Logo Institute of Electrical Power and Energy Technology
Institute of Electrical Power and Energy Technology
Logo Institute of Electrical Power and Energy Technology
Institute of Electrical Power and Energy Technology
DE
EN
Search
DE
EN
Search
More
Publications
Courses
IEET > Staff > Honorary Professor > Prof. Dr.-Ing. Roland Harig

Prof. Dr.-Ing. Roland Harig

Honorary Professor

Contact

Prof. Dr.-Ing. Roland Harig
E-6 Elektrische Energietechnik
  • Elektrische Energietechnik
Office Hours
nach Vereinbarung
Harburger Schloßstraße 36,
21079 Hamburg
Building HS36, Room C2 1.009

Previous activity

until 03/2015
Head of Research Area Optical Measurement Technology (Infrared Measurment Technology) at the Institute of Measurement Technology / TUHH

Publications

TUHH Open Research (TORE)

2012

2011

2008

Courses

Stud.IP
link to course in Stud.IP Studip_icon
Measurement Technology Lab for Mechanical Engineering
Semester:
SoSe 24
Course type:
Practical Course
Course number:
lvL1118_s24
Lecturer:
M. Sc. Mechatronics Finn Jannek Klar, Prof. Dr. Thorsten Kern
Description:
The module "Measurement Technology for Mechanical Engineering" is to be passed by all students with a project-based-learning exam by doing two practical courses (MSR & MT). Both of them need to be passed separately. The MT Lab involves ten experiments, each of which must be passed. The MT & MSR labs may be done in different semesters. To pass each experiment, you need to do five steps (details listed below) - You prepare yourself, reading the material for the experiment and attending the lecture - You execute an ILIAS-test (link in Stud.ip) to get approval for the live experiment - You book a seat in the lab for a time slot, which suits you, go there and receive the material - You execute the experiment in the lab, usually it takes around 1.5 hours for each experiment including recording of all data - You carry your data home and do some small post-processing-tasks on the data, submitting the results via Stud.ip vips We recommend doing one experiment every week. But you are free to arrange timing and sequence yourself. The ten experiments are: 1. mechanical measurements 2. motor power 3. resistive I: potentiometers 4. resistive II: strain-gauge & Wheatstone-bridge 5. capacitive I: general 6. capacitive II: acceleration 7. optical I: light reflection switch 8. optical II: diodes/phototransistors/photoresistors 9. magnetic: hall-sensor 10. piezo-electric Further information and the lab exercises can be found here: https://imek.atlassian.net/wiki/spaces/MLP/pages/12419749/Measurement+Technology+Lab+MT+Lab+new
Miscellaneous:
The module "Measurement Technology for Mechanical Engineering" is to be passed by all students with a project-based-learning exam by doing two practical courses (MSR & MT). Both of them need to be passed separately.

The MT Lab involves ten experiments, each of which must be passed. The MT & MSR labs may be done in different semesters. To pass each experiment, you need to do five steps (details listed below)

- You prepare yourself, reading the material for the experiment and attending the lecture
- You execute an ILIAS-test (link in Stud.ip) to get approval for the live experiment
- You book a seat in the lab for a time slot, which suits you, go there and receive the material
- You execute the experiment in the lab, usually it takes around 1.5 hours for each experiment including recording of all data
- You carry your data home and do some small post-processing-tasks on the data, submitting the results via Stud.ip vips

We recommend doing one experiment every week. But you are free to arrange timing and sequence yourself.

The ten experiments are:
1. mechanical measurements
2. motor power
3. resistive I: potentiometers
4. resistive II: strain-gauge & Wheatstone-bridge
5. capacitive I: general
6. capacitive II: acceleration
7. optical I: light reflection switch
8. optical II: diodes/phototransistors/photoresistors
9. magnetic: hall-sensor
10. piezo-electric

Further information and the lab exercises can be found here:
https://imek.atlassian.net/wiki/spaces/MLP/pages/12419749/Measurement+Technology+Lab+MT+Lab+new
Stud.IP informationen about this course:
Home institute: Institut für Mechatronik im Maschinenbau (M-4)
Registered participants in Stud.IP: 37
Documents: 2
TU Hamburg
Institute of Electrical Power and Energy Technology (ieet) E-6
Prof. Dr.-Ing. Christian Becker
Harburger Schloßstraße 36
21079 Hamburg
E-mail : ieet(at)tuhh.de
Phone : +49 40 42878 3213
Fax : +49 40 42878 2382
Links
Map and Directions
Data Privacy
Imprint