomaterialia (2015). LINK

Damage modelingof small-scale experiments on dental enamel with hierarchical microstructure
Scheider, I., Xiao, T., Yilmaz, E., Schneider, G.A., Huber, N., Bargmann, S.
Acta Biomaterialia (2015). LINK

2014

Nickel-rhenium compound sheds light on the potency of rhenium as a strengthener in high-temperature nickel alloys
Maisel, S., Schindzielorz, N., Mottura, A., Reed, R.C., Müller, S.
Physical Review B 90, 094110 (2014). LINK

Multilayered Fiber-Reinforced Oxide Composites Produced by Lamination of Thermoplastic Prepregs
Guglielmi, P.O., Blaese, D., Hablitzel, M., Nunes, G., Lauth, V.R., Garcia, D., Al-Qureshi, H.A., Hotza, D., Janssen, R.
Advances in Science and Technology 89, 145-150 (2014). LINK

Characterization of Young Modulus and Fracture Toughness of Albite Glass by Different Techniques
Sousa, F., Dal Bó, M., Guglielmi, P.O., Janssen, R., Hotza, D.
Ceramics International 40, 10893-10899 (2014). LINK

Discovery of a thermally persistent h.c.p. solid-solution phase in the Ni-W system
Kurz, S.J.B., Maisel, S., Leineweber, A., Höfler, M., Müller, S., Mittemeijer, E.J.
Journal of Applied Physics 116, 083515 (2014). LINK

Micromechanical characterization of prismless enamel in the tuatara, Sphenodon punctatus
Yilmaz, E.D., Bechtle, S., Özcoban, H., Kieser, J.A., Swain, M.V., Schneider, G.A.
Journal of the Mechanical Behavior of Biomedical Materials 39, 210-217 (2014). LINK

Ab-initio modeling of electromechanical coupling at Si surfaces
Hoppe, S., Michl, A., Weissmüller, J., Müller, S.
Journal of Applied Physics 116, 073507 (2014). LINK

Facile Deposition of YSZ-Inverse Photonic Glass Films
do Rosario, J.J., Dyachenko, P.N., Kubrin, R., Pasquarelli, R.M., Petrov, A.Y., Eich, M., Schneider, G.A.
ACS Applied Materials & Interfaces 6, 12335-12345 (2014). LINK

Phase behavior and mechanical properties of Ni-W studied by first-principles calculations and ab initio based thermodynamics
Schindzielorz, N., Nowak, K., Maisel, S. B., Müller, S.
Acta Materialia 75, 307-315 (2014). LINK

The Role of Hydrogen on the Adsorption Behavior of Carboxylic Acid on TiO₂ Surfaces
Heckel, W., Elsner, B.A.M., Schulz, C., Müller, S.
Journal of Physical Chemistry C 118, 10771-10779 (2014). LINK

2013

_{Towards bio-inspired engineering materials: Modeling and simulation of the mechanical behavior of hierarchical bovine dental structure}
Bargmann, S., Scheider, I., Xiao, T., Yilmaz, E., Schneider, G.A., Huber, N.
Computational Materials Science 79, 390-401 (2013). LINK

Surface Properties of Alloys
Kerscher, T. C., Müller, S., in Surface and Interface Science, Volume 3 (2013), Klaus Wandelt, pp. 1-59, LINK

Fracture toughness and corrosion behaviour of infiltrated Al₂O_3|P - Steel composites
Schlenther, E., Özcoban, H., Jelitto, H., Faller, M., Schneider, G.A., Graule, T., Aneziris, C.G., Kuebler, J.
Materials Science and Engineering: A 590, 132-139 (2013). LINK

Biomechanical adaptation of the bone-periodontal ligament (PDL)-tooth fibrous joint as a consequence of disease
Lin, J.D., Lee, J., Özcoban, H., Schneider, G.A., Ho, S.P.
Journal of Biomechanics (2013). LINK

Dependence of the breakdown strength on thickness and permittivity
Neusel, C., Schneider, G.A.
2013 IEEE International Conference on Solid Dielectrics, Bologna, Italy, 31-35 (2013). LINK

Size-dependence of the dielectric breakdown strength from nano- to millimeter scale
Neusel, C., Schneider, G.A.
Journal of the Mechanics and Physics of Solids (2013). LINK

Sign-inverted response of aluminum work function to tangential strain
Michl, A., Weissmüller, J., Müller, S.
Journal of Physics: Condensed Matter 25, 445012 (2013). LINK

Structure and electrical properties of 0.85(Bi_0.5Na_0.5)TiO₃-0.12BaTiO₃-0.03SrTiO₃ ferroelectric ceramics
Mgbemere, H.E., Fernandes, R.P., Schneider, G.A.
Journal of the European Ceramic Society 33, 3015-3022 (2013). LINK

A novel method for a multi-level hierarchical composite with a brick-and-mortar structure
Brandt, K., Wolff, M.F.H., Salikov, V., Heinrich, S., Schneider, G.A.
Scientific Reports 3, 2322 (2013). LINK

An accidental visualization of the Brillouin zone in an Ni-W alloy via diffuse scattering
Maisel, S.B., Schindzielorz, N., Müller, S., Reichert, H., Bosak, A.
Journal of Applied Crystallography 46, 1211-1215 (2013). LINK

Dielectric behaviour and conductivity of high-filled BaTiO₃-PMMA-composites and the facil route of emulsion polymerization in synthesizing the same
Brandt, K., Neusel, C., Behr, S., Schneider, G.A.
Journal of Materials Chemistry C 1, 3129-3137 (2013). LINK

A giffith type energy release rate model for dielectric breakdown under space charge limited conductivity
Schneider, G.A.
Journal of the Mechanics and Physics of Solids 61, 78-90 (2013). LINK

Interfaces in metamict titanite: the macroscopic mechanical properties after stepwise annealing
Beirau, T., Guglielmi, P., Paulmann, C., Schneider, G.A., Groat, L.A., Malcherek, T., Salje, E.K.H, Bismayer, U.
Phase Transitions: A Multinational Journal 86 (1) (2013). LINK

Biomechanics of a bone-peridontal ligament-tooth fibreous joint
Lin, J.D., Özcoban, H., Greene, J.P., Jang, A.T., Djomehri, S.I., Fahey, K.P., Hunter, L.L., Schneider, G.A., Ho, S.P.
Journal of Biomechanics 46 (3), 443-449 (2013). LINK

2012

Adsorbate-induced segregation: First-principles study for C/Pt₂₅Rh₇₅(100)
Kerscher, T.C., Landgraf, W., Podloucky, R., Müller, S.
Physical Review B 86 (19) 195420 (2012). LINK

A canonical stability-elasticity relationship verified for one million face-centered-cubic structures
Maisel, S.B., Höfler, M., Müller, S.
Nature 491, 740-743 doi: 10.1038/nature11609 (2012). LINK

Stacking of Ceramic Inverse Opals with Different Lattice Constants
Kubrin, R., Lee, H.S., Zierold, R., Petrov, A. Y., Janssen, R., Nielsch, K., Eich, M., Schneider, G.A.
Journal of the American Ceramic Society 95 (7), 2226-2235 (2012). LINK

Mechanical characterization of highly porous β-Si₃N₄ ceramics fabricated via partial sintering & starch addition
Kalemtas, A., Topates, G., Özcoban, H., Mandal, H., Kara, F., Janssen R.
Journal European Ceramic Society, DOI: 10.1016/j.jeurceramsoc.2012.10.036 (2012). LINK

Solutions for Impact over Aerospace Protection
Neckel, L., Hotza, D., Stainer, D., Janssen, R., Lezana, A.G.R., Dias, A., Al-Qureshi, H.A.
Key Engineering Materials 488-489, 25-28 (2012). LINK

Production of oxide ceramic matrix composites by a prepreg technique
Guglielmi, P. O., Nunes, G.F., Hablitzel, M. P., Hotza, D., Janssen, R.
Materials Science Forum 727-728, 556-561 (2012). LINK

RBMAO: A novel route for porous matrix composites
Berti, L.F., Rambo, C.R, Bazzo, E., Janssen, R., Hotza, D.
Materials Science Forum 727-728, 568-573 (2012). LINK

Fiber-matrix compatibility in LZSA glass-ceramic matrix composites
Goushegir, S. M., Guglielmi, P. O., Oliveira, A.P.N., Hotza, D., Janssen, R.
Materials Science Forum 727-728, 562-567 (2012). LINK

Modeling of ceramic oxide fiber bundles mechanical properties
da Silva, J.G.P., Hotza, D., Janssen, R., Al-Qureshi, H. A.
Materials Science Forum 727-728, 574-580 (2012). LINK

Interaction of cartilage and ceramic matrix
Wiegandt, K., Goepfert, C., Pörtner, R., Janssen, R.
Tissue Engineering III: Cell - Surface Interactions for Tissue Culture, Series: Advances in Biochemical Engineering Biotechnology, Springer-Verlag, Berlin-Heidelberg 126, 297-315 (2012). LINK

Ultrasonic characterization of defective porcelain tiles
Eren, E., Kurama, S., Janssen, R.
Boletin de Sociedad Espanola de Ceramica y Vdrio, 51 (4), 211-216 (2012). LINK

Fracture behavior of hydroxyapatite nanofibers in dental enamel under micro-pillar compression
Yilmaz, E.D.; Bechtle, S.; Özcoban, H.; Schreyer, A.; Schneider, G.A.
Scripta Materialia doi: org/10.1016/j.scriptamat.2012.11.007 (2012). LINK

Structural phase transitions and electrical properties of (K_xNa_1-x)NbO₃-based ceramics modified with Mn
Mgbemere, H.E.; Hinterstein, M.; Schneider, G.A.
Journal of the European Ceramic Society 32, 4341-4352 (2012). LINK

First-principles study of hydrogen ordering in lanthanum hydride and its effect on the metal-insulator transition
Kerscher, T.C.; Schöllhammer, G.; Herzig, P.; Wolf, W.; Podloucky, R.; Müller, S.
Physical Review B 86 014107 (2012). LINK

First-principles modeling of temperature- and concentration-dependent solubility in the phase-separating alloy Fe_xCu_1-xReith, D.; Stöhr, M.; Podloucky, R.; Kerscher, T.C.; Müller, S.
Physical Review B 86, 020201(R) (2012). LINK

Automated control of stable crack growth for r-curve measurements in brittle materials
Jelitto H.; Hackbarth, F.; Özcoban, H.; Schneider, G.A.
Experimental Mechanics doi: 10.1007/s11340-012-9622-4 (2012). LINK

Investigation of fracture toughness of modified (K_xNa_1-x)NbO₃ lead-free piezoelectric ceramics
Yilmaz, E.D.; Mgbemere, H.E.; Özcoban, H.; Fernandes, R.P.; Schneider, G.A.
Journal of the European Ceramic Society 32 (12), 3339-3344 (2012). LINK

Thermal radiation transmission and reflection properties of ceramic 3D photovoltaic crystals
Lee, H.S.; Kubrin, R.; Zierold, R.; Petrov, A.Yu; Nielsch, K.; Schneider, G.A.; Eich, M.
Journal of the Optical Society of America B 29, 450-457 (2012). LINK

Computer-controlled stable crack growth as a reliable and fast method to determine subcritical crack growth
Özcoban, H.; Fett, T.; Schneider, G.A.
Journal of Testing and Evaluation 40 (2), 238-242 (2012). LINK PDF

Comparison of mechanical behaviors of inter- and intrarod regions in enamel
Ang, S.F.; Saadatmand, M.; Swain, M.V.; Klocke, A.; Schneider, G.A.
Journal of Materials Research 27 (2), 448-456 (2012). LINK

No miscibility gap in Pt-Rh binary alloys: A first principles study
Maisel, S.B.; Kerscher, T.C.; Müller, S.
Acta Materialia 60 (3), 1093-1098 (2012). LINK

Experimental crack front investigation of unpoled soft lead zirconate titanate (PZT) using the single edge V-notched beam (SEVNB) method
Özcoban, H.; Salikov, V.; Jelitto, H.; Schneider, G.A.
Experimental Mechanics 52 (9), 1565-1568 (2012). LINK

Dielectric breakdown of alumina single crystals
Neusel, C.; Jelitto, H.; Schmidt, D.; Janssen, R.; Felten, F.; Schneider, G.A.
Journal of the European Ceramic Society 32 (5), 1053-1057 (2012). LINK

Fiber-Matrix Compatibility in an All-Oxide Ceramic Composite with RBAO Matrix
Goushegir, S.M.; Guglielmi, P.O.; da Silva, J.G.; Hablitzel, M.P.; Hotza, D.; Al-Qureshi, H.A.; Janssen, R.
Journal of the American Ceramic Society 95, 159-164 (2011). LINK

A method to determine site-specific, anisotropic fracture toughness in biological materials
Bechtle, S.; Özcoban, H.; Yilmaz, E.D.; Fett, T.; Rizzi, G.; Lilleodden, E.T.; Huber, N.; Schreyer, A.; Swain, M.V.; Schneider, G.A.
Scripta Materialia 66 (8), 515-518 (2012). LINK

2011

Towards ceramic 3DOM-materials as novel high-temperature reflective coatings and filters for thermophotovoltaics
Kubrin, R.; Lee, H.S.; Petrov, A.; Janssen, R.; Schneider, G.A.; Bachmann, J.; Nielsch, K.; Eich, M.
IOP Conference Series: Materials Science and Engineering 18, 182004 (2011). LINK

Deutscher Patentantrag: "Verfahren zur Herstellung eines Verbundwerkstoffs, der Verbundwerkstoff und die Verwendung des Verbundwerkstoffs zur Herstellung bestimmter Produkte"
Erfinder: Schneider, G.A.; Heinrich, S.; Wolff, M.; Antonyuk, S.; Salikov, V.; Brandt, K.
Deklarant: Technische Universität Hamburg-Harburg, Aktenzeichen 10 2011 119 939.3, eingereicht am 01.12.2011.

Novel ceramic-polymer composites synthesized by compaction of polymer-encapsulated TiO₂-nanoparticles
Brandt, K; Salikov, V.; Özcoban, H.; Staron, P.; Schreyer, A.; Prado, L.A.S.A.; Schulte, K.; Heinrich, S.; Schneider, G.A.
Composites Science and Technology 72, 65-71 (2011). LINK

Hierarchical flexural strength of enamel: transition from brittle to damage-tolerant behaviour
Bechtle, S.; Özcoban, H.; Lilleodden, E.T; Huber, N.; Schreyer, A.; Swain, M.V.; Schneider, G.A.
Journal of the Royal Society Interface doi: 10.1098/rsif.2011.0498 (2011). LINK

Electrical and structural characterization of (K_xNa_1-x)NbO₃ ceramics modified with Li and Ta
Mgbemere, H. E.; Hinterstein, M.; Schneider, G. A.
Applied Crystallography 44, 1080-1089 (2011). LINK

Large-scale lattice gas monte carlo simulations for the generalized ising model
Kerscher, T.C.; Müller, S; Snell, Q.O; Hart, G.L.W.
2011 IEEE International Parallel & Distributed Processing Symposium, 1234-1241 (2011). LINK

Mechanisms of toughening in silicon nitrides: The roles of crack bridging and microstructure
Fünfschilling, S.; Fett, T.; Hoffmann, M.J.; Oberacker, R.; Schwind, T., Wippler, J.; Böhlke, T.; Özcoban, H.; Schneider, G.A.; Becher, P.F.; Kruzic, J.J.
Acta Materialia, 59(10), 3978-3989 (2011). LINK

Temperature-dependent synchrotron powder diffraction phase strudies of (K_0.37Na_0.52Li_0.03)(Nb_0.87Ta_0.1Sb_0.03)O₃ ferroelectric ceramics
Mgbemere, H. E.; Fernandes, R. P.; Hinterstein, M.; Schneider, G. A.
Zeitschrift für Kristallographie 226(2), 138-144 (2011). LINK

Sub-10-micrometer Toughening and Crack-tip Toughness of Dental Enamel
Ang, S. F.; Schulz, A.; Pacher Fernandes, R.; Schneider, G. A.
Journal of the Mechanical Behavior of Biomedical Materials, 4, 423-432 (2011). LINK PDF

Influence of small cyclic and DC electrical loads on the fracture toughnesss of ferroelectric ceramics
Engert, A. R.; Neumeister, P.; Mecklenburg, M; Jelitto, H.; Balke, H.; Schneider, G. A.
Journal of the European Ceramic Society, 31(4) 531-540 (2011). LINK PDF

2010

Osteoclastic Bioresorption of Biomaterials: Two- and Three- dimensional Imaging and Quantification
Winkler, T.; Hoenig, E.; Huber, G.; Janssen, R.; Fritsch, D.; Gildenhaar, R.; Berger, G.; Morlock, M. M.; Schilling, A. F.
Int. J. of Artifical Organs, 33(4), 198-203 (2010). LINK

Porous Ceramic Structure for Capillary Pumped Loops
Berti, L. F.; Santos, P.; Bazzo, E.; Janssen, R.; Hotza, D.; Rambo, C-.R.
in Current Issues in Organic Chemistry, eds by K. Hadiijanov, V. Valtchev, S. Mintova, G. Vayssilov, Heron Press, Sofia (2010).

Volumetric Analysis of Osteolclastic Bioresprotion of Biomaterials with Different Solubility
Winkler, T.; Hoenig, E.; Gildenhaar, R.; Berger, G.; Fritsch, D.; Janssen, R.; Morlock, M. M. R.; Schilling, A. F.
Acta Biomaterialia 6(10), 4127-4135 (2010). LINK

A Prepreg Approach for Low Cost Oxide-oxide Composites
Guglielmi, P. O.; Nunes, G. F.; Hotza, D.; Janssen, R.
in High Temperature Ceramic Materials and Composites, ed. by W. Krenkel, J. Lamon, Aviso, 420 427 (2010).

Reaction Formed Alumina-Alumina FRCMC
Janssen, R.
in High Temperature Ceramic Materials and Composites, ed. by W. Krenkel, J. Lamon, Aviso, 398- 403 (2010).

3D Bioreactor Cultivation of the Human Hepatoma Cell Line HEPG 2 as a Promising Tool for In Vitro Substance Testing
Goepfert, C.; Scheurer, W.;Rohn, S.;Rathjen, B.; Meyer, S.; Dittmann, A.; Wiegandt, K.; Janssen, R.; Poertner, R.
Int. J. of Artifical Organs, 33(7) 440-440 (2010). LINK

What do we know about surface charges on cracks in ferroelectric ceramics?
Engert, A. R.; Felten, F.; Jelitto, H.; Schneider, G. A.
Proceedings of the IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials, Vol. 24, 9-20 (2010). LINK

Determination of the multiaxial failure criteria for alumina ceramics under tension-torsion test
Nohut, S.; Usbeck, A.; Özcoban, H.; Krause, D.; Schneider, G. A.
Journal of the European Ceramic Society, 30, 3339-3349 (2010). LINK PDF

Predicting the segregation profile of the Pt25Rh75(100) surface from first-principles
Welker, P.; Wieckhorst, O.; Kerscher, T. C.; Müller, S.
J. Phys.: Condens. Matter., 22, 384203 (2010). LINK

Area fraction quantification of ferroelectric domain orientations in BaTiO3 using piezoresponse force microscopy
Fernandes, R. P.; Herber, R.-P.; Kunz, L.; Mgbemere, H. E.; Schneider, G. A.
J. Appl. Phys., 108, 044103 (2010). LINK PDF
Copyright (2010) American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics.

Effect of antimony substitution for niobium on the crystal structure, piezoelectric and dielectric properties of (K_0.5Na_0.5)NbO₃ceramics
Mgbemere, H. E.; Schneider, G. A; Stegk, T. A.
Functional Materials Letters, 3(1), 25-30 (2010). LINK PDF
Electronic version of an article published as Functional Materials Letters, 3, 1, 2010, 25-30 [DOI No: 10.1142/S1793604710000841]

R curves from compliance and optical crack-length measurements
Fünfschilling, S.; Fett, T.; Oberacker, R.; Hoffmann, M. J.; Özcoban, H.; Jelitto, H.; Schneider, G. A.; Kruzic, J. J.
J. Am. Ceram. Soc., 93(9), 2814-2821 (2010). LINK

Estimation of the high-hemperature R curve for ceramics from strength measurements including specimens with focused ion beam notches
Fünfschilling, S.; Fett, T.; Hoffmann, M. J.; Oberacker, R.; Özcoban, H.; Schneider, G. A.; Brenner, P.; Gerthsen, D.; Danzer, R.
J. Am. Ceram. Soc., 93(9), 2411-2414 (2010). LINK

Leading opinion: On the mechanical properties of hierarchically structured biological materials
Bechtle, S.; Ang, S. F.; Schneider, G. A.
Biomaterials, 31(25), 6378-6385 (2010). LINK PDF

Influence of finite notch root radius and optically determined crack length on the measured fracture toughness of brittle materials
Özcoban, H.; Jelitto, H.; Schneider, G. A.
Journal of the European Ceramic Society, 30(7), 1579-1583 (2010). LINK PDF

Mixed-mode stress intensity factors for kink cracks with finite kink length loaded in tension and bending: Application to dentin and enamel
Bechtle, S.; Fett, T.; Rizzi, G.; Habelitz, S.; Schneider, G. A.
Journal of the Mechanical Behavior of Biomedical Materials, 3, 303-312 (2010). LINK PDF

Size-dependent elastic/inelastic behavior of enamel over millimeter and nanometer length scales
Ang, S. F.; Bortel, E. L.; Swain, M. V.; Klocke, A.; Schneider, G. A.;
Biomaterials, 31(7), 1955-1963 (2010). LINK PDF

The fracture behaviour of dental enamel
Bechtle, S.; Habelitz, S.; Klocke, A.; Fett, T.; Schneider, G.A.
Biomaterials, 31(2), 375-384 (2010). LINK PDF

Crack arrest within teeth at the dentinoenamel junction caused by elastic modulus mismatch
Bechtle, S.; Fett, T.; Rizzi, G.; Habelitz, S.; Klocke, A.; Schneider, G. A.;
Biomaterials, 31, 4238-4247 (2010). LINK PDF

2009

Determination of the elastic/plastic transition of human enamel by nanoindentation
Ang, S. F.; Scholz, T.; Klocke, A.; Schneider, G. A.
Dental Materials, 25(11), 1403-1410 (2009). LINK PDF

Investigation of the dielectric and piezoelectric properties of potassium sodium niobate ceramics close to the phase boundary at (K0.35Na0.65)NbO3 and partial substitutions with lithium and antimony
Mgbemere, H. E.; Herber, R.; Schneider, G. A.
Journal of the European Ceramic Society, 29(15), 3273-3278 (2009). LINK PDF

Effect of MnO2 on the dielectric and piezoelectric properties of alkaline niobate based lead free piezoelectric ceramics
Mgbemere, H. E.; Herber, R.; Schneider, G. A.
Journal of the European Ceramic Society, 29(9), 1729-1733 (2009). LINK PDF

Elastic to elastic-plastic transition of Al2O3/TiC ceramics studied by nanoindentation
Zimmermann, K.; Schneider, G. A.
Journal of Materials Research, 24(6), 1960-1966 (2009). LINK

Investigation of phase boundaries in the system (KxNa1-x)1-yLiy(Nb1-zTaz)O3 using high-throughput experimentation (HTE)
Stegk, T. A.; Mgbemere, H.; Herber, R.; Janssen, R.; Schneider, G. A.
Journal of the European Ceramic Society, 29(9), 1721-1727 (2009). LINK PDF

Failure probability of ceramic coil springs
Nohut, S.; Schneider, G. A.
Journal of the European Ceramic Society, 29(6), 1013-1019 (2009). LINK PDF

Chapter "Technical Strategies to Improve Tissue Engineering of Cartilage-Carrier-Constructs"
Pörtner, R.; Goepfert, C.; Wiegandt, K.; Janssen, R.; Ilinich, E.; Paetzold, H.; Eisenbarth, E.; Morlock, M.
in book "Bioreactor Systems for Tissue Engineering", 112, 145-181 (2009).

Bridging stresses from R-curves of silicon nitrides
Fünfschilling, S.; Fett, T.; Hoffmann, M.; Oberacker, R.; Jelitto, H.; Schneider, G.; Härtelt, M.; Riesch-Oppermann, H.
Journal of Materials Science, 44(14), 3900-3904 (2009). PDF

Determination of the crack-tip toughness in silicon nitride ceramics
Fünfschilling, S.; Fett, T.; Hoffmann, M.; Oberacker, R.; Jelitto, H.; Schneider, G.
Journal of Materials Science, 44(1), 335-338 (2009). PDF

Invention registration at the TUHH: "Automatisierte R-Kurven-Messung"
Inventors: Jelitto, H.; Hackbarth, F.; Schneider, G. A.
Internal file number TU 114, September 9th 2009.

German patent application (in preparation): "Verfahren und Vorrichtung zur Bestimmung von Riß-Widerstandskurven"
Inventors: Jelitto, H.; Hackbarth, F.; Schneider, G. A.
Declarant: Hamburg University of Technology and TuTech Innovation GmbH, (corresponding to internal file number TU 114).

Ferroelectric properties of ruthenium-doped lead zinc niobate-lead titanate single crystal
Scholz, T.; Mihailova, B.; Schneider, G. A.; Pagels, N.; Heck, J.; Malcherek, T.; Fernandes, R. P.; Marinova, V.; Gospodinov, M.; Bismayer, U.
Journal of Applied Physics, 106, 074108 (2009). LINK

Modification of biomaterial surface structure for the in vitro generation of osteochondral implants
Goepfert, C.; Fritsch, D.; Richter, T.; Janssen, R.; Poertner, R.
Tissue engineering Part A, BioStar 2008-Science in Exchange Meeting Abstracts. 15(3), 726-727 (2009).

2008

Fracture resistance evaluation of RuO2-based thick film resistor material by in situ crack extension observation in a scanning electron microscope
Dorsch, N. S.; Peshekhodov, I.; Spies, P.; Schneider, G. A.
Acta Materialia, 56(18), 5027-5033 (2008). LINK

Tailor-made ceramic-based components--Advantages by reactive processing and advanced shaping techniques
Janssen, R.; Scheppokat, S.; Claussen, N.
Journal of the European Ceramic Society, 28(7), 1369-1379 (2008). LINK

Rosette screw arms created by ac-domain structures and dislocations in barium titanate during nanoindentation
Schneider, G. A.; Scholz, T.; Espinoza-Beltran, F. J.
Applied Physics Letters, 92(2), 022906-3 (2008). LINK

Indentation size effect in soft PZT ceramics with tetragonal structure close to the MPB
Hurtado-Macias, A.; Munoz-Saldana, J.; Espinoza-Beltran, F. J.; Scholz, T.; Swain, M. V.; Schneider, G. A.
Journal of Physics D: Applied Physics, 41(3), 035407 (2008). LINK

Fracture criterion for a conducting crack in poled PZT-PIC 151 investigated by stable crack growth
Gehrig, F.; Jelitto, H.; Schneider, G. A.
Acta Materialia, 56(2), 222-229, (2008). LINK

High throughput screening of piezoelectric response of ferroelectric thin films with automated scanning probe microscopy
Herber, Ralf-Peter; Schröter, Christian; Wessler, Berit; Schneider, Gerold A.
Thin Solid Films, 516(23), 8609-8612, (2008). LINK

R-curve determination for the initial stage of crack extension in Si3N4
Fett, T.; Fünfschilling, S.; Hoffmann, M. J.; Oberacker, R.; Jelitto, H.; Schneider, G. A.
Journal of the American Ceramic Society, 91(11), 3638-3642 (2008). LINK

Influence of surface modification on the cutting performance of reaction-sintered Al2O3-TiOC Ceramics
Bhattacharya, A. K.; Zimmermann, K.; Schneider, G. A.; Hintze, W.
Journal of the American Ceramic Society, 91(9), 2982-2986 (2008). LINK

High-Throughput synthesis and characterization of bulk ceramics from dry powders
Stegk, T. A.; Janssen, R.; Schneider, G. A.
Journal of Combinatorial Chemistry, 10(2), 274-279 (2008). LINK

Viscous flow model of creep in enamel
Schneider, G. A.; He, Li Hong; Swain, M. V.
Journal of Applied Physics, 103, 014701 (2008). LINK

Estimation of R-curve in WC/Co cermet by CT test
Felten, F.; Schneider, G. A.; Sadowski, T.
International Journal of Refractory Metals and Hard Materials, 26(1), 55-60 (2008). LINK

In Vitro generation of cartilage-carrier-constructs on hydroxylapatite ceramics with different surface structures
Wiegandt, K.; Goepfert, C.; Richter, T.; Fritsch, D.; Janssen, R.; Portner, R.
The Open Biomedical Engineering Journal, 2, 64-70 (2008). PDF

2007

Influence of electric field and mechanical stresses on the fracture of ferroelectrics
Schneider, G. A.
Annual Reviews (Materials Research), 37, 491-538, (2007). Link

Finite-element simulation of cantilever vibrations in atomic force acoustic microscopy
Beltran, F. J. Espinoza; Scholz, T.; Schneider, G. A.; Munoz-Saldana, J.; Rabe, U.; Arnold, W.
Journal of Physics: Conference Series, 61, 293-297 (2007). Link

The dependence of the elastic moduli of reaction bonded alumina on porosity
Puchegger, S.; Dose, F.; Loidl, D.; Kromp, K.; Janssen, R.; Brandhuber, D.; Hüsing, N.; Peterlik, H.
Journal of the European Ceramic Society, 27(1), 35-39 (2007). Link

Surface modification of Al2O3/TiC cutting ceramics
Zimmermann, K.; Schneider, G. A.; Bhattacharya, A. K.; Hintze, W.
Journal of the American Ceramic Society, 90(12), 3773-3778 (2007). Link

Measurement of the total energy release rate for cracks in PZT under combined mechanical and electrical loading
Jelitto, H.; Felten, F.; Swain, M. V.; Balke, H.; Schneider, G. A.
Journal of Applied Mechanics, 74(6), 1197-1211 (2007). Link

Structural Microlayered ceramics with surfaces under tension and compression with increasing apparent fracture toughness
Kuebler, J.; Blugan, G.; Jelitto, H.; Schneider, G. A.; Dobedoe, R.
Key Engineering Materials, 336-338, 2564-2568 (2007). Link

Characterization of ferroelectric domains in morphotropic potassium sodium niobate with scanning probe microscopy
Herber, R.; Schneider, G. A.; Wagner, S.; Hoffmann, M. J.
Applied Physics Letters, 90, 252905 (2007). Link

Surface displacements and surface charges on Ba2CuWO6 and Ba2Cu0.5Zn0.5WO6 ceramics induced by local electric fields investigated with scanning-probe microscopy
Herber, R.; Schneider, G. A.
Journal of Materials Research, 22(1), 193-200, (2007). Link

Nanoindentation initiated dislocations in barium titanate (BaTiO3)
Scholz, T.; McLaughlin, K. K.; Giuliani, F.; Clegg, W. J.; Espinoza-Beltran, F. J.; Swain, M. V.; Schneider, G. A.
Applied Physics Letters, 91, 062903 (2007). Link

Fabrication of porous silicon nitride with high porosity
Shan, S-Y.; Yang, J.-F.; Gao, J. Q.; Zhang, W. H.; Jin, Z. H.; Janssen, R.; Ohji, T.;
Key Engineering Materials, Vol. 336-338, 1105-1108 (2007). Link

2006

Computational of the stress intensity factor and COD for submicron sized indentation cracks
Schneider, G. A.; Fett, T.
Journal of the ceramic Society of Japan, 114, 1044-1048 (2006). Link

Characterization of [alpha]-Al2O3-(Al-Si)3Ti composites
Avraham, S.; Beyer, P.; Janssen, R.; Claussen, N.; Kaplan, W. D.
Journal of the European Ceramic Society, 26(13), 2719-2726 (2006). Link

Thermal stability, structure and mechanical properties of TiSiN coatings prepared by reactive DC magnetron co-sputtering
García-González, L.; Morales-Hernández, J.; Espinoza-Beltrán, F. J.; Muñoz-Saldaña, J.; Scholz, T.; Schneider, G. A.
Materials Science Forum, 509, 93-98 (2006). Link

Indentation size effect in barium titanate with spherical tipped nanoindenters
Scholz, T.; Munoz-Saldana, J.; Swain, M. V.; Schneider, G. A.
Applied Physics Letters, 88(9), 091908-3 (2006). Link

2005

Synthesis of fibrous [beta]-Si3N4 structured porous ceramics using carbothermal nitridation of silica
Yang, J.; Shan, S.; Janssen, R.; Schneider, G.; Ohji, T.; Kanzaki, S.
Acta Materialia, 53(10), 2981-2990 (2005). Link

Zur Bestimmung Bruchmechanischer Kennwerte am Piezo-Aktor
Häusler, C.; Jelitto, H.; Balke, H.; Schneider, G. A.
DVM-Bericht 237, 37. Tagung des DVM-Arbeitskreises Bruchvorgänge, S. 355 (2005). PDF

Experimenteller Aufbau zur Messung der Energiefreisetzungsrate für Risswachstum in PZT unter Elektromechanischer Last
Jelitto, H.; Felten, F.; Schneider, G. A.
DVM-Bericht 237, 37. Tagung des DVM-Arbeitskreises Bruchvorgänge, S. 365 (2005). PDF

Processing and characterisation of three-layer alumina-based composites with enhanced damage tolerance
Arslan, G.; Janssen, R.; Claussen, N.
Journal of the European Ceramic Society, 25(16), 3553-3561 (2005). Link

Cr-Al2O3 layered composites with a high electrical anisotropy prepared by repeated deformation processing
Leverkoehne, M.; Dakskobler, Ales; Valant, M.; Janssen, R.; Kosmac, Tomaz
Journal of the European Ceramic Society, 25(1), 65-72 (2005). Link

Fracture behavior of poled piezoelectric PZT under mechanical and electrical loads
Jelitto, H.; Keßler, H.; Schneider, G. A.; Balke, H.
Journal of the European Ceramic Society, 25(5), 749-757 (2005). Link

In situ investigation of subcritical crack growth in lead zirconate titanate ceramics using atomic force microscopy
Felten, F.; Schneider, G. A.; Knoblauch, V.
Acta Materialia 53(15), 4051-4056 (2005). Link

Measurement of energy release rates for cracks in PZT under electromechanical loads
Jelitto, H.; Felten, F.; Häusler, C.; Kessler, H.; Balke, H.; Schneider, G. A.
Journal of the European Ceramic Society, 25(12), 2817-2820 (2005). Link

Domain rearrangement during nanoindentation in single-crystalline barium titanate measured by atomic force microscopy and piezoresponse force microscopy
Schneider, G. A.; Scholz, T.; Munoz-Saldana, J.; Swain, M. V.
Applied Physics Letters, 86, 192903 (2005). Link

On the evolution of the linear material properties of PZT during loading history--an experimental study
Selten, M.; Schneider, G. A.; Knoblauch, V.; McMeeking, R. M.
International Journal of Solids and Structures, 42(13), 3953-3966 (2005). Link

Porous silicon nitride ceramics prepared by reduction-nitridation of silica
Shan, S.-Y.; Yang, J.-F.; Gao, J.Q.; Zhang, W.-H.; Jin, Z.H.; Janssen, R.; Ohji, T.;
Journal of the American Ceramic Society, 88(9), 2594-2596 (2005). Link

Sliding wear of Cr-Al₂O₃-ZrO₂ and Mo-Al₂O₃-ZrO₂ composites
Scheppokat, S.; Hannink, R.; Janssen, R.; de Portu, G.; Claussen, N.
Journal of the European Ceramic Society, 25(6), 837-845 (2005). Link

2004

An approximation for electrically semipermeable edge cracks and its application to fracture analysis of PZT
Kessler, H.; Balke, H.; Jelitto, H.; Schneider, G. A.
PAMM, 4(1), 282-283 (2004). Link

Das instationäre Temperaturfeld bei der reaktiven Infiltration zur Herstellung von Metall-Keramik-Verbundkörpern
Hussmann, B.; Voges, S.; Eggers, R.; May, M.; Janssen, R.
Chemie Ingenieur Technik, 76(10), 1534-1538 (2004). Link

Calcium phosphate ceramics as substrate for cartilage cultivation
Janssen, R.; Nagel-Heyer, S.; Goepfert, C.; Pörtner, R.; Toykan, D.; Krummhauer, O.; Morlock, M.; Adamietz, P.; Meenen, N.M.; Kriven, W.M.; Kim, D.K.; Tampieri, A.; Celotti, G.
Ceramic Engineering and Science Proceedings, 25(4), 523-528 (2004). Link

Low cost synthesis of alumina reinforced Fe-Cr-Ni alloys
Selchert, T.; Janssen, R.; Claussen, N.
Ceramic Engineering and Science Proceedings, 25(4), 459-464 (2004). Link

Processing and wear behavior of Cr-Al2O3-ZrO2 and Mo-Al2O3-ZrO2 composites
Janssen, R.; Scheppokat, S.; de Portu, G.; Hannink, R.; Claussen, N.
Ceramic Engineering and Science Proceedings, 25(4), 203-209 (2004). Link

Multifunctional metal-ceramic composites by solid free forming
Janssen, R.; Leverköhne, M.; Coronel, J.J.
Ceramic Engineering and Science Proceedings, 25(4), 81-88 (2004). Link

Cartilage cultivation on a calcium phosphate ceramic in a bioreactor system
Nagel-Heyer, S.; Janssen, R.; Goepfert, C.; Adamietz, P.; Meenen, N. M.; Pörtner, R.
Key Engineering Materials, 264-268, 2119-2122 (2004). Link

90° domain configuration and lateral domain wall motion in BaTiO3 evaluated by secondary electron microscopy
Saldana, J. M.; Moreno, J. M. C.; Schneider, G. A.
Key Engineering Materials, 264-268, 1185-1188 (2004). Link

Modeling and measurement of surface displacements in BaTiO[sub 3] bulk material in piezoresponse force microscopy
Felten, F.; Schneider, G. A.; Saldana, J. Munoz; Kalinin, S. V.
Journal of Applied Physics, 96(1), 563-568 (2004). Link

Mechanical characterization of thin amorphous tungsten-carbon (W-x C-y) films prepared by DC-cosputtering
Hurtado Macias, A.; González-Hernández, J.; Muñoz Saldaña, J.; Herrera-Fierro, P.; García-Jiménez, P.; Espinoza Beltrán, F. J.; Scholz, T.; Schneider, G. A.
Vacuum, 76(2-3), 173-176 (2004). Link

Fracture toughness from submicron derived indentation cracks
Scholz, T.; Schneider, G. A.; Munoz-Saldana, J.; Swain, M. V.
Applied Physics Letters, 84(16), 3055-3057 (2004). Link

Quasi-static straight and oscillatory crack propagation in ferroelectric ceramics due to moving electric field: experiments and theory
Niefanger, R.; Pham, V. -B; Schneider, G. A.; Bahr, H. -A; Balke, H.; Bahr, U.
Acta Materialia, 52(1), 117-127 (2004). Link

Invention registration at the TUHH: "Vorrichtung zur Compliance-Messung"
Inventors: Jelitto, H.; Schneider, G. A.; Felten, F.; Schmidt, K.-D.; Scholz, T.; Swain, M.
Internal file number TU 045, April 23^rd 2004.

Processing and properties of sol-gel derived alumina/silicon carbide nanocomposites
U.N.S. Hareesh, M. Sternitzke, R. Janssen, N. Claussen, K.G. Warrier, "Processing and Properties of Sol-Gel Derived Alumina/Silicon Carbide Nanocomposites", J. Am.
Ceram. Soc. 87 [6] (2004) 1024-1030. Link

2003

Reaction synthesis of refractory metal-ceramic composites
Selchert, T.; Janssen, R.; Claussen, N.
Ceramic Engineering and Science Proceedings, 24(4), 175-180 (2003). Link

Pressureless sintering of [beta]-sialon with improved green strength by using metallic Al powder
Zhang, C.; Janssen, R.; Claussen, N.
Materials Letters, 57(22-23), 3352-3356 (2003). Link

Rapid synthesis of Al2O3 reinforced Fe-Cr-Ni composites
Travitzky, N.; Kumar, P.; Sandhage, K. H.; Janssen, R.; Claussen, N.
Materials Science and Engineering A, 344(1-2), 245-252 (2003). Link

Mechanical properties and low-temperature aging of tetragonal zirconia polycrystals processed by hot isostatic pressing
Munoz-Saldana, J.; Balmori-Ramirez, H.; Jaramillo-Vigueras, D.; Iga, T.; Schneider, G. A.
Journal of Materials Research, 18(10) 2415-2426 (2003). Link

Reaktionsgesinterte Mischkeramiken zur Hartbearbeitung
Hintze, W.; Schneider, G. A.; Püschel, A.
VDI-Z Spezialwerkzeuge II/2003 September 26-31 (2003). Link

Ferroelectric domains in coarse-grained lead zirconate titanate ceramics characterized by scanning force microscopy
Munoz-Saldana, J.; Hoffmann, M. J.; Schneider, G. A.
Journal of Materials Research, 18(8), 1777-1786 (2003). Link

Nanoindentation measurements on infiltrated alumina-aluminide alloys
Scholz, T.; May, M.; Swain, M. V.; Schneider, G. A.; Claussen, N.
International Journal of Materials Research, 94, 819-826 (2003). Link

The electrical potential difference across cracks in PZT measured by Kelvin Probe Microscopy and the implications for fracture
Schneider, G. A.; Felten, F.; McMeeking, R. M.
Acta Materialia, 51(8), 2235-2241 (2003). Link

2002

"Fracture mechanical and mechanical properties of piezoelectric ceramics and piezoceramic/electrode interfaces under high electric fields"
Schneider, G. A.
in "Piezoelectric Materials in Devices", edited and published by Nava Setter, Ceramics Laboratory, EPFL, Lausanne, Switzerland, p. 195-210 (2002).

Reaction bonding and reactive sintering: a way to low cost manufacturing of alumina based components
Janssen, R.; Claussen, N.; Scheppokat, S.; Roeger, M.
Materials Integration 4(15), 75-79 (2002).

Toughening of alumina/zirconia ceramic composites with silver particles
Lalande, J.; Scheppokat, S.; Janssen, R.; Claussen, N.
Journal of the European Ceramic Society, 22(13), 2165-2171 (2002). Link

Chapter 5 "Reaction casting of ceramic/metal and ceramic/intermetallic composites"
Sandhage, K. H.; Claussen, N.
"Somiya-Handbook: Ceramic Materials and their Applications", 1 (2002).

Squeeze Cast beta-Si3N4-Al Composites
Claussen, N.; Beyer, P.; Janssen, R.; May, M.; Selchert, T.; Yang, J. F.; Ohji, T.; Kanzaki, S.; Yamakawa, A.
Advanced Engineering Materials, 4(3), 117-119 (2002). Link

Electrical resistivity of Cr-Al2O3 and ZrxAly-Al2O3 composites with interpenetrating microstructure
Leverkoehne, M.; Murthy, V. S. R.; Janssen, R.; Claussen, N.
Journal of the European Ceramic Society, 22(13), 2149-2153 (2002). Link

Phase development of ZrxAly-Al2O3 composites during reaction sintering of Al/ZrO2/Al2O3 powder mixtures
Leverkoehne, M.; Janssen, R.; Claussen, N.
Journal of Materials Science Letters, 21(2), 179-183 (2002). Link

Preparation of BaTiO3 single crystals using the modified SiO2-exaggerated grain growth method
Muñoz Saldaña, J.; Mullier, B.; Schneider, G. A.
Journal of the European Ceramic Society, 22(5), 681-688 (2002). Link

High-resolution characterization of piezoelectric ceramics by ultrasonic scanning force microscopy techniques
Rabe, U.; Kopycinska, M.; Hirsekorn, S.; Saldana, J. Munoz; Schneider, G. A.; Arnold, W.
Journal of Physics D: Applied Physics, 35(20), 2621-2635 (2002). Link

Alumina-Cr and -Nb composites densified by spark plasma sintering
De la Torre, S. D.; García, D. E.; Claussen, N.; Janssen, R.; Nishikawa, Y.; Miyamoto, H.
Materials Science Forum by Trans Tech Publications Inc., Vol. 386-388, 299-304 (2002). Link

2001

"Fracture of Piezoceramics"
Schneider, G. A.
in "Encyclopedia of Materials: Science and Technology", Elsevier, p. 3319-3322 (2001). Link

"Reaction Forming"
Sandhage, K. H.; Claussen, N.
in "Encyclopedia of Materials: Science and Technology", Elsevier, p. 8035-8040 (2001). Link

Reactive casting of metal-ceramic composites
Claussen, N.; Beyer, P.; Janssen, R.; Kumar, P.; Travitzky, N. A.
Polish Ceramic Bulletin, 60, 14-20 (2001).

Stress induced movement of ferroelastic domain walls in BaTiO3 single crystals evaluated by scanning force microscopy
Muñoz-Saldaña, J.; Schneider, G. A.; Eng, L. M.
Surface Science, 480(1-2), L402-L410 (2001). Link

Contribution from ferroelastic domain switching detected using X-ray diffraction to R-curves in lead zirconate titanate ceramics
Glazounov, A. E.; Kungl, H. R. J.; Hoffmann, M. J.; Kolleck, A.; Schneider, G. A.; Wroblewski, T.
Journal of the American Ceramic Society, 84(12), 2921-2929 (2001). Link

Novel in situ-infiltrated Al2O3-metal composites
Claussen, N.; Schneider, G.A.; Travitzky, N.A.
Z. Metallk., 92, 7 (2001).

Analysis and model of the crack bridging mechanisms in a ductile fiber reinforced ceramic matrix composite
Hillig, W. B.; Raddatz, O.; Schneider, G. A.; Claussen, N.
Journal of Materials Science, 36(7), 1653-1663 (2001). Link

Mismatched wear couple zirconium oxide and aluminum oxide in total hip arthroplasty
Morlock, M.; Nassutt, R.; Janssen, R.; Willmann, G.; Honl, M.
The Journal of Arthroplasty, 16(8), 1071-1074 (2001). Link

RBAO: From materials development to commercial components
Janssen, R.; Claussen, N.; Scheppokat, S.; Röger, M.
Ceramic Engineering and Science Proceedings, 22(3), 51-58 (2001). Link

Reactive casting of ceramic composites (r-3C)
Kumar, P.; Travitzky, N. A.; Beyer, P.; Sandhage, K. H.; Janssen, R.; Claussen, R.
Scripta Materialia, 44(5), 751-757 (2001). Link

Novel binder system based on paraffin-wax for low-pressure injection moulding of metal-ceramic powder mixtures
Leverkoehne, M.; Coronel-Hernandez, J.; Dirscherl, R.; Gorlov, I.; Janssen, R.; Claussen, N.
Advanced Engineering Materials, 3(12), 995-998 (2001). Link